DFI EC500-SD User manual

DFI
Brand
DFI
Model
EC500-SD
Type
User manual

This manual is also suitable for

DFI EC500-SD Installation Guide

Below you will find brief product information for DFI EC500-SD Installation Guide to help you to give him an idea of the features and possible use cases.

The DFI EC500-SD is a high-performance, compact embedded system that delivers exceptional computing power and flexibility for a wide range of applications. Its small form factor and rugged construction make it ideal for space-constrained environments, while its powerful Intel processor and豊富な I/O options provide the versatility to handle demanding tasks.

The EC500-SD supports up to 32GB of DDR4 memory, ensuring smooth multitasking and fast data processing. It also features multiple storage options, including a 2.5" SATA drive bay, an mSATA slot, and a CFast card slot, providing ample space for data storage and retrieval.

DFI EC500-SD Installation Guide

Below you will find brief product information for DFI EC500-SD Installation Guide to help you to give him an idea of the features and possible use cases.

The DFI EC500-SD is a high-performance, compact embedded system that delivers exceptional computing power and flexibility for a wide range of applications. Its small form factor and rugged construction make it ideal for space-constrained environments, while its powerful Intel processor and豊富な I/O options provide the versatility to handle demanding tasks.

The EC500-SD supports up to 32GB of DDR4 memory, ensuring smooth multitasking and fast data processing. It also features multiple storage options, including a 2.5" SATA drive bay, an mSATA slot, and a CFast card slot, providing ample space for data storage and retrieval.

1
EC500-SD Installation Guide
Package Contents
DFI reserves the right to change the specications at any time prior to the product's release. For the latest revision
and details of the installation procedure, please refer to the user's manual.
www.d.com
•
1 EC500-SD system unit
• Mounting screws for SATA drive
•
Mounting screws for Mini PCIe module
Panel
Front View
Rear View
COM 2
Power Button
(1)
Reset Button
USB 2.0
COM 3
Status LED
HDD LED
COM 1
COM 4
Remote power
on/off
DC-in
USB 3.0
DVI-I
(DVI-D Signal)
CFast
LAN 1
LAN 2
VGA
Line-out
HDMI
Microphone
Notes:
1. Please gently press the power button to avoid possible damages.
2. The HDMI is a DP/HDMI combo port but can only provide HDMI connectivity (unless wired as a DP
port by request). Please plug in an HDMI cable with the right orientation and alignment to avoid
damage to the connector. You should feel resistance (due to a pin on the right) if the cable is not
inserted correctly. For detailed instructions, please see a video at https://youtu.be/SUj07rfN5l8.
Align this edge with the
left side of the connector
Angled-corner
(up)
Angled-corner
Aligning side
(left)
pin
2
Removing the Chassis Cover
1. Make sure the system and all other peripherals connected to it have been powered off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the left side, right side and bottom of the system are used to
secure the cover to the chassis. Remove these screws and put them in a safe place for later
use.
Mounting Screw
Mounting Screw
3
5. The SODIMM sockets, Mini PCIe slot and SATA drive bay are accessible after removing the chassis
cover.
4. Lift the cover upward to open the system.
SODIMM socket
Mini PCIe slot
SATA drive bay
4
Installing a SODIMM
1. The SODIMM sockets are located on the system board. Remove the SATA drive bay to
access the SODIMM sockets.
SODIMM socket
SATA drive bay
Mounting screw
5
2. Grasp the module by its edges and align the memory’s notch with the socket’s notch; then
insert the memory into the socket at an angle and push it down until you feel a click.
Notes:
1. The system supports dual-channel conguration. To enable dual-channel,
populate both SODIMM sockets.
2. The SODIMM sockets can only accept DDR4 memory modules. Please do not
install other types of memory modules.
SODIMM module
6
Installing a 2.5” SATA Drive
Mounting Screws
Mounting screw
SATA data and power cable
2. Place the SATA drive installed with the HDD bracket in the system. Align the mounting
holes on the HDD bracket with the mounting holes on the drive bay and use the provided
mounting screws to secure the drive in place.
Mounting Screws
Mounting hole
1. Before installing the SATA drive, connect the SATA data and power cable to the SATA data
connector of the SATA drive. Then install the SATA drive on the HDD bracket with the provided
mounting screws from the HDD drive bay kit.
7
3. Connect the other end of the SATA data and power cable to the SATA data and power
connectors on the system board respectively.
SATA data connector
SATA power connector
8
Installing a CFast Card
CFast slot cover
1.
Before installing a CFast card, take off the CFast card slot cover.
2. Gently insert the CFast card straight with the label on the CFast card facing up until you feel
it lock into place. Do not force the card into the slot if the card is not correctly inserted.
3. Close the CFast card cover. To eject the card, push the card inward to release the lock and
pull it out.
CFast installed
9
Installing a Mini PCIe or mSATA Card
The system board is equipped with 2 Mini PCIe slots: one full-size and one half-size slot. Here we
will demonstrate the installation of a full-size Mini PCIe card.
1. Grasp the Mini PCIe card by its edges and align the notch in the connector of the Mini PCIe
card with the notch in the connector on the system board.
2. Push the Mini PCIe card down and use the provided mounting screw to secure the card on
the system board.
Mounting screw
10
Board Layout and Jumper Settings
A45112945
www.d.com
Buzzer
USB 3-4
USB 3.0
USB 1-2
USB 3.0
Power LED
HDD LED
J22
JP2
JP3
J21
HDMI (default)/DP
DVI
System
Fan 2
1
Front
Panel
51
2
1
10
9
1
1
1
1
4
SATA Power
-
DC-in
LAN 2
LAN 1
PCIe x16 (PCIE1)
SPI Flash
BIOS
9
1
2 10
COM 4
VGA
1
6
(JP4)
Clear CMOS
Data (JP1)
Auto Power-on
Select (JP11)
1
6
(JP9) (JP16)
1
6
6
1
(JP8) (JP15)
1
6
6
1
(JP10)
1
2 10
COM 3
1
(JP6)
6
6
9
1
2 10
COM 2
9
1
2
(JP7) (JP14)
6
6
1
2
1
2 10
COM 1
9
1
2
16
LPC
1
2
14
4-pin power
1
1
2
3
4
PCIe x4 (PCIE2)
Power Button
Reset
DDR4_2 SODIMM
DDR4_1 SODIMM
1
(JP5)
6
6
1
1
1
6
6
2 2
2
6
1
4
2
25
26
Parallel
1
DIO Power
DIO
S/PDIF
Front Audio
2
51
1
10
9
ECX
+
SATA 3.0
USB 11-12
USB 2.0
USB 2.0 13-14
(JP13)
1
1
(JP12)
COM 2
1
SATA 0
SATA 1
1
Mini PCIe
mSATA
System
Fan 1
1
1
bettery
1
1
1
2 12
USB 2.0 9
COM 1
Clear CMOS Data JP1
Normal (default) 1-2 On
Clear CMOS Data 2-3 On
RS232/422/485 Select: COM 1 (JP5/JP12)
COM 2 (JP7/JP14)
RS232 (default) 1-3, 2-4 On
RS422 Full Duplex/RS485 3-5, 4-6 On
RS232/422/485 Select: COM 1 (JP6), COM 2 (JP13)
RS232 (default) 1-2 On
RS422 Full Duplex 3-4 On
RS485 5-6 On
RS232/Power Select: COM 1 (JP3), COM 2 (JP2)
RS232 (default) 1-3 (RI), 2-4 (DCD) On
RS232 with power 3-5 (+5V), 4-6 (+12V) On
Auto Power-on Select JP11
Power-on via Power Button (default) 1-2 On
Power-on via AC Power 2-3 On
Note:
1. When COM1 RS232/422/485 is selected, JP5 and JP12 must be set in
accordance to JP6.
2. When COM2 RS232/422/485 is selected, JP7 and JP14 must be set in
accordance to JP13.
3. When COM3 RS232/422/485 is selected, JP8 and JP15 must be set in
accordance to JP9.
4. When COM4 RS232/422/485 is selected, JP10 and JP16 must be set in
accordance to JP4.
RS232/422/485 Select: COM 3 (JP8/JP15)
COM 4 (JP10/JP16)
RS232 (default) 1-3, 2-4 On
RS422 Full Duplex/RS485 3-5, 4-6 On
RS232/422/485 Select: COM 3 (JP9), COM 4 (JP4)
RS232 (default) 1-2 On
RS422 Full Duplex 3-4 On
RS485 5-6 On
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

DFI EC500-SD User manual

DFI
Brand
DFI
Model
EC500-SD
Type
User manual
This manual is also suitable for

DFI EC500-SD Installation Guide

Below you will find brief product information for DFI EC500-SD Installation Guide to help you to give him an idea of the features and possible use cases.

The DFI EC500-SD is a high-performance, compact embedded system that delivers exceptional computing power and flexibility for a wide range of applications. Its small form factor and rugged construction make it ideal for space-constrained environments, while its powerful Intel processor and豊富な I/O options provide the versatility to handle demanding tasks.

The EC500-SD supports up to 32GB of DDR4 memory, ensuring smooth multitasking and fast data processing. It also features multiple storage options, including a 2.5" SATA drive bay, an mSATA slot, and a CFast card slot, providing ample space for data storage and retrieval.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents