2. FLEXCO
  3. Alligator Rivet Installation Tool

FLEXCO Alligator Rivet Installation Tool Operating instructions

  • I have reviewed the provided assembly instructions for the FLEXCO Rivet Installation Tool ART-7. The document clearly outlines the steps for assembling the tool, including placing the clamp bar and springs, aligning the cam levers, and setting them to engage the clamp bar. I am ready to answer your questions about the assembly process.
  • What is the first step in assembling the tool?
    What is the second step in assembling the tool?
    What should be done after screwing cam levers into base?
Alligator® Rivet Installation Tool
ART-7 Assembly Instructions
X4656
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A.
Tel: 1-630-971-0150 • Fax: 1-630-971-1180 • E-mail: info@flexco.com
Visit www.flexco.com for other Flexco locations and products.
©2017 Flexible Steel Lacing Company. Alligator® is a registered trademark. 06-12-17. For Reorder: X4656
1. Place clamp bar and springs over tapped
holes on base.
2. Align cam levers with threaded holes.
3. Screw cam levers into base. 4. Completed assembly.
5. Set cam levers to engage clamp bar. 6. Finished.
/