Ricoh 180 User manual

180

OPERATING INSTRUCTIONS

COPY REFERENCE

Read this manual carefully before you use this product and keep it handy for future

reference.

For safety, please follow the instructions in this manual.

180 OPERATING INSTRUCTIONS

RICOH COMPANY, LTD.

15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo

Telephone: Tokyo 3479-3111

Overseas Affiliates

U.S.A.

RICOH CORPORATION

5 Dedrick Place

West Caldwell, New Jersey 07006

Phone: +1-973-882-2000

The Netherlands

RICOH EUROPE B.V.

Groenelaan 3, 1186 AA, Amstelveen

Phone: +31-(0)20-5474111

United Kingdom

RICOH UK LTD.

Ricoh House,

1 Plane Tree Crescent, Feltham,

Middlesex, TW13 7HG

Phone: +44-(0)181-261-4000

Germany

RICOH DEUTSCHLAND GmbH

Mergenthaler Allee 38-40,

65760 Eschborn

Phone: +49-(0)6196-9060

France

RICOH FRANCE S.A.

383, Avenue du Général de Gaulle

BP 307-92143 Clamart Cedex

Phone: +33-(0)1-40-94-38-38

Spain

RICOH ESPAÑA S.A.

Av.Litoral Mar, 12-14,

08005 Barcelona

Phone: +34-(0)93-295-7600

Italy

RICOH ITALIA SpA

Via della Metallurgia 12,

37139 Verona

Phone: +39-(0)45-8181500

Hong Kong

RICOH HONG KONG LTD.

23/F., China Overseas Building,

139, Hennessy Road,

Wan Chai, Hong Kong

Phone: +852-2862-2888

Singapore

RICOH ASIA PACIFIC PTE.LTD.

260 Orchard Road,

#15-01/02 The Heeren,

Singapore 238855

Phone: +65-830-5888

Printed in Japan

UE USA A250-7207

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related

to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety:

This machine is considered a CDRH class I laser device, safe for office/ EDP use. The machine con-

tains a 5-milliwat, 760 - 800 nanometer wavelength, GaAIAs laser diode. Direct (or indirect reflected)

eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock

mechanisms have been designed to prevent any possible laser beam exposure to the operator.

Laser Safety:

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit

in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite

equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser

chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis

and laser subsystems to the factory or service depot when replacement or the optical subsystem is re-

quired.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the Inch version.

For good copy quality, Ricoh recommends that you use genuine Ricoh toner.

Ricoh shall not be responsible for any damage or expense that might result from the use of parts other

than genuine Ricoh parts in your Ricoh office product.

Power Source:

120V, 60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see ⇒ P.87

“Power Connection”

.

USA (This information is for facsimile option users only.)

❖

❖❖

❖

FCC Requirements

1.

This equipment complies with Part 68 of the FCC rules. On the cover of this equipment is a label that

contains, among other information, the FCC registration number and ringer equivalence number

(REN) for this equipment. If requested, this information must be provided to the telephone company.

2. This equipment uses the following USOC jack: RJ11C

3. The REN is used to determine the quantity of devices which may be connected to the telephone line.

Excessive REN's on the telephone line may result in the devices not ringing in response to an incom-

ing call. In most, but not all areas, the sum of the REN's should not exceed five (5.0). Contact the

telephone company to determine the maximum REN for the calling area.

4. If this equipment causes harm to the telephone network, the telephone company will notify you in ad-

vance that temporary discontinuance of service may be required. If advance notice is not practical,

the telephone company will notify the customer as soon as possible. Also, you will be advised of your

right to file a complaint with the FCC if you believe it is necessary.

5.

The telephone company may make changes in its facilities, equipment, operations, or procedures that

could affect the operation of the equipment. If this happens, the telephone company will provide advance

notice in order for you to make necessary modifications in order to maintain uninterrupted service.

6. In the event of operation problems (document jam, copy jam, communication error indication), refer

to the solving problems section in this manual.

7.

If you cannot correct the problem, please contact the RICOH CORP. CUSTOMER SUPPORT DEPT. at 1-

800-FASTFIX for repair and warranty information. If it is causing harm to the telephone network, the tele-

phone company may request you to disconnect the equipment from the network until the problem is resolved.

8.

This equipment cannot be used on telephone company-provided coin service. Connection to Party

Line Service is subject to state tariffs.

❖

❖❖

❖

WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO

EMERGENCY NUMBERS:

1.

Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2.

Perform such activities in the off-peak hours, such as early morning hours or late evenings.

CANADA (This information is for facsimile option users only.)

The Industry Canada label identifies certified equipment. This certification means that the equipment meets

telecommunications network protective, operational, and safety requirements as prescribed in the appropri-

ate Terminal Equipment Technical Requirements document(s). The department does not guarantee the

equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of

the local telecommunications company. The equipment must also be installed using an acceptable method

of connection. The customer should be aware that compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any

repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecom-

munications company cause to request the user disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, tele-

phone lines, and internal metallic water pipe system, if present, are connected together. This precaution may

be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate

electric inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the max-

imum number of terminals allowed to be connected to a telephone interface. The termination on an interface

may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equiv-

alence Numbers of all the devices does not exceed 5.

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

a

aa

a means POWER ON.

c

cc

c means STAND BY.

i

Safety Information

When using your machine, the following safety precautions should be always

followed.

Safety During Operation

In this manual, the following important symbols are used:

Examples Of Indications

R

WARNING:

Ignoring this warning could cause serious injury or even death.

R

CAUTION:

Ignoring this caution could cause injury or damage to property.

Symbols

R

mean a situation that requires you take care.

Symbols

v

mean “Hot surface”.

Do NOT carry out the operation represented by this symbol

m

.

This example means “Do not take apart”.

Symbols

$

mean you MUST perform this operation.

This example means “You must remove the wall plug”.

ii

R

WARNING:

•

Only connect the machine to the power source described on

the inside front cover of this manual.

•

Avoid multi-wiring.

•

Do not damage, break or make any modifications to the pow-

er cord. Do not place heavy objects on it, pull it hard or bend

it more than necessary. These actions could cause an elec-

tric shock or fire.

•

Do not plug or unplug the power cord with your hands wet.

Otherwise, an electric shock might occur.

•

Make sure the wall outlet is near the machine and freely ac-

cessible so that in event of an emergency it can be un-

plugged easily.

•

Do not remove any covers or screws other than those spec-

ified in this manual. Some parts of the machine are at a high

voltage and could give you an electric shock. Also, if the ma-

chine has laser systems, direct (or indirect) reflected eye

contact with the laser beam may cause serious eye damage.

When the machine needs to be checked, adjusted, or re-

paired, contact your service representative.

•

Do not take apart or attempt any modifications to this ma-

chine. There is a risk of fire, electric shock, explosion or loss

of sight. If the machine has laser systems, there is a risk of

serious eye damage.

•

If the machine looks damaged or breaks down, smoke is

coming out, there is a strange smell or anything looks un-

usual, immediately turn off the operation and main power

switches then unplug the power cord from the wall. Do not

continue using the machine in this condition. Contact your

service representative.

•

If metal, liquid or foreign matter falls into the machine, turn

off the operation and main power switches, and unplug the

main power cord. Contact your service representative. Do

not keep using the machine with a fault or defect.

•

Do not put any metal objects or containers holding water

(e.g. vases, flowerpots, glasses) on the machine. If the con-

tents fall inside the machine, a fire or electric shock could

occur.

iii

•

Do not incinerate used toner or toner containers. Toner dust

might ignite when exposed to an open flame. Dispose of the

used toner containers according to local regulations for

plastics.

iv

R

CAUTION:

•

Keep the machine away from humidity and dust. A fire or an elec-

tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it top-

ples over, it could cause injury.

•

After you move the machine, fix it with the caster fixture. Other-

wise, the machine might move or come down to cause a personal

injury.

•

Before moving the machine, be sure to pull all four handles fully

out. Not doing this may result in an injury, such as getting your

fingers pinched. After moving the machine, return the four han-

dles to their original positions.

•

When the optional paper tray unit is installed, do not push the up-

per part of the main unit horizontally. If the paper tray unit be-

comes detached from the main unit, this could cause an injury.

•

When you move the machine, unplug the power cord from the

wall outlet to avoid fire or electric shock.

•

When the machine will not be used for a long time, unplug the

power cord.

•

When you pull out the plug from the socket, grip the plug to avoid

damaging the cord and causing fire or electric shock.

•

If you use the machine in a confined space, make sure there is a

continuous air turnover.

•

Do not reuse stapled paper. Do not use aluminum foil, carbon-

containing paper or other conductive paper. Otherwise, a fire

might occur.

•

When removing misfed paper, do not touch the fusing section be-

cause it could be very hot.

•

This machine has been tested for safety using this supplier's

parts and consumables. We recommend you only use these

specified supplies.

v

•

Do not eat or swallow toner.

•

Keep toner (used or unused) and toner containers out of reach of

children.

•

This equipment is only to be installed by a qualified service per-

sonnel.

•

Deliver to collection point for waste products. Do not be disposed

of via domestic refuse collection.

vi

ENERGY STAR Program

• Low-power Mode

This product automatically lowers its power consumption 15 minutes after the last

copying or printing. To exit Low-power mode, press the {

Energy Saver

} key.

For how to change the default interval before entering Low-power mode, see“Energy

Saver Timer”of the“System Settings”.

• Sleep Mode (Machines with fax or printer option.)

This product automatically lowers its power consumption 15 minutes after the last

copying or printing even further. Printing a received fax and printing are available in

this mode, but If you use the copier, press the operation switch.

For how to change the default interval before entering Sleep mode, see“Auto Off Tim-

er”of the “System Settings”.

• Auto Off Mode (Machines with copier feature only.)

To conserve energy, this copier automatically turns off 30 minutes after the last copying

job has been completed. To exit the Auto Off Mode, turn on the main switch. For how

to change the default interval before entering Auto Off mode, see“Auto Off Timer”of

the “System Settings”.

Specification

*1

Fax or Printer function in addition to standard Copier function.

*2

Only for Copier function.

*3

Based on Energy Star measurements.

As an ENERGY STAR Partner, we have determined

that this machine model meets the ENERGY STAR

Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for de-

veloping and introducing energy-efficient office equipment to deal with environmental issues,

such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall

place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equip-

ment by means of energy-saving features, such as Low-power mode

Copier only Fax or Printer is

installed.

Level 1 Level 2 Level 1 Level 2

Low-power Mode Power consumption about 60W about 30W about 74W about 50W

Default interval 15min.

Recovery time 10 sec. 20 sec. 10 sec. 20 sec.

Sleep Mode

*1

Power consumption

Not Available

less than 36W

*3

Default interval

30 min.

Auto Off Mode

*2

Power consumption

0W

*3

Not Available

Default interval 30 min.

vii

-Recycled paper

Please contact your sales or service representative for recommended recycled paper

types that may be used in this machine.

viii

How to Read this Manual

Symbols

In this manual, the following symbols are used:

R

WARNING:

This symbol indicates a potentially hazardous situation that might result in

death or serious injury when you misuse the machine without following the in-

structions under this symbol. Be sure to read the instructions, all of which are de-

scribed in the Safety Information section.

R

CAUTION:

This symbol indicates a potentially hazardous situation that might result in mi-

nor or moderate injury or property damage that does not involve personal injury

when you misuse the machine without following the instructions under this

symbol. Be sure to read the instructions, all of which are described in the Safety

Information section.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be

damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-

erating.

Note

This symbol indicates precautions for operation, or actions to take after misop-

eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,

or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[]

Keys that appear on the machine's panel display.

{}

Keys built into the machine's operation panel.

ix

What You Can Do with this Machine (Copy

Mode)

1 2

1

2

1 2

34

4

3

2

1

2 Originals → 1Copy

4 Originals → 1Copy

1 234

5678

2

1

8

7

8 Originals → 1Copy

Combine ⇒ Page 54

Sort ⇒ Page 37

12

Series Copy ⇒ Page 57

Reduce/Eularge ⇒ Page 51

Selecting Copy Paper ⇒ Page 33

*1 The optional paper tray unit is required

to use this function

Adjusting Copy Image Density

⇒ Page 31

Selecting Original Type Setting

⇒ Page 32

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

Sort

Auto Reducel/Enlarge

⇒ Page 34

Zoom ⇒ Page 53

Rotate Sort *1

Thys310e.eps

x

TABLE OF CONTENTS

Guide to Components............................................................................... 1

Options....................................................................................................... 3

Type 1........................................................................................................... 3

Operation Panel......................................................................................... 4

Panel Display............................................................................................. 6

Displays and Key Operations........................................................................ 6

1.Basics

Starting the Machine................................................................................. 9

When the Machine Only with Copy Feature.................................................. 9

When the Machine with Fax or Printer Option ............................................ 10

Changing Modes...................................................................................... 13

Originals................................................................................................... 14

Sizes and Weights of Recommended Originals.......................................... 14

Sizes Difficult to Detect............................................................................... 15

Original Sizes and Scanning Area/Missing Image Area.............................. 16

Copy Paper............................................................................................... 17

Recommended Paper Sizes and Types...................................................... 17

Envelopes ................................................................................................... 20

Non-recommended Paper........................................................................... 21

Paper Storage............................................................................................. 22

Toner Cartridge........................................................................................ 23

Handling Toner............................................................................................ 23

Toner Storage............................................................................................. 23

2.Copying

Basic Procedure...................................................................................... 25

Setting Originals...................................................................................... 27

Setting Originals on the Exposure Glass .................................................... 27

Setting Originals in the Document Feeder .................................................. 28

Setting Originals When Auto Pager Select Cannot Recoqnize the Size..... 29

Basic Functions....................................................................................... 31

Adjusting Copy Image Density.................................................................... 31

Selecting Original Type Setting................................................................... 32

Selecting Copy Paper ................................................................................. 33

Auto Reduce/Enlarge—Having the Machine Choose the Reproduction Ratios...

34

Sort ........................................................................................................... 37

Copying from the Bypass Tray .............................................................. 39

When Copying onto Envelopes................................................................... 43

xi

Program—Storing Your Copy Settings in Memory.............................. 47

Storing Your Settings.................................................................................. 47

Deleting a Program..................................................................................... 48

Recalling a Program.................................................................................... 48

Other Functions....................................................................................... 49

Energy Saver Mode—Saving Energy ......................................................... 49

Interrupt—Temporarily Stopping One Job to Copy Something Else........... 49

User Codes ..................................................................................................49

Auto Start—Entering Copy Job Settings During the Warm-up Period ........ 50

Original Tone............................................................................................... 50

Preset Reduce/Enlarge—Reducing and Enlarging Using Preset Ratios

.... 51

Zoom—Reducing and Enlarging in 1% Steps....................................... 53

Combine—Combining Originals into One Copy................................... 54

Series Copies—Making Two-sheets Copies from Book Originals ..... 57

Combination Chart.................................................................................. 59

3.What to do If Something Goes Wrong

If Your Machine does not Operate as You Want................................... 61

Message...................................................................................................... 61

Display ........................................................................................................ 62

If You Cannot Make Clear Copies.......................................................... 63

If You Cannot Make Copies as You Want.............................................. 65

B Loading Paper..................................................................................... 66

D Replacing the Toner Cartridge.......................................................... 67

x Clearing Misfeeds............................................................................... 70

Changing the Paper Size........................................................................ 72

4.User Tools (Copy Features)

Accessing the User Tools (Copy Features).......................................... 75

Exiting from User Tools............................................................................... 76

User Tools Menu (Copy Features)......................................................... 77

Settings You Can Change with the User Tools .................................... 78

1. General Features

1

/

4

............................................................................... 78

1. General Features

2

/

4

............................................................................... 79

1. General Features

3

/

4

............................................................................... 80

1. General Features

4

/

4

............................................................................... 81

2. Input/Output ............................................................................................ 82

xii

5.Remarks

Do's and Don'ts ....................................................................................... 85

Where to Put Your Machine.................................................................... 86

Machine Environment ................................................................................. 86

Power Connection....................................................................................... 87

Access to Machine...................................................................................... 88

Maintaining Your Machine...................................................................... 89

Cleaning the Exposure Glass...................................................................... 89

Cleaning the Platen Cover.......................................................................... 89

Cleaning the Document Feeder .................................................................. 89

6.Specification

Mainframe................................................................................................. 91

Document Feeder (Option)..................................................................... 94

500 – Sheet Tray Unit (Option)............................................................... 95

1000 – Sheet Tray Unit (Option)............................................................. 96

Internal Tray 2 (1bin tray) (Option)......................................................... 97

48MB Copier Memory Unit (Option)....................................................... 98

INDEX........................................................................................................ 99

xiii

1

Guide to Components

1. Platen cover (option) or Document

Feeder (ADF) (option)

Lower the platen cover over originals

placed on the exposure glass for copying.

If you have the document feeder, insert a

stack of originals here. They will be fed

automatically.

(The illustration shows the document

feeder.)

2. Exposure glass

Position originals here face down for

copying. See ⇒ P.14 “Originals”.

3. Internal tray

Copied paper is delivered here face

down.

4. Main power switch

The Machine with copy feature only:

Turn on this switch to activate the ma-

chine. Turn off this switch to shut off.

The Machine with fax or printer option:

Do not touch this switch. This switch is

used only by a service representative

when the optional fax unit is installed.

Note

❒ If the machine does not operate after

turning on the operation switch, check

if the main power switch is turned on.

If it is off, turn it on.

5. Operation switch

The Machine with fax or priner option:

Press this switch to turn the power on

(the On indicator lights up). To turn the

power off, press this switch again (the On

indicator goes off).

6. Operation panel

See ⇒ P.4 “Operation Panel”.

7. Internal tray 2 (option)

You can specify a tray to which docu-

ments are delivered for each mode (copy,

facsimile, and printer.)

8. Paper tray

(Tray 1)

Set paper here. See ⇒ P.66 “

B

Loading

Paper”.

9. Paper tray unit (Tray 2, 3) (option)

2

1. Bypass tray

Use to copy onto OHP transparencies, ad-

hesive labels, translucent paper, post cards,

envelopes and non-standard size paper.

See

⇒ P.39 “Copying from the Bypass Tray”.

2. Side cover

Open to remove jammed paper fed from

the paper tray, or to replace the toner car-

tridge.

3. Paper tray side cover

Open this cover to remove jammed paper

which fed from the paper tray unit.

4. Optional paper tray side cover

Open this cover to remove jammed paper

which fed from the optional paper tray unit.

1.

Ventilation hole

Prevents overheating. Do not obstruct

the ventilation hole by placing or leaning

an object near it. If the machine over-

heats, a fault might occur.

3

Options

1. Internal tray 2 (1 bin tray)

If you selected this as the output tray, copied

paper is delivered here face down. See

“14. Output Tray Prio.” in the “System Set-

tings”.

2. Platen cover

Lower this cover over originals for copying.

3. Document feeder (ADF)

Insert a stack of originals here.

They will be fed automatically.

4. Paper tray unit

Consists of two paper trays.

5. Paper tray unit

Consist of one paper tray.

Other options:

• 48MB copier memory unit

Page is loading ...

Ricoh 180 User manual

This manual is also suitable for

Ricoh 180 User manual

Related papers

Other documents