Currys Essentials C1STB10 User manual

Currys Essentials
Brand
Currys Essentials
Model
C1STB10
Category
TV set-top boxes
Type
User manual
S E T - T O P B O X
INSTRUCTION MANUAL
C1STB10
Currys Essentials C1STB10_IB_101006_Zell.indd 1 06/10/2010 5:57 PM
Contents
Unpacking the Set-top Box ............................................................................................3
Product Overview ...........................................................................................................4
Remote Control Overview ...............................................................................................5
- Battery replacement of the remote control .............................................................................6
- Handling the Batteries .....................................................................................................................6
- Handling the Remote Control .......................................................................................................6
- Remote control operation range .................................................................................................6
System Connection ..........................................................................................................7
Connecting to the Mains Socket .....................................................................................7
1. First Time Installation ..................................................................................................8
2. Volume Adjustment .....................................................................................................8
3. Channel Selection ........................................................................................................8
4. EPG (Electronic Program Guide ..................................................................................9
5. Customising the Channel Settings ...........................................................................10
- Creating the Favourite TV/Radio Channel List ..................................................................... 10
- Finding Channels in the TV/Radio Channel List .................................................................. 12
- Sorting Channels in the TV/Radio Channel List ................................................................... 12
- Moving the Channel order in the TV/Radio Channel List ................................................13
- Deleting Channels ..........................................................................................................................14
- Renaming Group ............................................................................................................................ 15
6. Customising the Installation Settings ......................................................................16
- Auto Scan .......................................................................................................................................... 16
- Channel Scan ...................................................................................................................................17
- Tuner Setting ....................................................................................................................................18
- Service Language ........................................................................................................................... 19
7. Customising the Setup Settings ...............................................................................20
- Setting the Timer ............................................................................................................................ 20
- Other Setup Settings ..................................................................................................................... 22
8. Customising the Tools Settings ................................................................................23
Hints and Tips ................................................................................................................24
Specications .................................................................................................................25
Safety Warnings ............................................................................................................26
Currys Essentials C1STB10_IB_101006_Zell.indd 2 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-3
Unpacking the Set-top Box
Remove all packaging from the set-top box. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
If items are missing or damaged, please contact partmaster (UK only).
Tel: 0844 800 3456 for assistance.
1. Set-top Box
3. AAA Battery X 2
5. Instruction Manual
2. Remote Control
4. Quick Start Guide
(P.N.: BM02-003)
(P.N.: BM02-006A-v2)
(P.N.: BM02-008)
(P.N.: BM02-006B-v3)
Currys Essentials C1STB10_IB_101006_Zell.indd 3 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-4
POWER Indicator
RF IN RF LOOP through
IR Receiver
SCART Mains Cable
Front Panel
Rear Panel
Product Overview
Currys Essentials C1STB10_IB_101006_Zell.indd 4 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-5
Remote Control Overview
STANDBY
On/Standby.
TV/RADIO
To go in Radio mode or
in TV mode.
EXIT
Allow you to go back
one step in the menus.
GREEN BUTTON
For interactive function.
BLUE BUTTON
For interactive function.
EPG
Display the EPG
Electronic Program Guide.
SUBTITLE
To enable or disable the
subtitles (DVB).
AUDIO
Select audio: left/right/
stereo/mono.
PAGE DOWN
WIDE
Aspect ratio.
(CH+/CH-) pq
To switch between channels.
Press to navigate up and
down within the menu setup.
OK
Conrm selection in OSD
menu/display TV channel list.
YELLOW BUTTON
For interactive function.
TEXT
Open teletext function.
MUTE
To mute and restore
the sound output.
LAST CH
Switch to previous channel.
FAV
To access to the favourite
list.
PAGE UP
INFO
Press once to display
information about the
current programme. Press
twice to display technical
information about the
current programme
and signal.
RED BUTTON
For interactive function.
0-9 BUTTONS
Enter values and select the
channel directly by entering its
number.
(VOL+/VOL-) tu
To increase and decrease the
volume.
Press to navigate left and right
within the menu setup.
MENU
Opens the menu so that you
can change the settings of your
Digital Box.
Currys Essentials C1STB10_IB_101006_Zell.indd 5 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-6
Battery replacement of the remote control
1. Remove the battery compartment cover.
2. Load two AAA (UM-4 or R03) batteries into the battery
compartment. Close the battery compartment cover.
Remote control operation range
Point the remote control unit within
approx. 6 metres from the remote control sensor on the
set-top box and within 60° in front of the set-top box.
The operating distance may vary depending on the
brightness of the room.
30
º
30
º
6 M
Within
approximately
6 metres (20 feet)
Handling the Batteries
• Take care of your ngernails when you press and hold the battery release tab.
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause re, personal injury or damage to property.
• Install the batteries correctly by following the polarity (+ and -) indications in the bat-
tery compartment.
• When the batteries are exhausted, the remote will not function. Replace both
batteries at the same time with new ones.
• Use only the types of the batteries which are indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types of
batteries.
• Do not dispose of the used batteries as domestic waste. Dispose of them in
accordance with the local regulations.
Handling the Remote Control
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of
excessive heat.
• Remove the battery from the remote control when not in use for a long period of time,
as it could cause corrosion or battery leakage and may result in physical injury and/or
property damage including re.
Install the batteries correctly by
following the polarity (+ and -)
indications in the battery
compartment.
R3”AAA”15
R3”AAA”15
1
3
2
Currys Essentials C1STB10_IB_101006_Zell.indd 6 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-7
System Connection
RF coaxial cable
RF coaxial cable
To RF IN socket
Mains cable
To Mains socket
SCART cable
To SCART
socket
Aerial
To Aerial wall socket
TV
SS
OR
(not included)
(not included)
(not included)
Connecting to the Mains Socket
1. Plug in the mains plug into the mains socket after you have
completed all the connections.
2. The green power indicator on the front panel will illuminate.
3. Switch on your TV.
1. Make sure your TV and any other equipment you are connecting to are switched o.
2. Connect one end of the RF coaxial cable (not supplied) to the aerial socket on the
wall and the other end of the cable to the RF IN socket on the back of the set-top box
receiver.
3. Connect a SCART cable (not supplied) between the TV SCART socket on the back panel
of the set-top box receiver and the SCART socket on your TV.
4. Connect another RF coaxial cable (not supplied) between the RF LOOP socket on the
back panel of the set-top box receiver and the RF IN socket on your TV.
Your SCART cable must be connected to your TV to watch digital TV
from your set-top box.
Currys Essentials C1STB10_IB_101006_Zell.indd 7 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-8
1. First Time Installation
• When your set-top box is switched on for the rst time, an Easy Install Menu will
be displayed. If the below screen does not appear, you will need to select the SCART
input source of your TV.
• Use the tu buttons to select the Region and that you are operating the set-top box.
The OSD Language is set as English.
• Press the q button to highlight the OK on the screen and press the OK button on the
remote control to begin the channel scan.
2. Volume Adjustment
• Press the VOL+/- button to adjust the volume.
• Press the Mute button to switch the sound o. Press the Mute button again or
press the VOL+/- button to cancel this function.
3. Channel Selection
• Press the CH+/- button repeatedly or 0-9 buttons to select the channel.
• Press the OK button to enter the List of Channels. Then use the pq buttons to high-
light and select the channel. Press the OK button to watch.
• Press the Last CH button to return to the channel you previously watched.
Currys Essentials C1STB10_IB_101006_Zell.indd 8 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-9
4. EPG (Electronic Program Guide)
Press the EPG button to display all the information of the Channels.
Press the
1
button
to display the
booking list.
Press the
2
button to switch
between programme list and
event list.
Select an event and
press the OK
button for booking.
Currys Essentials C1STB10_IB_101006_Zell.indd 9 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-10
5. Customising the Channel Settings
Press the Menu button and use the pq buttons to select Channel. Press the OK
button to conrm.
Press the pq buttons to select TV/Radio Channel List and then press the OK
button to conrm.
Creating the Favourite TV/Radio Channel List
You can create up to 8 favourite channel group.
1. In the TV/Radio Channel List, press the pq buttons to select your favourite channel.
Press the
1
button to edit the selected channel, then press the OK button to conrm.
You can see the “3“ icon at the end of program title.
Currys Essentials C1STB10_IB_101006_Zell.indd 10 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-11
2. Press the
1
button to show the Group Menu then press the pq buttons to select a
Group Name which you want to store your favourite channel in.
Press the OK button to conrm. The screen will pop up the below menu.
Press the t u buttons to select “Yes” and then press the OK button to conrm.
3. Switching between the All Channel List and Favourite Channel List
In the TV Channel List, press the t u buttons to switch between All Channel List
and various Favourites Group Channel List.
4. Switching between the dierent Favourites Channel List
Press the FAV button, a Favourites Channel Group List will
be displayed for selection. Press the pq buttons to select the
Group number.
5. Selecting the channel within the Favourites Channel List
After you selected the Favourites Channel Group, press the OK
button to show the channel list and press the pq buttons.
Currys Essentials C1STB10_IB_101006_Zell.indd 11 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-12
Finding Channels in the TV/Radio Channel List
1. In the TV/Radio Channel List, press the
2
button to display the keypad. Press the
pqt ubuttons to select characters and press the OK button after keying in the rst
few character of the channel title.
2. Press the pqt ubuttons to select OK on the keypad and press the OK button to
conrm. Your desired channel will be listed.
Sorting Channels in the TV/Radio Channel List
1. In the TV/Radio Channel List, press the
3
button to sort channels.
2. Press the pq buttons to move the highlight and press the OK button to select the
sorting method such as Default/Name (A-Z)/ Name (Z-A)/ FTA/ Lock.
Currys Essentials C1STB10_IB_101006_Zell.indd 12 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-13
Moving the Channel order in the TV/Radio Channel List
1. In the TV/Radio Channel List, press the
4
button to select and move the channel.
You will nd a preview screen on the right side of the selected channel as above exam-
ple.
2. Press the pq buttons to move the selected channel to the position that you want to
place it.
Press the OK button to conrm. The screen will pop up the below menu.
Press the t u buttons to select “Yes” and then press the OK button to conrm.
Currys Essentials C1STB10_IB_101006_Zell.indd 13 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-14
Deleting Channels
1. Press the Menu button and use the pq buttons to select Channel. Press the
OK button to conrm.
2. Press the pq buttons to select Delete All Favorites and then press the OK button.
Press the t u buttons to select “Yes” then press the OK button to delete all favourite
channels.
Press the pq buttons to select Delete All and then press the OK button.
Input password “0000” and press the t u buttons to select “Yes” then press the OK
button to delete all tuned channels.
Currys Essentials C1STB10_IB_101006_Zell.indd 14 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-15
Renaming Group
1. Press the Menu button and use the pq buttons to select Channel. Press the
OK button to conrm.
2. Press the pq buttons to select Group Rename and then press the OK button to
conrm. The group list will be shown on the screen.
3. Press the pq buttons to select the group you want to rename. Press the OK button to
conrm and display the keypad.
4. Press the pqt u buttons to select characters and press the OK button to keying in
the selected character.
Press the pqt u buttons to select OK on the keypad and press the OK button
to conrm the group name you have entered.
Currys Essentials C1STB10_IB_101006_Zell.indd 15 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-16
6. Customising the Installation Settings
Auto Scan
1. Press the Menu button and use the pq buttons to select Installation. Press the
OK button to conrm.
2. Press the pq buttons to select Auto Scan and then press the OK button to conrm.
3. Press the t u buttons to select All/Free.
Press the pq buttons to highlight Search and press the OK button to conrm
the channel search. Press the t u buttons to select “Yes” then press the OK button to
start the channel scanning.
When Auto Scan nished, the last channel on the list will be shown on the screen.
Currys Essentials C1STB10_IB_101006_Zell.indd 16 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-17
Channel Scan
1. Press the Menu button and use the pq buttons to select Installation. Press the
OK button to conrm.
2. Press the pq buttons to select Channel Scan and then press the OK button to
conrm.
3. Press the pqt u buttons set the appropriate parameter. Press the q button to
highlight Search and press the OK button to start the channel scanning.
After the Channel Scan nished, the last channel on the list will be shown on the
screen.
Currys Essentials C1STB10_IB_101006_Zell.indd 17 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-18
Tuner Setting
1. Press the Menu button and use the pq buttons to select Installation. Press the
OK button to conrm.
2. Press the pq buttons to select Tuner Setting and then press the OK button to
conrm.
3. Press the t u buttons to power on or power o the tuner.
Currys Essentials C1STB10_IB_101006_Zell.indd 18 06/10/2010 5:57 PM
Safety Warnings OperationHints and Tips
and Specifications
Set-up
Product Overview
GB-19
Service Language
1. Press the Menu button and use the pq buttons to select Installation. Press the OK
button to conrm.
2. Press the pq buttons to select Service Language and then press the OK button to
conrm.
3. Press the t u buttons to select the Service Language: English, Gaelic, Welsh.
4. Press the pq buttons to highlight the Update button and press the OK button to
change the language for the TV Program’s name.
Currys Essentials C1STB10_IB_101006_Zell.indd 19 06/10/2010 5:57 PM
Product Overview OperationSet-up Hints and Tips
and Specifications
Safety Warnings
GB-20
7. Customising the Setup Settings
Press the MENU button to display the Main Menu. Press the pq buttons to select the
Setup option and press the OK button to enter the System Setup.
Setting the Timer
1. Press the pq buttons to select Timer Setting and then press the OK button to
conrm.
2. There are two options under Timer Setting: Program Timer and Sleep Timer.
Currys Essentials C1STB10_IB_101006_Zell.indd 20 06/10/2010 5:57 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Currys Essentials C1STB10 User manual

Currys Essentials
Brand
Currys Essentials
Model
C1STB10
Category
TV set-top boxes
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents