2. Amana Tool
  3. AMS-257

Amana Tool AMS-257 Operating instructions

  • Hello! I've reviewed the product detail for the Amana Tool CNC router bit set, specifically models RC-1148, RCK-56, RC-45711, 46200-K, 46102-K, 46202-K, 46170-K and 46282-K. This set includes a variety of bits designed for different applications such as carving, v-grooving and plunging. Each bit has its own running parameters for optimal performance. I am ready to answer your questions about the bits or their specifications.
  • What is the recommended RPM for these bits?
    What is the maximum depth per pass for the 30° ‘V’ Carving bit?
    What shank size are the bits?
1/4"
SHANK
INDUSTRIAL
8-Pc CNC Set No.
AMS-257
8-Pc CNC Set No.
AMS-257
Must Read Before Use
Safety Guidelines for Router Bits
www.amanatool.com/safety
Many More CNC Router Bit Sets Available!
www.amanatool.com
Questions?
Call the Technical Hotline
(800) 445-0077
+1 (631) 752-1300
Many More CNC Router Bit Sets Available!
Must Read Before Use
Safety Guidelines for Router Bits
www.amanatool.com/safety
www.amanatool.com
Questions?
Call the Technical Hotline
(800) 445-0077
+1 (631) 752-1300
CNC General Purpose Set
INDUSTRIAL
CNC General Purpose Set
CNC GENERAL PURPOSE SET
1/4" SHANK
Designed Specically for a Wide Variety of Applications
Congratulations on the purchase of your new Amana Tool® CNC set, a
premier general purpose CNC router bit set.
Free Vectric Master .tool File Database
can be found on www.amanatool.com/vectric
*RPM: Revolutions Per Minute **IPM: Inches Per Minute
Vectric File Warning:
The Vectric .tool le should only be used in conjunction
with the Amana Tool® item number specied.
Using this le with other brands is dangerous
to the operator and CNC machine.
Diameter: 1-1/16"
Cutting Height: 59/64"
Shank: 1/4"
Overall Length: 2-25/64"
Flutes: 1 Flute
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 40" IPM**
Ramp Down Rate: 20" IPM**
Max Depth Per Pass: 1/4"
#RC-1148
60° INSERT CARBIDE V-GROOVE
#RCK-56
GENERAL PURPOSE INSERT CARBIDE KNIFE
Tip Width: 0.005"
Cutting Height: 0.440"
Shank: 1/4"
Overall Length: 2-1/4"
Flutes: 1 Flute
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 40" IPM**
Ramp Down Rate: 40" IPM**
Max Depth Per Pass: 1/8"
#45771-K
30° ‘V’ CARVING/ENGRAVING
Solid Carbide, for Fine-Line Engraving
Wood Solid Surface
Veneered
Plywood
LaminateMelamine Xanita®
Lightboard™
X-Board™
X-Board™ Plus
Composite Dibond®
Plastic/Acrylic
& Plexiglas®
Fiberglass Sign Foam, Sign
Board & HDU
MDF/HDF Graphite Phenolic
Composite
Material Key Chart:
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
46282-K
Ø1/16", Spiral
Tapered Ball
Nose 1/32" R
45771-K
0.005" Tip Width
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46102-K
Ø1/4"
Spiral Plunge
Up-Cut
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression
Spiral
RC-45711
Ø11/16"
Insert Carbide
45 V-Groove
RC-2265
Ø1-1/2"
Heavy-Duty
Spoilboard
3-Wing
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46448-K
Ø1/16"
Spiral Plunge
Down-Cut
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
45771-K
0.005" Tip Width
30° Engraving
51404-K
Ø1/2"
Plastic Cutting
Spiral ‘0’ Flute
Up-Cut
51402-Z
Ø1/4"
Aluminum Cutting
Spiral ‘0’ Flute
Up-Cut
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
Diameter: 11/16"
Cutting Height: 21/64"
Shank: 1/4"
Overall Length: 1-61/64"
Flutes: 1 Flute
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 40" IPM**
Ramp Down Rate: 20" IPM**
Max Depth Per Pass: 1/4"
#RC-45711
90° IN-TECH V-GROOVE
#AMA-12
SOLID CARBIDE INSERT KNIFE Diameter: 1/4"
Cutting Height: 3/4"
Shank: 1/4"
Overall Length: 2-1/2"
Flutes: 2 Flute Down-Cut
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 100" IPM**
Ramp Down Rate: 50" IPM**
Max Depth Per Pass: 1 x Diameter
Diameter: 1/4"
Cutting Height: 3/4"
Shank: 1/4"
Overall Length: 2-1/2"
Flutes: 2 Flute Up-Cut
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 100" IPM**
Ramp Down Rate: 50" IPM**
Max Depth Per Pass: 1 x Diameter
#46202-K
SPIRAL FLUTE PLUNGE
Solid Carbide, Down-Cut
#46102-K
SPIRAL FLUTE PLUNGE
Solid Carbide, Up-Cut
Diameter: 1/8"
Cutting Height: 1/2"
Shank: 1/4"
Overall Length: 2"
Flutes: 2 Flute Down-Cut
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 40" IPM**
Ramp Down Rate: 20" IPM**
Max Depth Per Pass: 1 x Diameter
#46200-K
SPIRAL FLUTE PLUNGE
Solid Carbide, Down-Cut
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
46282-K
Ø1/16", Spiral
Tapered Ball
Nose 1/32" R
45771-K
0.005" Tip Width
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46102-K
Ø1/4"
Spiral Plunge
Up-Cut
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression
Spiral
RC-45711
Ø11/16"
Insert Carbide
45 V-Groove
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
46282-K
Ø1/16", Spiral
Tapered Ball
Nose 1/32" R
45771-K
0.005" Tip Width
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46102-K
Ø1/4"
Spiral Plunge
Up-Cut
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression
Spiral
RC-45711
Ø11/16"
Insert Carbide
45 V-Groove
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
46282-K
Ø1/16", Spiral
Tapered Ball
Nose 1/32" R
45771-K
0.005" Tip Width
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46102-K
Ø1/4"
Spiral Plunge
Up-Cut
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression
Spiral
RC-45711
Ø11/16"
Insert Carbide
45 V-Groove
RC-1148
Ø1-1/16"
Insert V-Groove
60° Angle
46282-K
Ø1/16", Spiral
Tapered Ball
Nose 1/32" R
45771-K
0.005" Tip Width
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46102-K
Ø1/4"
Spiral Plunge
Up-Cut
46200-K
Ø1/8"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression
Spiral
RC-45711
Ø11/16"
Insert Carbide
45 V-Groove
INDUSTRIAL
8-Pc CNC Set No.
AMS-257
8-Pc CNC Set No.
AMS-257
Must Read Before Use
Safety Guidelines for Router Bits
www.amanatool.com/safety
Many More CNC Router Bit Sets Available!
www.amanatool.com
Questions?
Call the Technical Hotline
(800) 445-0077
+1 (631) 752-1300
Many More CNC Router Bit Sets Available!
Must Read Before Use
Safety Guidelines for Router Bits
www.amanatool.com/safety
www.amanatool.com
Questions?
Call the Technical Hotline
(800) 445-0077
+1 (631) 752-1300
CNC General Purpose Set
INDUSTRIAL
CNC General Purpose Set
Diameter: 1/4"
Cutting Height: 7/8"
Up-Cut Height: 7mm
Shank: 1/4"
Overall Length: 2-1/2"
Flutes: 2 Flute
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 100" IPM**
Ramp Down Rate: 50" IPM**
Max Depth Per Pass: 5/16"
#46170-K
COMPRESSION SPIRAL
Solid Carbide
45771-K
Tip Width 0.005"
30° Engraving
46202-K
Ø1/4"
Spiral Plunge
Down-Cut
46170-K
Ø1/4"
Compression Spiral
Angle: 5.4°
Radius: 1/32"
Diameter: 1/16"
Cutting Height: 1"
Shank: 1/4"
Overall Length: 3"
Flutes: 4 Flute Up-Cut
CNC Running Parameters:
RPM: 18,000*
Feed Rate: 30" IPM**
Ramp Down Rate: 8" IPM**
Max Depth Per Pass: 1 x Diameter
#46282-K
TAPERED BALL NOSE
Solid Carbide Spiral, Up-Cut
/