Mr Beams MB726 Operating instructions

Brand
Mr Beams
Model
MB726
Category
Flashlights
Type
Operating instructions

This manual is also suitable for

Mr Beams MB726 is a wireless motion sensor LED stick anywhere light. It is designed to provide light in areas where there is no existing light source, such as closets, pantries, under cabinets, and more. The light is activated by motion and turns off automatically after 30 seconds of inactivity. It is powered by 4 AA batteries and has a 10-lumen output, which is bright enough to cover up to 10 square feet. The light also features a light sensor that prevents it from activating in daylight, helping to conserve battery life.

Mr Beams MB726 is a wireless motion sensor LED stick anywhere light. It is designed to provide light in areas where there is no existing light source, such as closets, pantries, under cabinets, and more. The light is activated by motion and turns off automatically after 30 seconds of inactivity. It is powered by 4 AA batteries and has a 10-lumen output, which is bright enough to cover up to 10 square feet. The light also features a light sensor that prevents it from activating in daylight, helping to conserve battery life.

Stick Anywhere Light Features:
Motion/Light Sensor: Light instantly turns on when it
detects motion from up to 15 feet away. The light sensor
conserves battery life by preventing the light from
activating in daylight.
Auto Shut-off: Stick Anywhere Light shuts o
automatically after 30 seconds if no motion is detected.
Bright LED: 10 Lumens covers up to 10 sq ft.
32333 Aurora Rd. Suite 100 Solon, OH 44139
877.298.9082
Installation Instructions
Wireless Motion Sensor LED Stick Anywhere Light
MB720-723
• 1 Small Screwdriver
• 4 AA-Cell Alkaline Batteries (per light)
• Wireless LED Stick Anywhere Light
• 2 Screws & Double Sided Tape
• Mounting Bracket
LED Light
Motion & Light
Sensor
NOTE: Light sensor only allows light to activate in darkness. We recommend you test in a dark room or closet.
What you need to install:
Thank you for purchasing the Mr. Beams
TM
Stick Anywhere Light. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most
ecient and durable light sources available. We
are certain that your light will contribute to a safer
environment and provide light where you need it at
a very reasonable cost.
What is included per light:
www.mrbeams.com
1. Remove mounting bracket from back of light.
Remove battery door by turning 2 thumb screws
counter clockwise.
2. Insert 4 Fresh AA alkaline batteries.
5. Slide light onto mounting bracket
attached to wall.
4. Mount bracket to wall with double sided tape,
holding for 10 seconds or install with 2 small
screws. Note: This is a strong adhesive that
may cause damage to mounting surface. Please
consider your location before mounting.
3. Close battery door and replace
thumb screws.
Tips:
•
Use only new alkaline AA-Cell batteries with 1.5V rating.
•
Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
•
Install batteries with polarity in correct position.
•
Light may activate when batteries are inserted. Simply take light into a dark room. Allow
batteries to settle, then test activation.
•
If your light will not turn o, it means that it is time to replace the batteries.
* 1 year limited warranty. See enclosed card for details.
* Visit our website to view installation video.
Battery Caution:
1) Do not mix old and new batteries
2) Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium)
or (Nickel Metal Hydride) batteries
3) Do not dispose of batteries in re
4)Batteries should be recycled or disposed of as per state and local guidelines
  • Page 1 1

Mr Beams MB726 Operating instructions

Brand
Mr Beams
Model
MB726
Category
Flashlights
Type
Operating instructions
This manual is also suitable for

Mr Beams MB726 is a wireless motion sensor LED stick anywhere light. It is designed to provide light in areas where there is no existing light source, such as closets, pantries, under cabinets, and more. The light is activated by motion and turns off automatically after 30 seconds of inactivity. It is powered by 4 AA batteries and has a 10-lumen output, which is bright enough to cover up to 10 square feet. The light also features a light sensor that prevents it from activating in daylight, helping to conserve battery life.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents