Symmons 0600-05-HS-2.0-TRM Installation guide

Category
Car kits
Type
Installation guide

Symmons 0600-05-HS-2.0-TRM is a shower and hand shower trim that offers various features for a comfortable and efficient showering experience. It includes a metal lever handle for precise temperature and water flow adjustment, and a separate dual outlet diverter trim that allows you to switch between the showerhead and hand shower effortlessly. The in-line vacuum breaker prevents backflow and ensures the safety of your water supply.

Symmons 0600-05-HS-2.0-TRM is a shower and hand shower trim that offers various features for a comfortable and efficient showering experience. It includes a metal lever handle for precise temperature and water flow adjustment, and a separate dual outlet diverter trim that allows you to switch between the showerhead and hand shower effortlessly. The in-line vacuum breaker prevents backflow and ensures the safety of your water supply.

DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
0600-05-HS-2.0-TRM (CD0600-05-HS-2.0-TRM)
Shower/Hand Shower Trim
Installation Guide
0600-05-HS-2.0-TRM
Shower/Hand Shower Trim
Shower/Hand Shower Trim shall include metal lever handle,
separate dual outlet diverter trim, in-line vacuum breaker,
60" exible metal hose, 3 mode showerhead, 1 mode hand
shower and 2.0 gpm (7.6 L/min) ow restrictors.
Shower/Hand Shower trim shall be made from metal
construction, plated in standard polished chrome nish.
Dimensions
Measurements
A Ø 2-1/2", 64 mm
B 6-5/8", 168 mm
C Ø 5", 127 mm
D Ø 2", 51 mm
E Ref. 77", 1956 mm
F 3-1/2", 89 mm
G Ø 6-1/4", 159 mm
H 3", 76 mm
I Ref. 10", 254 mm
J Ref. 32", 813 mm
K 2-9/16", 65 mm
L
(Rough in)
2-3/8" ± 1/2", 60 mm ± 13 mm
BB
AA
F
F
D
D
C
C
I
I
LL
KK
J
J
G
G
HH
E
E
FLOORFLOOR
Notes:
1) All dimensions measured from nominal rough-in (see L as reference).
2) Dimensions subject to change without notice.
Compliance
-ASME A112.18.1/CSA B125.1
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-2462 REV B 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A
B
Flange
Shower Arm 300S
C Showerhead 352SH-2.0
D Hand Shower 432W-2.0
E
F
Handle
Set Screw RTS-060
G Dome Cover RTS-036
H Diverter Escutcheon RTS-070
I Shower Escutcheon RTS-071
J
K
Cradle
Set Screw RTS-059
L
MWall Ell Assembly RTS-072
N
O
Vacuum Breaker
60" Metal Hose EF-104
A
C
D
J
E
F
B
K
M
L
H
G
E
GI
F
HOT
Water Supply
O
N
COLD
Water Supply
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed ush to the nished wall (less mounting plates and
brackets). Leave opening on bottom of escutcheon for weep hole.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable
Wrench
Allen Wrench:
Handle (2 mm)
Cradle (2 mm)
Drill
Phillips Head
Screwdriver
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Page 1 1
  • Page 2 2

Symmons 0600-05-HS-2.0-TRM Installation guide

Category
Car kits
Type
Installation guide

Symmons 0600-05-HS-2.0-TRM is a shower and hand shower trim that offers various features for a comfortable and efficient showering experience. It includes a metal lever handle for precise temperature and water flow adjustment, and a separate dual outlet diverter trim that allows you to switch between the showerhead and hand shower effortlessly. The in-line vacuum breaker prevents backflow and ensures the safety of your water supply.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI