Symmons SLW-0600-12-1.0 Installation guide

Symmons
Brand
Symmons
Model
SLW-0600-12-1.0
Category
Faucets
Type
Installation guide

This manual is also suitable for

Symmons SLW-0600-12-1.0-TRM is a two-handle widespread lavatory faucet trim, part of the SLW-0600 series. It features a polished chrome finish, quarter-turn ceramic cartridges, 1/2" IPS inlet connections, and a 1.0 gpm aerator for water conservation. The faucet is designed for widespread valve body assembly with 8"-16" mount and includes a metal drain assembly. It is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, NSF/ANSI 372, and WaterSense standards. The package includes two handles, an escutcheon, and a lift rod.

Symmons SLW-0600-12-1.0-TRM is a two-handle widespread lavatory faucet trim, part of the SLW-0600 series. It features a polished chrome finish, quarter-turn ceramic cartridges, 1/2" IPS inlet connections, and a 1.0 gpm aerator for water conservation. The faucet is designed for widespread valve body assembly with 8"-16" mount and includes a metal drain assembly. It is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, NSF/ANSI 372, and WaterSense standards. The package includes two handles, an escutcheon, and a lift rod.

DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SLW-0600-12-1.0 Series (CDSLW0600-12-1.0)
Two Handle Widespread Lavatory Faucet
Installation Guide
SLW-0600-12-1.0
Two Handle Widespread Lavatory Faucet
SLW-0600-12-1.0-TRM
Two Handle Widespread Lavatory Faucet Trim
SLW-0600-BODY
Widespread Valve Body Assembly
Two Handle Widespread Lavatory Faucet (with widespread
valve body assembly) featuring 8"-16" mount shall include
quarter turn ceramic cartridges, 1/2" IPS inlet connections,
metal drain assembly and 1.0 gpm (3.8 L/min) aerator.
Faucet shall be made from metal construction, plated in
standard polished chrome nish.
Dimensions
Measurements
A (2x) 2-9/16", 65 mm
B Ø 2-1/4", 57 mm
C 4", 102 mm
D 8", 203 mm
E Ø 2-1/4", 57 mm
F 1-5/16", 33 mm
G 7-1/4", 184 mm
H 5", 127 mm
IDeck Thickness Ref.
Max. 1-13/16", 46 mm
J(2x) Hole Size
Ø 1-1/4", 32 mm
KHole Size
Ø 1-1/4", 32 mm
L Min. 2-1/4", 57 mm
M 3/4", 19 mm
NHole Size
Ø 3/4", 19 mm
Note: Dimensions subject to change without notice.
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372
-WaterSense 1.0 gpm (3.8 L/min)
for SLW-0600-12-1.0 only
CC E
E
DD
G
GH
H
L
L
M
M
N
N
A
AFF
I
I
KKJJ
B
B
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2541 REV C ■ 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A
G
Hot Plug Button
Cold Plug Button LN-03313-KIT
B Lift Rod P-108CLB
C
D
(2x) Set Screw
(2x) Handle LN-03311-KIT
E Escutcheon LN-03312
F Spout LN-03314
HAerator (1.0)
Aerator (1.5)
FLR-130-1.0-KIT
FLR-130-1.5-KIT
I
J
Spout Base
O-ring LN-03315
K
L
Mounting Washer
Mounting Nut RL-187
M Hot Cartridge KN-114
N Cold Cartridge KN-113
O Metal Drain RL-154LR
HOT
Water Supply
COLD
Water Supply
AB
C
D
EFG
HI
J
K
L
M
N
O
Notes:
1) Apply a bead of silicone around the perimeter
of trim installed ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (3 mm)
Phillips Head
Screwdriver
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Page 1 1
  • Page 2 2

Symmons SLW-0600-12-1.0 Installation guide

Symmons
Brand
Symmons
Model
SLW-0600-12-1.0
Category
Faucets
Type
Installation guide
This manual is also suitable for

Symmons SLW-0600-12-1.0-TRM is a two-handle widespread lavatory faucet trim, part of the SLW-0600 series. It features a polished chrome finish, quarter-turn ceramic cartridges, 1/2" IPS inlet connections, and a 1.0 gpm aerator for water conservation. The faucet is designed for widespread valve body assembly with 8"-16" mount and includes a metal drain assembly. It is compliant with ASME A112.18.1/CSA B125.1, NSF/ANSI 61.9, NSF/ANSI 372, and WaterSense standards. The package includes two handles, an escutcheon, and a lift rod.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers