CLS Florence GIII Bracket Owner's manual

Brand
CLS
Model
Florence GIII Bracket
Type
Owner's manual
www.cls-led.com www.cls-led.com
Ceiling 360ºWallFloor270º 150 cm 50.000 h45 gr 40º15º 1 x Cree IP40 2700K
CRI>90
Max.
700mA
Max.
3 Watt
1-10 V
dimmable
Phase
dimmable
DMX
dimmable
DRIVER
EXTERNAL
DRIVER
EXCLUDED
3000K
CRI>90
4000K
CRI>90
2
CLS FLORENCE GIII BRACKETCLS FLORENCE GIII BRACKET
Manual V1.3 - november 2020
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
Installation 4
Accessories 4
Always switch o mains power
of the driver before connecting
or maintaining any fixtures!
Qualified
technician
Ambiance
Max. 40º
Do not stare
into the LED
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Make sure all
connectors are
connected
properly
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Don’t modify
or install
genuine parts
on this product
15º
Wiring diagram Non dim drivers 5
Wiring diagram Mains dim drivers 6
Wiring diagram 1-10V dim drivers 8
Wiring diagram Casambu Bluetooth 9
Wiring diagram DALI dim drivers 10
Wiring diagram LDC-41 dimmer 11
List of symbols 12
Manual
CONTENT
SAFETY INFORMATION
www.cls-led.com www.cls-led.com
3 4
44,2 mm
Ø32 mm 32 mm
23,20 mm
36,5 mm
28,3 mm
Tools
SPECIFICATIONS
LED: 1 x Cree
Available colours: CRI>90: 2700K, 3000K & 4000K
Lenses: 40º or 15º
Power supply: Max. 700mA
Power consumption: Max. 3 Watt
Housing: Aluminum brushed black coated
Weight: 45 gr
IP value: IP40
Cable length: 150 centimeter
Swivel angle: 270º vertical, 360º horizontal
Measurements: ø mm (øxh)
Ambient temperature: -10º C till +40º C
TECHNICAL
Ø3 mm
INSTALLATION
ACCESSORIES
113002 CLS LDC-41 GIII DMX LED dimmer 4 channels 0.35-1A per channel
87129900 CLS SmartConnect 2-fold junction box & shortcircuit connect.
87129901 CLS SmartConnect 2-fold junction Box with 5 metre cable
87129905 CLS SmartConnect 6-fold junctionbox & shortcircuit connect.
87129915 CLS SmartConnect short circuit plugs (10pcs)
872010 CLS Dimmer electr. 1-10V for MT35/MTD44 LED driver
872019 CLS Dimmer Jung phase cut max. 270VA 230-240VAC
874001 CLS ND 001 non dim, 100 - 240 V, 700mA driver
874004 CLS ND 004 non dim, 198 - 264 V, 250-1050mA driver
874003 CLS ND UNI non dim driver, 220 - 240 V, 300-1050mA driver
874101 CLS MD 001 mains dim. 198-264V, 700mA driver
874104 CLS MD 004 mains dim. 198-264V, 250-700mA driver
874201 CLS VD 001, 1-10V dim, 99-264 V, 350-900mA driver
874204 CLS VD 004, 1-10V dim, 99-264 V, 350-900mA driver
874208 CLS VD 008, 1-10V dim, 99-264 V, 250-700mA driver
874301 CLS DD 001, DALI dim, 99-264 V, 250-700mA driver
874304 CLS DD 004, DALI dim, 99-264 V, 350-700mA driver
875014 CLS CD UNI, Casambi Bluetooth control, 230V, 350-700mA driver
911367 CLS LDC SmartConnect block LDC to SmartConnect system
2020 CLS-LED BV. All rights reserved. In-
formation subject to change without notice,
CLS-LED BV and all aliated companies
disclaim liability for injury, damage direct or
indirect loss, consequential or economic loss
or any other loss occasioned by the use of,
inability to use or reliance on the information
contained in this manual. No part of this
manual may be reproduced, in any form or
by any means, without permission in writing
from CLS-LED BV. Other legal information
can be found in our General conditions,
found on the back of your CLS-LED BV
invoice, inside the CLS catalogue or on our
website www.cls-led.com/General-Terms.pdf
ACCESSORIES
www.cls-led.com www.cls-led.com
65
WIRING DIAGRAM NON DIM DRIVERS
CLS ND 001, non dimmable, 700mA driver
19 x 115 x 34 mm (hxwxd)
120 ~180 cm cable
* 150 cm cable
CLS SmartConnect
6-fold junction box
# 87129905
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket total cable length is max. 10 m
120 ~ 180 cm cable
115 mm
34 mm
Always use 1 - 5 pcs of Florence GIII Bracket on the CLS ND 001
CLS Florence GIII Bracket
# 87130003
CLS ND 004
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket total cable length is max. 10 m
CLS ND 004, non dimmable, 250-1050mA driver
30 x 129,5 x 42 mm (hxwxd)
Always use 4 - 13 pcs of Florence GIII Bracket on the CLS ND 004
120 ~180 cm cable
120 ~ 180 cm cable
129,5 mm
42 mm
CLS Florence GIII Bracket
# 87130003
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Florence Bracket total cable length is max. 10 m
CLS ND UNI, non dimmable, 300-1050mA driver
22 x 146 x 43 mm (hxwxd)
Always use 3- 13 pcs of Florence Bracket on the CLS ND UNI
120 ~180 cm cable
120 ~ 180 cm cable
146 mm
43 mm
CLS Florence Bracket
# 871300XX
CLS ND UNI
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
7 8
WIRING DIAGRAM 1-10V DIM DRIVERS
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
CLS VD 001, 1-10V dimmable, 350-900mA driver
22 x 100 x 52 mm (hxwxd)
CLS VD 001
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
CLS SmartConnect
6-fold junction box
# 87129905
Max. 12 pieces of VD 001 on
1 CLS Dimmer electr. 1-10V
Always use 1 - 8 pcs of Florence GIII Bracket on the CLS VD 001
52 mm
100 mm
CLS Florence GIII Bracket
# 87130003
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
CLS VD 004, 1-10V dimmable, 350-900mA driver
21 x 103 x 67 mm (hxwxd)
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
CLS SmartConnect
6-fold junction box
# 87129905
Max. 12 pieces of VD 004 on
1 CLS Dimmer electr. 1-10V
Always use 1 - 14 pcs of Florence GIII Bracket on the CLS VD 004
CLS VD 004
67 mm
103 mm
CLS Florence GIII Bracket
# 87130003
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket total cable length is max. 10 m
CLS MD 001, mains dimmable, 700mA driver
21 x 94 x 38 mm (hxwxd)
Always use 3 - 4 pcs of Florence GIII Bracket on the CLS MD 001
CLS SmartConnect
6-fold junction box
# 87129905
CLS MD 001
120 ~180 cm cable
94 mm
38 mm
CLS Dimmer Jung phase cut
max. 270VA 230-240VAC
# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 001 on
1 CLS dimmer Jung phase-cut
CLS Florence GIII Bracket
# 87130003
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket total cable length is max. 10 m
CLS MD 004, mains dimmable, 250-700mA driver
34 x 166 x 46 mm (hxwxd)
Always use 1 - 14 pcs of Florence GIII Bracket n the CLS MD 004 120 ~180 cm cable
CLS Dimmer Jung phase cut
max. 270VA 230-240VAC
# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 004 on
1 CLS dimmer Jung phase-cut
CLS MD 004
46 mm
166 mm
CLS Florence GIII Bracket
# 87130003
WIRING DIAGRAM MAINS DIM DRIVERS
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
9 10
CLS VD 008, 1-10V dimmable, 250-700mA driver
22 x 124 x 79 mm (hxwxd)
120 ~180 cm cable
Max. 12 pieces of VD 008 on
1 CLS Dimmer electr. 1-10V
Always use 1 - 21 pcs of Florence GIII Bracket on the CLS VD 008
CLS VD 008
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
* 150 cm cable
CLS SmartConnect
6-fold junction box
# 87129905
79 mm
124 mm
CLS Florence GIII Bracket
# 87130003
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Florence Bracket total cable length is max. 10 m
CLS CD UNI, Casambi Bluetooth, 350-700mA driver
30 x 108 x 44 mm (hxwxd)
Always use 4 - 15 pcs of Florence Bracket on the CLS CD UNI
120 ~180 cm cable
120 ~ 180 cm cable
108 mm
44 mm
CLS Florence Bracket
# 871300XX
CLS CD UNI
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM CASAMBI BLUETOOTH CONTROL
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
CLS DD 001, DALI dimmable, 250-700mA driver
22 x 100 x 52 mm (hxwxd)
CLS DD 001
120 ~180 cm cable
120 ~180 cm cable
* 150 cm cable
Always use 1 - 8 pcs of Florence GIII Bracket on the CLS DD 001
DA1DA2
Controller
Supporting DALI CLS Florence GIII Bracket
# 87130003
CLS SmartConnect
6-fold junction box
# 87129905
52 mm
100 mm
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
CLS DD 004, DALI dimmable, 350-700mA driver
21 x 103 x 67 mm (hxwxd)
120 ~180 cm cable
* 100 cm cable
CLS SmartConnect
6-fold junction box
# 87129905
DA1DA2
Controller
Supporting DALI
CLS DD 004
Always use 1 - 14 pcs of Florence GIII Bracket on the CLS DD 004
67 mm
103 mm
CLS Florence GIII Bracket
# 87130003
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM DALI DIM DRIVERS
www.cls-led.com www.cls-led.com
11 12
WIRING DIAGRAM LDC-41 DRIVER
CLS LDC-41 GIII DMX LED
dimmer 4 channels
# 113002
25 mm (w)
Installation wire 2 x 0.5 mm2
Driver till last Florence GIII Bracket
total cable length is max. 10 m
Make sure the LDC-41 is set to 700mA!
CLS Florence GIII Bracket
# 87130003
CLS SmartConnect
6-fold junction box
# 87129905
24 / 48 VDC
24 VDC powersupply: Min. 2 and max. 6 pcs on each channel
48 VDC powersupply: Min. 7 and max. 12 pcs on each channel
Also select the correct BT powersupply according to the consumed power
CLS LDC
SmartConnect Block
# 911367
CH1 = Channel 1
CH2 = Channel 2
CH3 = Channel 3
CH4 = Channel 4
CH1
CH2 CH3
CH4
Always switch off mains power of the driver before connecting any fixtures!
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Performance Zoom
Adjustable beam angle
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol or Wireless DMX
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat, fish and
vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
PWM dimming
Traditional PWM dimming, DMX analog
or DMX Hybrid dim
CLS
DYNAMIC
COLOUR
COB
LIST OF SYMBOLS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

CLS Florence GIII Bracket Owner's manual

Brand
CLS
Model
Florence GIII Bracket
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents