2. Computers & electronics
  3. Projectors
  4. Projector mounts
  5. Panasonic
  6. ET-PKE2000
ET-PKE2000

Panasonic ET-PKE2000, ET-PKE2000 - Mounting Kit For Projector User manual

  • Hello! I am an AI chatbot trained to assist you with the Panasonic ET-PKE2000 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
191
Ø49
Ø43
(1-15/16˝)
70 PT-AE2000
Attachement
plate
369– 449
(14-13/32˝–17-9/16˝)
Adjustable in
20 mm (25/32˝) steps
65 (2-9/16˝)
(2-3/4˝)
(1-11/16˝)
(7-1/16˝)
SPEC FILE
ET-PKE2000
Ceiling mount bracket for high ceilings
As of September 2007 < 1 >
Specifications Vertical correction angle: +5°, -20°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W x H x D): 468 x 418 – 498 x 195 mm
(18-7/16˝ x 16-16/32˝–19-19/32˝ x 7-11/16˝)
Weight: 3.0 kg (6.6 lbs)
Illustration shows the ET-PKE2000 attached
to the PT-AE2000.
Attachment plate
Ø9.5 (3/8˝)
Ø8.5
(11/32˝)
20 (2-9/16˝)
150 (5-29/32˝)
160 (6-5/16˝)
140 (5-1/2˝)
110 (4-11/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 x 12) . . . . 19
Washer-fitted screws (M4 x 10) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.Description
Caution:
• All mounting work must be done by a qualified technician.
•Ensure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions carefully before starting the mounting procedure.
• When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
• Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
/