Symmons SLW-8802-1.5, SLW-8802-1.0 Installation guide

  • Hello! I'm your chat assistant, and I've reviewed the installation guide for the Symmons' DS Creations Lavatory Faucets, specifically models SLW-8802-1.5 and SLW-4512-WINDS-1.5. This document provides detailed specifications, installation dimensions and replacement parts information for those two handle widespread lavatory faucets. I am ready to answer your questions about the product and its installation.
  • What is the mounting configuration range for this faucet?
    What type of cartridges does this faucet use?
    What is the flow rate of the aerator?
DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SLW-8802-1.5 (SLW-4512-WINDS-1.5)
Two Handle Widespread Lavatory Faucet
Installation Guide
SLW-8802-1.5
Two Handle Widespread Lavatory Faucet
Two Handle Widespread Lavatory Faucet featuring 8"-16"
mounting conguration shall include ceramic cartridges,
3/8" copper supplies, 1/2" IPS inlet connections, metal drain
assembly and 1.5 gpm (5.7 L/min) aerator. Faucet shall be
made from metal construction, plated in standard polished
chrome nish.
Dimensions
Measurements
A 8", 203 mm
B (2x) 3-3/8", 86 mm
CDeck Thickness Ref.
Max. 1-3/8", 35 mm
D Hole Size
Max. Ø 1-3/4", 44 mm
E Hole Size
Max. Ø 1-1/2", 38 mm
F 5-1/2", 140 mm
G 1-1/4", 32 mm
H 1-1/2", 38 mm
I 1/2-14 NPSM
J 3/16", 5 mm
Note: Dimensions subject to change without notice.
BB
CC
DD EE
FF
II
AA
HH
GG
JJ JJ
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-2555 REV A 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A Lift Rod RL-230
B
C
Handle
Set Screw RL-008
B
D
F
G
Handle
Escutcheon
Flange
Cartridge Adapter
WSF-WCW-KIT
D
F
G
Escutcheon
Flange
Cartridge Adapter
RL-012
E1.0 Aerator
1.5 Aerator
FLR-130-1.0-KIT
FLR-130-1.5-KIT
H
I
J
Washer
Mounting Nut
Mounting Screws
RL-187
K
L
Cold Cartridge
Hot Cartridge
KN-113
KN-114
M Metal Drain RL-154LR
H
I
K
L
J
J
A
M
E
B
C
D
F
G
Notes:
1) Apply a bead of silicone around the perimeter of trim installed
ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2.5 mm)
Phillips Head
Screwdriver
Plumber Putty
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/