Ketcham Cabinets Ketcham-ELL-2030 Installation guide

Category
Motorcycle Accessories
Type
Installation guide

This manual is also suitable for

Ketcham Cabinets Ketcham-ELL-2030P is an LED mirror with a range of features that can enhance your bathroom experience. It has a sleek and modern design with a 20-inch width and 30-inch height, making it suitable for most bathrooms.

The mirror features adjustable Kelvin temperature, allowing you to customize the lighting to your preference. You can choose from warm white (3000K), natural white (4500K), or cool white (6000K). It also has adjustable brightness, so you can set the perfect level of illumination for your needs.

Ketcham Cabinets Ketcham-ELL-2030P is an LED mirror with a range of features that can enhance your bathroom experience. It has a sleek and modern design with a 20-inch width and 30-inch height, making it suitable for most bathrooms.

The mirror features adjustable Kelvin temperature, allowing you to customize the lighting to your preference. You can choose from warm white (3000K), natural white (4500K), or cool white (6000K). It also has adjustable brightness, so you can set the perfect level of illumination for your needs.

IMPORTANT SAFETY INSTRUCTIONS
ELLIPSE SERIES, ELLIPSE+ SERIES
LED MIRROR
INSTALLATION GUIDE
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
When using an electrical product, basic precautions should
always be folllowed, including the following:
!
!
!
!
WARNING
WARNING
WARNING
WARNING
To reduce the risk of burns, fire, electric shock, injury or death,
use this product only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer. Never drop or insert any object into any opening.
Do not use outdoors.
Installation should be done by a licensed professional.
Failure to follow proper installation will void warranty.
Risk of electric shock. Connect this product to a properly
grounded circuit only. See grounding instructions below.
An electrical option mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in
bathrooms and all other locations required by the
National Electric Code.
Grounding Instructions:
This product must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead
on the product.
A - Mirrors Width | B - Mirror’s Height
C - Distance from Mirror Frame to Electrical Box
X - Distance Between Vertical Mounting Holes | Y - Distance Between Horizontal Mounting Holes
A<W>
<H>
B
Y
X
<Depth>
20”x 30” 24”x 36”
A2024
B30” 36”
C15 ” 18 ”
X9 7/16” 11
Y13 3/8” 20 1/16”
SIZE GUIDE:
C
1¾”
X
Y
Ground
B
A
Wiring from light fitting
Natural wire White(N)
Green/yellow
Live Wire
Ground(green/yellow)
Black(L)
1
DETAIL 1
1. GAP 0.2”
WALL
**Electrical connection not included. You may need additional materials to
complete your installation.
FINAL ASSEMBLY
Use and Maintenance:
CLEANING A STANDARD MIRROR SURFACE:
- Mirror and mirror body are constructed of mirrored glass and aluminum. Use a damp cloth to clean your mirror.
Do not use any abrasive material as it may damage the surface and finish of the mirror.
- A mild detergent may be used to clean the surfaces of the mirror.
- When cleaning, spray the cloth, not the mirror or surrounding surfaces.
DOES YOUR MIRROR HAVE VISIBLE TOUCH SENSORS
ON THE FACE OF THE MIRROR?
* NOTE: IF YOUR MIRROR DOES NOT HAVE VISIBLE TOUCH SENSORS ON THE FACE OF
THE MIRROR, IT MUST BE HARDWIRED TO A LIGHT SWITCH.
** these models do not have color changing, dimming, or defogging capabilities.
Adjusting Kelvin Temperature:
To change the Kelvin temperature, simply double tap the sensor.
Kelvin temperature options are: 3000K, 4500K, and 6000K.
Adjusting the Brightness:
To adjust the brightness, hold down the sensor and it will begin to fade down.
To increase the brightness, tap and hold the sensor again.
Operating the Defogger:
To turn on the defogger, tap the sensor. When you hear a click, the defogger is now turned on. The
defogger will take approximately 5 minutes to heat up. To turn off the defogger, tap the touch sensor again, and
you will hear defogger unit click off.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ketcham Cabinets Ketcham-ELL-2030 Installation guide

Category
Motorcycle Accessories
Type
Installation guide
This manual is also suitable for

Ketcham Cabinets Ketcham-ELL-2030P is an LED mirror with a range of features that can enhance your bathroom experience. It has a sleek and modern design with a 20-inch width and 30-inch height, making it suitable for most bathrooms.

The mirror features adjustable Kelvin temperature, allowing you to customize the lighting to your preference. You can choose from warm white (3000K), natural white (4500K), or cool white (6000K). It also has adjustable brightness, so you can set the perfect level of illumination for your needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI