CalFlor GL82114CF Installation guide

Brand
CalFlor
Model
GL82114CF
Type
Installation guide

CalFlor GL82114CF is a specially formulated adhesive designed for laminate and wood floating floor systems. It provides a strong and durable bond, ensuring a secure and long-lasting installation. The adhesive's advanced formula allows for precise application, minimizing the risk of gaps and ensuring a seamless finish. It also offers excellent moisture protection, preventing water damage and maintaining the integrity of your flooring investment.

CalFlor GL82114CF is a specially formulated adhesive designed for laminate and wood floating floor systems. It provides a strong and durable bond, ensuring a secure and long-lasting installation. The adhesive's advanced formula allows for precise application, minimizing the risk of gaps and ensuring a seamless finish. It also offers excellent moisture protection, preventing water damage and maintaining the integrity of your flooring investment.

For additional assistance or service call: 1-888-277-FLOR or visit our website www.cal-or.com
SOLUTIONS FOR YOUR FLOORS
Coverage: 124-200 sq. ft • 16 . oz./474 ml
Directions
For use on laminate or wood oating oor systems.
LAMINATE: Trim tip opening to 1/16” • WOOD: Trim tip
opening to 1/8”
1. Follow your ooring manufacturer’s instructions for
adhesive application.
2. Squeeze a continuous bead of glue onto the top side of
the tongue. Glue must be applied to entire length of seam.
3. For added strength, squeeze a continuous bead of glue
onto the bottom of the groove. This will reduce the chance
of gapping over the life of the oor. DO NOT ll in groove as
this may result in gapping during installation.
4. Assemble planks before glue skins over. For maximum
moisture protection, make sure glue squeezes out of the
joint continuously along the length of all seams.
5. Allow 10-15 minutes for excess glue to set up.
6. Using a plastic putty knife, remove excess glue and wipe
seam with a lightly damp cloth. Keep cloth clean to avoid
smearing glue.
7. Allow to dry for 24 hours before walking on oor. Allow
2-3 days before installing heavy furniture or appliances.
8. Clean Up after 24 hours: For removing installation glue
drips and smears that have dried or cured, use our FilmFree
Advanced Cleaning Formula & Adhesive Remover.
Limited Warranty:
Cal-Flor warrants that this product will be free from manufacturing defects for 12 months from the date of purchase, when applied in
accordance with Cal-Flor ‘s instructions and industry standards. Cal-Flor’s sole liability is to either supply new product or refund the
original purchase price. This limited warranty excludes all other express warranties including the warranties of merchantability for a
particular use or purpose. Cal-Flor will not be liable for any incidental or consequential damages.
The SDS can be found by visiting www.cal-or.com
Variation in coverage is due to ooring type (laminate,
wood, click or T&G), size (thickness, length & width), and
application methods.
20170413
/Type II
Installation Guide
  • Page 1 1

CalFlor GL82114CF Installation guide

Brand
CalFlor
Model
GL82114CF
Type
Installation guide

CalFlor GL82114CF is a specially formulated adhesive designed for laminate and wood floating floor systems. It provides a strong and durable bond, ensuring a secure and long-lasting installation. The adhesive's advanced formula allows for precise application, minimizing the risk of gaps and ensuring a seamless finish. It also offers excellent moisture protection, preventing water damage and maintaining the integrity of your flooring investment.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents