Cordelia Lighting 2620-07 Installation guide

Brand: Cordelia Lighting

Model: 2620-07

Type: Installation guide

Cordelia Lighting 2620-07 is a three-light bathroom fixture with a sleek and modern design. It features a glass shade and a decorative nut finish. The fixture is easy to install and comes with all the necessary hardware. It is perfect for use in bathrooms, powder rooms, and other small spaces.

3-LIGHT BATH FIXTURE

Questions, problems, missing parts? Before returning to the store,

call Cordelia Customer Service

8 a.m. – 6 p.m., EST, Monday – Friday

1-800-345-0542

2620-07

____________________________________

SAFETY INFORMATION

PLANNING THE INSTALLATION

TOOLS REQUIRED

WARNING: Disconnect the power prior to removing or installing a light fixture.

 Before starting installation of this fixture or removal of a previous fixture, disconnect

the power by turning off the circuit breaker or by removing the fuse at the fuse box.

 Consult a qualified electrician if you have any electrical questions or need to replace

the driver.

 If you have any non-electrical questions about this fixture, please contact our

Customer Service Team at 1-800-345-0542.

NOTE: Keep your receipt and these instructions for Proof of Purchase.

 Read all instructions before assembly and installation.

 Before starting installation of the fixture or removal of a previous fixture, disconnect

the power by turning off the circuit breaker or by removing the fuse at the fuse box.

 To avoid damaging this product, assemble it on a soft, non-abrasive surface such as

carpet or cardboard.

Phillips

Screwdriver

Wire

Cutter

Wire

Stripper

Flathead

Screwdriver

Ladder

Safety

Goggles

Electrical

Tape

3 Incandescent

60 W Bulbs or

equivalent CFL

or LED Bulbs

Part

Description

Quantity

Fixture Body

Glass Shade

Frame

Decorative Nut

Hex Nut

Wire Nut

Socket Ring

Mounting Screw

Fixture Screw

Mounting Bracket

CONTENTS (not shown to actual size)

BB CC

INSTALLATION

 Thread the fixture screws (II) into the

provided holes of the mounting bracket

(JJ).

 Thread the hex nuts (EE) onto the fixture

screws (II). Do not tighten the hex nuts

(EE) at this time.

 Pull the supply wires out from the outlet

box and mount the mounting bracket (JJ)

to the outlet box using the mounting

screws (HH).

 Place the fixture body (AA) over the outlet

box and onto the fixture screws (II).

 Adjust the fixture screws (II) until they

protrude out from the fixture body (AA) 1/4

in.

 Remove the fixture body (AA) and secure

the position of the fixture screws (II) by

tightening the hex nuts (EE) against the

mounting bracket (JJ).

NOTE: If you have electrical questions

consult your local electrical code for

approved grounding methods.

 Connect the black supply wire to the

black fixture wire using a wire nut (FF).

 Connect the white supply wire to the

white fixture wire using a wire nut (FF).

 Loop the supply ground wire around the

ground screw on the mounting bracket

and tighten it in place.

 Connect the fixture ground wire to the

supply ground wire using a wire nut

(FF).

 Wrap all wire connections with electrical

tape for a more secure connection.

INSTALLATION (continued)

 Place the fixture body (AA) onto

the fixture screws (II).

 Secure the fixture body (AA) into

place by using the decorative

nuts (DD).

NOTE: Do not exceed a 60 watt

incandescent light bulb or

equivalent SBCFL or LED

bulb.

 Place a frame (CC) onto each

socket of the fixture body (AA),

then put a glass shade (BB) into

each frame. Thread a socket ring

(GG) onto each socket of the

fixture body (AA).

 Screw a bulb into each socket on

the fixture body (AA).

OPERATION

TROUBLESHOOTING

NOTE: Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only

a dry soft cloth to duct or wipe carefully.

EXTERIOR MAINTENANCE

 Use a dry or slightly dampened clean cloth and wipe the surface of the fixture

INTERIOR MAINTENANCE

 Disconnect power to the fixture by turning off the circuit breaker or by removing the

fuse at the fuse box.

 Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.

Problem

Solution

The

light will not turn on.



Make sure the power supply is on.



Test or replace the switch.



Check the wiring.

The

fuse blows or circuit breaker

trips when light is turned on.



Check the wire connections.

 Turn on power at the circuit breaker or fuse box.

 Turn the light switch on to activate the fixture.

CARE AND CLEANING

WARRANTY

WHAT IS COVERED

The manufacturer warrants this lighting fixture to be free from defects in materials and

workmanship for a period of five (5) years from date of purchase. This warranty applies

only to the original consumer purchaser and only to products used in normal use and

service. If this product is found to be defective, the manufacturer’s only obligation, and

your exclusive remedy, is the repair or replacement of the product at the manufacturer’s

discretion, provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed,

set-up, or used in any way not in accordance with the instructions supplied with the

product. This warranty shall not apply to a failure of the product as a result of an accident,

misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating

to faulty material or workmanship. This warranty shall not apply to the finish on any

portion of the product, such as surface and/or weathering, as this is considered normal

wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether

expressed or implied, of fitness for a particular purpose, other than the warranty contained

herein. The manufacturer specifically disclaims any liability and shall not be liable for any

consequential or incidental loss or damage, including but not limited to any labor/expense

costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-800-345-0542.

Page is loading ...

Cordelia Lighting 2620-07 Installation guide

Brand: Cordelia Lighting

Model: 2620-07

Type: Installation guide

Download PDF

report

in other languages

français: Cordelia Lighting 2620-07 Guide d'installation
español: Cordelia Lighting 2620-07 Guía de instalación

Cordelia Lighting 2620-07 Installation guide

Cordelia Lighting 2620-07 Installation guide

in other languages

Related papers

Other documents