happimess HPM2001A Installation guide

30X

STAND

llllI

SCREWS

L KEY TO TIGHTENING

SCREWS

(D)

Step 1 Step 2

Step 1 Put 2 Small Bars in Top BAR section.

Step 2 Put 4 Bars vertically on both side on Base BAR Section and then Screw.

At least Two Persons are required to assemble the Product .

Step 3

Step 4

Step 3 Put Top BAR Section on 4 vertically Standing Bars and then Screw.

Step 4 Put Center Bridge Bar horizontally on Both Side top section small bars and Screw it.

MODEL # HPM2001A

Product Dimensions : 64"X22"X66"