Tiffen Quick Flip 120 User manual
- Category
- Flat panel accessories
- Type
- User manual
This manual is also suitable for
Stroboframe • Stroboframe
LIGHT, FAST,
LOW-PRICED!
Quick Flip 350
(35mm)
Quick Flip 120
(Medium Format)
Features:
• Pivoting flash arm keeps the flash
centered above the lens for both
horizontal and vertical compositions.
• Supplied with a machined,
positive-locking shoe mount that is
interchangeable with an optional
handle mount.
• Strong, lightweight, aluminum
construction with baked-on finish for
hard use and durability.
• High-density, neoprene foam side
grip for comfortable shooting or
carrying.
Quick Flip Specifications
Net Weight:
10 oz. (Quick Flip 350)
12 oz. (Quick Flip 120)
Bracket Height:
9.5"
Nominal Lens-to-Flash Distance:
12"
Includes:
Shoe mount,*
1/4"-20 camera mounting knob
Suggested Accessories:
Camera Auto
Quick Release, Cord Wrap
Catalog Number:
310-635
(Quick Flip 350)
Catalog Number:
310-666
(Quick Flip 120)
NOTE: Quick Flip models do not accept
Camera Anti-Twist Plates.
Features:
• Accepts all 35mm SLRs and
smaller 6 x 4.5mm cameras.
• Supplied with a machined,
positive-locking shoe mount and a
35mm Anti-Twist Plate (interchange-
able with other AT Plates).
• Strong, lightweight aluminum
construction with baked-on finish for
hard use and durability.
THE
ULTRA-COMPACT,
“UN-BRACKET!”
Our most economical
flash-rotating brackets.
The Quick Flip models offer high value, compact
size, light weight and fast handling. These are the
best-selling brackets on the market. Although lower
in price than our top-of-the-line brackets, they
share the same quality materials and construction.
The Quick Flip 350 accepts all 35mm cameras
except
those with large, accessory battery packs or
motor drives. The Quick Flip 120 has a large base
for medium format cameras and is configured for
both eye-level and waist-level viewing.
Quick Flip
Stroboflip
Stroboflip
The most compact
approach to flash
rotation.
The Stroboflip is an ultra-compact,
“gripless,” flash-rotating bracket. It
cradles the camera unobtrusively
while maintaining an over-the-lens
flash position. Its design lets you
hold the camera, rather than a grip,
and rotate the flash for horizontal or
vertical composition. An additional
advantage is that the stress and
weight of the flash unit is transferred
from the light-duty camera shoe to
the rugged Stroboframe mount. The
Stroboflip is made for shoe-type
flash units.
*Stroboflip and Quick Flip brackets are not compatible with Metz
quick release mounts. For Metz or other handle-type flash, use
Bracket Handle Mount (#300-HAN), sold separately.
Stroboflip Specifications
Net Weight:
9 oz.
Bracket Height:
5.5"
Nominal Lens-to-Flash Distance:
7.5"
Includes:
Shoe mount,* standard
35mm Camera Anti-Twist Plate
Suggested Accessories:
Camera Auto
Quick Release, for tripod mounting
Catalog Number:
300-100
Brackets for Cameras without
Built-in or Accessory Grips
Brackets for Cameras
without
Built-in or Accessory Grips
-
1
Tiffen Quick Flip 120 User manual
- Category
- Flat panel accessories
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
