LG 24MP68VQ-P Owner's manual

www.lg.com

LED LCD Monitor (LED Monitor) Model List

Please read this manual carefully before operating

your set and retain it for future reference.

Owner's Manual

LED LCD MONITOR

(LED MONITOR*)

*LG LED Monitors are LCD Monitors with LED Backlighting.

22MP68VQ

23MP68VQ

24MP6 8VQ

27MP68VQ

ENGLISH

2

CONTENTS

LICENSE ---------------------------- 3

ASSEMBLING AND PREPARING - 4

- Unpacking -------------------------------------- 4

- Supported Drivers and Software -------------- 5

- Parts and buttons ----------------------------- 6

- Moving and Lifting the Monitor --------------- 8

- Setting up the Monitor set ------------------- 9

USING THE MONITOR SET ------ 14

- Connecting to a PC --------------------------- 14

- Connecting to AV Devices --------------------15

- Connecting to External Devices -------------- 16

CUSTOMIZING SETTINGS ------ 17

- Customizing settings ------------------------- 18

Menu Settings

-Quick Settings

-Picture

-General

-Auto Configuration

-Reset

TROUBLESHOOTING ------------ 25

SPECIFICATIONS ---------------- 27

- Preset Modes (Resolution) ------------------- 31

- Indicator --------------------------------------- 31

3

ENG

ENGLISH

LICENSE

Each model has different licenses. Visit

www.lg.com

for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing Ad-

ministrator, Inc.

The following content is only applied to the monitor which is sold in Europe market and which needs to

meet the ErP Directive:

* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no

adjustment to display.

* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

4

ENG

ENGLISH

27MP67VQ24MP67VQ22MP67VQ 23MP67VQ

22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and accessories.

y

Do not use any unapproved accessories to ensure the safety and product life span.

y

Any damages or injuries by using unapproved accessories are not covered by the warranty.

y

The accessories supplied with your product may vary depending on the model.

y

Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions.

CAUTION

NOTE

CD / Card

( Depending on the country )

Power Cord

AC-DC Adapter

or

D-SUB Cable

( This cable is not included in all

countries. )

DVI-D Cable

( This cable is not included in all

countries. )

27MP67VQ24MP67VQ22MP67VQ 23MP67VQ

22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ

Stand Body

Stand Base

HDMI Cable

( This cable is not

included in all countries. )

Cable Holder

5

ENG

ENGLISH

Supported Drivers and Software

You can download and install the latest version from the LGE website (

www.lg.com

).

Drivers and Software Installation Priority 22MP68VQ , 23MP68VQ

24MP68VQ , 27MP68VQ

Monitor Driver Recommended O

OnScreen Control Recommended O

6

ENG

ENGLISH

Parts and buttons

Joystick Button/

Power Indicator

y

On : power is on

y

Off : power is off

y

The joystick button is located at the bottom of the monitor.

NOTE

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with

your finger.

Basic Functions

Power on

Press the joystick button once with your finger to turn on the

monitor.

Power off

Press and hold the joystick button once with your finger to turn off

the monitor.

◄/►

Volume

Control

You can control the volume by moving the joystick button left/right.

7

ENG

ENGLISH

Parts and buttons

Input Connector

8

ENG

ENGLISH

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these

instructions to prevent the monitor from being

scratched or damaged and to ensure safe trans-

portation regardless of its shape or size.

y

As far as possible, avoid touching the moni-

tor screen. This may result in damage to the

screen or some of the pixels used to create

images.

y

It is advisable to place the monitor in the

original box or packing material before at-

tempting to move it.

y

Before moving or lifting the monitor, discon-

nect the power cord and all cables.

y

Hold the top and bottom of the monitor frame

firmly. Do not hold the panel itself.

y

When holding the monitor, the screen should

face away from you to prevent it being

scratched.

y

When moving the monitor, avoid any strong

shock or vibrations to the product.

y

When moving the monitor, keep it upright,

never turn the monitor on its side or tilt it

sideways.

CAUTION

y

If you use the monitor panel without the

stand base, its joystick button may cause

the monitor to become unstable and fall,

resulting in damage to the monitor or human

injury. In addition, this may cause the joystick

button to malfunction.

9

ENG

ENGLISH

Setting up the Monitor set

Attaching the Stand Base

Detaching the Stand Base

2

1

3

2

1

3

Stand Body

Stand Base

Stand Body

Stand Base

Stand Body

y

To protect the screen from scratches, cover

the surface with a soft cloth.

CAUTION

1

* If it is difficult to remove, you can push the

Latch with a small flat-head screw driver or a

flat-headed tool and disassemble as shown

below.



2

1

3

Stand Base

10

ENG

ENGLISH

y

Illustrations in this document represent typical

procedures, so they may look different from

the actual product.

y

Do not carry the monitor upside down by just

holding the stand base. This may cause the

monitor to fall off the stand and could result in

personal injury.

y

When lifting or moving the monitor, do not

touch the monitor screen. The force applied

to the monitor screen may cause damage to

it.

y

If you use the monitor panel without the stand

base, its joystick button may cause the moni-

tor to become unstable and fall, resulting in

damage to the monitor or human injury. In

addition, this may cause the joystick button to

malfunction.

Mounting on a table

1

Lift and tilt the Monitor set into its upright

position on a table.

Leave a 100 mm (3.94 inches) space from the

wall for proper ventilation.

2

Connect the AC-DC Adapter and Power Cord

to a wall outlet.

or

CAUTION

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

11

ENG

ENGLISH

Using the cable holder

3

Press the joystick button on the bottom of the

monitor to turn on the monitor.

Unplug the power cord before moving the

Monitor to another location. Otherwise electric

shock may occur.

CAUTION

Cable holder

When you adjust the angle, do not hold the

bottom of the Monitor set frame as shown on

the following illustration, as may injure your

fingers.

Do not touch or press the screen when

adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor

screen can detach from stand base and injure

your body.

WARNING

Tilt from +15 to -2 degrees up or down to adjust

the angle of the Monitor set to suit your view.

NOTE

Front Rear

12

ENG

ENGLISH

Using the Kensington security system

The Kensington security system connector is

located at the back of the Monitor set. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com

.

Connect the Kensington security system cable

between the Monitor set and a table.

The Kensington security system is optional.

You can obtain it from most electronics stores.

NOTE

13

ENG

ENGLISH

To install the monitor to a wall, attach a wall mount-

ing bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely

fixed to the monitor and to the wall.

1 If you use screw longer than standard, the moni-

tor might be damaged internally.

2 If you use improper screw, the product might be

damaged and drop from mounted position.

In this case, LG Electronics is not responsible

for it.

Installing to a wall

Install the monitor at least 100 mm (3.94 inches)

away from the wall and leave about 100 mm (3.94

inches) of space at each side of the monitor to

ensure sufficient ventilation. Detailed installation

instructions can be obtained from your local retail

store. Please refer to the manual to install and set

up a tilting wall mounting bracket.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

y

Unplug the power cord before moving or in-

stalling the monitor to avoid electric shocks.

y

Installing the monitor on the ceiling or on a

slanted wall may result in the monitor falling

off, which could lead to injury. Please use

the genuine LG wall mounting bracket. For

more information, contact your local retail

store or a qualified installer.

y

Applying excessive force when fastening

screws may cause damage to the moni-

tor. Damage caused in this way will not be

covered by the product warranty.

y

Use the wall mounting bracket and screws

that conform to the VESA standard. Dam-

age caused by the use or misuse of inap-

propriate components will not be covered

by the product warranty.

y

Screw length from outer surface of back

cover should be under 8mm(0.31 inches).

y

Use the screws specified by the VESA stan-

dard.

y

The wall mount kit includes the installation

guide and all necessary parts.

y

The wall mounting bracket is optional. The

accessories can be purchased at your local

retail store.

y

The length of the screw may differ for each

wall mounting bracket. Ensure the correct

length screw is used.

y

For more information, please refer to the

user manual for the wall mounting bracket.

CAUTION

NOTE

Wall mount Pad

Back Cover

Standard screw:

Max.8mm(0.31 inches)

y

Wall Mount (A x B)

A

B

Model

22MP68VQ

23MP68VQ

24MP68VQ

27MP68VQ

Wall Mount (A x

B)

75 x 75 100 x 100

Standard screw

M4 x L10

Number of

screws

4

Wall Mount Plate

(Optional)

LSW 149

14

ENGLISH

USING THE MONITOR SET

Connecting to a PC

y

Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected

device that users connect to a PC and turn

on, without device configuration or user

intervention.

D-SUB connection

Transmits analog video from your PC to the

Monitor set. Connect the PC and the Monitor set

with the supplied D-sub 15 pin signal cable as

shown in the following illustrations.

y

Mac adapter

For Apple Macintosh use, a separate plug

adapter is needed to change the 15 pin

high density (3 row) D-SUB VGA connector

on the supplied cable to a 15 pin 2 row

connector.

y

When using a D-Sub signal input cable

connector for Macintosh

NOTE

HDMI connection

Transmits the digital video and audio signals from

your PC to the Monitor set. Connect the PC and

the Monitor set with the HDMI cable as shown in

the following illustrations.

NOTE

DVI-D connection

Transmits a digital video signal from your PC to

the Monitor set. Connect the PC and the Monitor

set with a DVI cable as shown in the following

illustrations.

y

If you use HDMI PC, it can cause compatibility

problem.

y

Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

y

Recommended HDMI cable types

- High-Speed HDMI

®

/

TM

Cable

- High-Speed HDMI

®

/

TM

Cable with Ethernet

15

ENG

ENGLISH

y

Connect the signal input cable

and tighten it by turning the

screws clockwise.

y

Do not press the screen with

your finger for a long time as this may

result in temporary distortion on the screen.

y

Avoid displaying a fixed image on the

screen for a long period of time to prevent

image burn. Use a screensaver if possible.

CAUTION

y

When you want to use two PC in our Monitor,

please connect the signal cable(D-SUB/

DVI-D/HDMI) respectively in Monitor set.

y

If you turn the Monitor set on while it is cold,

the screen may flicker. This is normal.

y

Some red, green, or blue spots may appear

on the screen. This is normal.

NOTE

Connecting to AV Devices

HDMI connection

Transmits the digital video and audio signals from

your AV devices to the monitor. Connect your AV

device to the monitor with the HDMI cable as il-

lustrated below.

NOTE

y

If you use HDMI PC, it can cause compatibility

problem.

y

Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

y

Recommended HDMI cable types

- High-Speed HDMI

®

/

TM

Cable

- High-Speed HDMI

®

/

TM

Cable with Ethernet

16

ENGLISH

Connecting to External Devices

Peripheral device connection

Connect peripheral devices to the monitor using

headphone ports.

y

Peripheral devices are sold separately.

y

Cables with angled plugs may have clear-

ance issues, use straight plugs when pos-

sible.

Angle Type Straight Type

NOTE

y

Headphones or speakers may not work nor-

mally, depending on the server PC settings.

(sold separately)

17

ENG

ENGLISH

CUSTOMIZING SETTINGS

Activating the Main Menu

Picture Mode

Joystick Button

Picture Mode

1

Press the joystick button on the bottom of the monitor.

2

Move the joystick up/down (▲/▼) and left/right (◄/►) to set the options.

3

Press the joystick button once more to exit the main menu.

Main Menu Description

Menu Configures the screen settings.

Picture Mode Select picture mode to achieve the best display effect.

Input

You can operate the change of input sig nals.

• When two input signals over are con nected and select the

input menu, input signal (D-SUB/DVI-D/HDMI) will be changed

sequentially.

• When only one signal is connected, it is automatically detected. The

default setting is D-SUB.

Monitor off Turns off the monitor.

Exit Exits the main menu.

Main Menu Features

Button Menu Status Description

Picture Mode

Main menu disabled Enables the main menu.

Main menu enabled

Exits the main menu.

(Holding down the button to turn off the monitor. You can turn off the monitor

this way at any time, including when the OSD is on.)

Picture Mode

◄

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the menu features.

►

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the input feature.

Picture Mode

▲

Main menu disabled Enables the main menu.

Main menu enabled Enters the Picture Mode feature.

▼

Main menu disabled Enables the main menu.

Main menu enabled Turns off the monitor.

18

ENG

ENGLISH

Each option is described below.

Customizing settings

Menu Settings

-Quick Settings

1

To view the

OSD menu

, press the

joystick button

at

the

bottom of the monitor and then enter the

Menu

.

2

Go to

Quick Settings >

Brightness

by moving the

joystick.

3

Configure the options following the instructions that

appear in the bottom right corner.

4

To return to the upper menu or set other menu items,

move the joystick to ◄ or pressing ( / OK) it.

5

If you want to exit the OSD menu, move the joystick

to ◄ until you exit.

Do you want to Auto Confuguration?

Menu > Quick Settings Description

Brightness

Adjusts the color contrast and brightness of the screen.

Contrast

Volume Adjusts the volume.

NOTE

y

You can adjust Mute/ Unmute by moving the joystick button

to ▼ in the Volume menu.

Ratio Adjusts the screen ratio.

Wide Displays the video in wide-screen, regardless of the video signal input.

Original Displays a video according to the input video signal aspect ratio.

SMART ENERGY

SAVING

High Enables SMART ENERGY SAVING you can save energy with this energy-

high efficient function.

Low Enables SMART ENERGY SAVING you can save energy with this energy-

low efficient function.

Off Disables SMART ENERGY SAVING .

NOTE

y

The display may look the same for Wide, Original options at the recommended resolution (1920 x

1080).

y

The ratio is disabled in the interlaced signal.

* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.

y

The value of energy saving data may differ depending on panel and panel suppliers.

y

If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower

or higher depend on source.

NOTE

19

ENG

ENGLISH

Each option is described below.

-Picture

1

To view the

OSD menu

, press the

joystick button

at

the bottom of the monitor and then enter the

Menu

.

2

Go to

Picture

by moving the joystick.

3

Configure the options following the instructions that

appear in the bottom right corner.

4

To return to the upper menu or set other menu items,

move the joystick to ◄ or pressing ( / OK) it.

5

If you want to exit the OSD menu, move the joystick

to ◄ until you exit.

Do you want to Auto Confuguration?

NOTE

y

This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen,

please turn off this function.

y

This function can’t distinguish some colors in some images.

Menu > Picture Description

Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be ad-

justed.

Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want

screen more bright, you can control brightness in Menu OSD.

Reader 2 It is a mode that the screen is adjusted to the best for the cartoon. If you want screen

more bright, you can control brightness in Menu OSD.

Photo Optimizes the screen to view photos.

Cinema Optimizes the screen to improve the visual effects of a video.

Color

Weakness

This mode is for users who cannot distinguish between red and green. It enables us-

ers with color weakness to easily distinguish between the two colors.

Game Optimizes the screen for gameplay.

20

ENG

ENGLISH

Picture Adjust SUPER RESOLU-

TION+

High Optimized picture quality is displayed when a user wants

crystal clear images. It is effective forhigh quality video

or game.

Middle The optimized picture quality is displayed when a user

wants images between low and highmodes for comfort-

able viewing. It is effective for UCC or SD video.

Low The optimized picture quality is displayed when a user

wants smooth and natural images. It iseffective for slow-

moving pictures or still images.

Off Select this option for everyday viewing. SUPER RESO-

LUTION+ is turned off in this mode.

Sharpness Adjusts the sharpness of the screen.

Black Level Sets the offset level (for HDMI only).

y

Offset:

as a reference for a video signal, this is the darkest color

the monitor can display.

High Keeps the current contrast ratio of the screen.

Low Lowers the black levels and raises the white levels from

the current contrast ratio of the screen.

Response Time Sets a response time for displayed pictures based on the speed of the

screen. For a normal environment, it is recommended that you use

Normal. For a fast-moving picture, it is recommended that you use

High.

Setting to High may cause image sticking.

High Sets the response time to High.

Middle Sets the response time to Middle.

Low Sets the response time to Low.

Off Sets the response time to Off.

Overscan On To select the range of output image for DTV timing in

HDMI input, (only for HDMI input). Recommend

over-

scan

function to turn on when connect AV equipment.

Off

Disables the

Overscan

feature.

DFC On Adjusts the brightness automatically according to the

screen.

Off

Disables the

DFC

feature.

Black Stabilizer Black Stabilizer

: You can control the black contrast to have better visibility in dark

scenes.

Increasing the Black Stabilizer value brightens the low gray level

area on the screen. (You can easily distinguish objects on dark game

screens.)

Reducing the Black Stabilizer value darkens the low gray level area

and increases the dynamic contrast on the screen.

FreeSync Provides seamless and natural images by synchronizing the vertical

frequency of the input signal with that of the output signal.

NOTE

y

To use the FreeSync feature, a graphic card that supports

FreeSync is necessary.

y

Supported Interface: HDMI

y

For more information, refer to AMD website at http://www.amd.

com/FreeSync

On FreeSync function on.

Off FreeSync function off.

Page is loading ...

LG 24MP68VQ-P, 27MP68VQ-P Owner's manual

Related papers

Other documents