AMS AS1310 User guide

Type
User guide
austriamicrosystems AG
is now
ams AG
The technical content of this austriamicrosystems application note is still valid.
Contact information:
Headquarters:
ams AG
Tobelbaderstrasse 30
8141 Unterpremstaetten, Austria
Tel: +43 (0) 3136 500 0
e-Mail: ams_sales@ams.com
Please visit our website at www.ams.com
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 1 - 7
Application Note: AN01 Demoboard
AS1310
Ultra Low Quiescent Current,
Hysteretic DC-DC Step-Up Converter
Preliminary Application Note
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 2 - 7
Table of Contents
1 FURTHER APPLICATIONS ................................................................................................................... 3
2 REVISION STATUS .............................................................................................................................. 3
3 GENERAL DESCRIPTION ..................................................................................................................... 3
3.1 AS1310 Evalboard jumper and device locations .......................................................................................... 3
4 GETTING STARTED ............................................................................................................................. 4
5 AS1310 EVALBOARD BOM ................................................................................................................. 4
6 PCB LAYER STACKUP ........................................................................................................................ 5
7 DEMOBOARD SCHEMATIC .................................................................................................................. 5
8 DEMOBOARD LAYOUT ........................................................................................................................ 6
9 ORDERING INFORMATION .................................................................................................................. 7
10 COPYRIGHT ........................................................................................................................................ 7
11 DISCLAIMER ....................................................................................................................................... 7
AS3610
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 3 - 7
1 Further Applications
Visit our home-page: http: //www.austriamicrosystems.com
2 Revision status
AS1310 AN01 – Demoboard Rev.: 1V1
AS1310 Demoboard – Layout Rev.: 2V1
AS1310 Demoboard – Schematic Rev.: 2V1
3 General Description
3.1 AS1310 Evalboard jumper and device locations
Listed below are the various jumpers, connectors and components.
Connector Description
Label Name Description Info
A VIN Supply Voltage
Supply voltage ranging from 0.7V to 3.6V
B GND Ground
C VOUT Output Voltage Output voltage ranging from 1.8V to 3.3V
A
B
C
D
E
F
G
H
J
I
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 4 - 7
Measurement Point Description
Label Name Description Info
D VIN Supply Voltage
Measurement Points
E LX External Inductor
F VOUT Output Voltage
G
GND
Ground
H LBO LBO/POK output
I EN Enable
ON: The AS1310 is enabled
OFF: The AS1310 is disabled
No Jumper: Connect a valid enable signal
to the pin in the middle
J LBI Low Battery Input
Vin: The LBI monitors VIN via a resistive divider
LBO goes low, if LBI threshold (0.6V) is
reached
GND: The LBI pin is connected to GND
LBO works like a POK
This Jumper may not be left floating
4 Getting Started
The AS1310 Demoboard is designed to work with all available AS1310 versions.
With the resistor divider R1/R2 it is possible to adjust the threshold of the monitored Vin.
On this Demoboard there are no resistors R1/R2 mounted. This should be done by the user.
5 AS1310 Evalboard BOM
Listed below are the various connectors and jumpers.
Ref.
Function Value Description Manufacturer Mfg. Order Nr.
C1 Input Capacitor 22µF 0805 / X5R / 6.3V Murata GRM21BR60J226ME39L
C2 Output Capacitor 22µF 0805 / X5R / 6.3V Murata GRM21BR60J226ME39L
Cref Reference cap 100nF 0603 / X7R / 6.3V Murata GRM188R71C104KA01D
L1 Coil 6.8µH 421m / 0.62A / 2.0x1.9x1.0mm Coilcraft XPL2010-682M
R1 Resistor (LBI) not mounted
R2 Resistor (LBI) not mounted
Rpok
POK pull-up 100k 0603/ ±5% diverse
U1 DC/DC Step-up TQFN 2x2mm 8-pin austriamicrosystems AS1310-BTDT-xx
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 5 - 7
6 PCB Layer Stackup
7 Demoboard Schematic
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 6 - 7
8 Demoboard Layout
Layout (top view)
Layout (bottom view)
ams AG
Technical content still valid
AS1310 AN01 – Demoboard
www.austriamicrosystems.com Revision 1.1 - 27.03.2012 7 - 7
9 Ordering Information
Evalboard AS1310 version SAP number
AS1310-BTDT-18 DEMOBOARD Vout = 1.8V 990600444
AS1310-BTDT-20 DEMOBOARD Vout = 2.0V 990600445
AS1310-BTDT-25 DEMOBOARD Vout = 2.5V 990600446
AS1310-BTDT-25 DEMOBOARD Vout = 2.7V 990600447
AS1310-BTDT-30 DEMOBOARD Vout = 3.0V 990600448
AS1310-BTDT-33 DEMOBOARD Vout = 3.3V 990600449
10 Copyright
Copyright © 1997-2011, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe.
Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted, merged,
translated, stored, or used without the prior written consent of the copyright owner.
All products and companies mentioned are trademarks or registered trademarks of their respective companies.
11 Disclaimer
Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions
appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by
description regarding the information set forth herein or regarding the freedom of the described devices from patent
infringement. Austriamicrosystems AG reserves the right to change specifications and prices at any time and
without notice. Therefore, prior to designing this product into a system, it is necessary to check with
austriamicrosystems AG for current information.
This product is intended for use in normal commercial applications. Applications requiring extended temperature
range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or
lifesustaining equipment are specifically not recommended without additional processing by austriamicrosystems
AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from
the standard production flow, such as test flow or test location.
The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However,
austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited
to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special,
incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or
use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of
austriamicrosystems AG rendering of technical or other services.
Contact Information
Headquarters
austriamicrosystems AG
Tobelbader Strasse 30
Schloss Premstaetten
A-8141 Unterpremstaetten, Austria
T. +43 (0) 3136 500 0
F. +43 (0) 3136 5692
For Sales Offices, Distributors and Representatives, please visit:
http://www.austriamicrosystems.com/contact
ams AG
Technical content still valid
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

AMS AS1310 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI