20 21
BE 650R SBE 600R SBE 650R SB2-650
.........650 W ..............600 W ............. 650 W ................650 W
.........325 W ..............315 W ............. 325 W ................325 W
....0-3000 min
-1
.... 0-2900 min
-1
.... 0-3000 min
-1
2250/3000 min
-1
.......1500 min
-1
........1300 min
-1
....... 1300 min
-1
..850/1300 min
-1
..............- min
-1
......22500 min
-1
..... 22500 min
-1
.......22500 min
-1
...........25 Nm ..............23 Nm ............. 25 Nm ...............25 Nm
..............- ....................15 mm ............. 16 mm ...............16 mm
..............- ....................20 mm ............. 20 mm ...............20 mm
...........10 mm..............13 mm ............. 13 mm ...............13 mm
...........30 mm..............30 mm ............. 30 mm ...............30 mm
.....1,0-10 mm....... 1,5-13 mm ....... 1,5-13 mm ........ 1,5-13 mm
...1/2"x20 ............1/2"x20 ........... 1/2"x20 .............1/2"x20
...........43 mm..............43 mm ............. 43 mm ...............43 mm
..........1,7 kg ............... 1,8 kg .............. 1,8 kg ................1,8 kg
...........83 dB (A) .........83 dB (A)......... 83 dB (A) ...........83 dB (A)
...........94 dB (A) .........94 dB (A)......... 94 dB (A) ...........94 dB (A)
..............- ..................102 dB (A)....... 102 dB (A) .........102 dB (A)
..............- ..................113 dB (A)........113 dB (A) ......... 113 dB (A)
..............- .................20,5 m/s
2
......... 20,5 m/s
2
...........20,5 m/s
2
..............- ...................1,5 m/s
2
........... 1,5 m/s
2
.............1,5 m/s
2
..........3,5 m/s
2
............3,5 m/s
2
........... 3,5 m/s
2
.............3,5 m/s
2
..........1,5 m/s
2
............1,5 m/s
2
........... 1,5 m/s
2
.............1,5 m/s
2
.......< 2,5 m/s
2
.........< 2,5 m/s
2
........ < 2,5 m/s
2
..........< 2,5 m/s
2
..........1,5 m/s
2
............1,5 m/s
2
........... 1,5 m/s
2
.............1,5 m/s
2
ENGLISH
SPECIFIED CONDITIONS OF USE
BE650R: This power tool is intended to be used for drilling
SB2-650:
SBE600R, SBE650R: This power tool is intended to be
MAINS CONNECTION
possible to connect to sockets without an earthing contact
II
EC-DECLARATION OF CONFORMITY
in accordance with the regulations
Rainer Kumpf
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
the dust hold the machine with the chuck facing down
components need to be replaced which have not been
SYMBOLS
with household waste material! In
EC on waste electrical and electronic
equipment and its implementation in
that have reached the end of their life must
protection against electric shock does not
ENGLISH
Rated input
st
gear
Spindle thread
Chuck neck diameter
Sound pressure level
Sound power level
Sound pressure level
Sound power level
Wear ear protectors!
Vibration emission value a
h
Percussion drilling into concrete
Screwdriving
brochure
SAFETY INSTRUCTIONS
Loss of
Cutting
Fasteners contacting a "live" wire
air should be connected via a residual current device of
Sawdust and splinters must not be removed while the
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given