Miller EDT-2400-2 comes with many advanced features you'll appreciate while in use. It powers weld guns for general purpose mild steel welding up to 1/2 in. (13 mm) thick. It features an Onan engine with a low oil pressure shutdown circuit. A 15-gallon fuel tank and a 25-foot cable permit long periods of operation without interruption. The unit is also equipped with a digital ammeter/voltmeter, hour meter, and running time meter to keep you well informed while welding or troubleshooting.
Miller EDT-2400-2 comes with many advanced features you'll appreciate while in use. It powers weld guns for general purpose mild steel welding up to 1/2 in. (13 mm) thick. It features an Onan engine with a low oil pressure shutdown circuit. A 15-gallon fuel tank and a 25-foot cable permit long periods of operation without interruption. The unit is also equipped with a digital ammeter/voltmeter, hour meter, and running time meter to keep you well informed while welding or troubleshooting.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Miller EDT-2400-2 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Miller EDT-2400-2 comes with many advanced features you'll appreciate while in use. It powers weld guns for general purpose mild steel welding up to 1/2 in. (13 mm) thick. It features an Onan engine with a low oil pressure shutdown circuit. A 15-gallon fuel tank and a 25-foot cable permit long periods of operation without interruption. The unit is also equipped with a digital ammeter/voltmeter, hour meter, and running time meter to keep you well informed while welding or troubleshooting.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller EDT-1000-2 Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Thule 231 User manual
-
Draw-Tite 63023 Installation guide
-
DK2 MMT5X7 Operating instructions
-
Reese Towpower 7062811 Operating instructions
-
-
-
-
-
-
Toro 31950 Installation Instructions Manual