George Kovacs P1153-609-L User manual

Type
User manual
1
2
3
4
L
L
N
N
Page 1/1
P1153-609-L
ASSEMBLING THE FIXTURE (Fig.1)
Fig.1
Fig.2
Fig.2
C
U S
1
Shut off power at the fuse box or circuit breaker.
If
necessary, remove the old fixture including the
mounting hardware.
2 Carefully remove the fixture from the carton and
check that all parts are included as show in Figure
1.
3
CONNECTING THE WIRES (Fig. 2)
4 Connect the electrical wire as shown in figure 2,
making sure that all wire connectors are secured. If
your
outlet has a ground wire (green or bare
copper),
connect the ground wire from the hanger
ball and
mounting plate to it. Otherwise connect
fixture ground
wire (C) directly to the crossbar using
the green screw (D)provided. Tuck the wire
connections neatly into the
ceiling junction box as
you hold the canopy towards the
ceiling.
FINISHING THE INSTALLATION (Fig.1)
5 Fix the canopy(F) into the mounting plate (A) with
screw(G).
Your installation is now complete. Return power to the
junction box and test the fixture.
CAUTION/ATTENTION: When handling the fixture,
do
not apply pressure to the LEDs. Hold the fixture
by the
frame only.
G
F
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
FIXTURE
WIRES
BLACKOR
SMOOTH
FIXTURE
WIRES
WHITEOR
RIBBED
FIXTURE
WIRES
GREENOR
BARE
COPPER
(GROUND)
HOUSE
WIRES
BLACK
(HOT)
HOUSE
WIRES
WHITE
(NEUTRAL)
HOUSE
WIRES
GREENOR
BARECOPPER
(GROUND)
Attach the Mounting Plate (A) to the Junction box
using screws ( ,size: / *L11/8''). B M1 8
The side of the mounting back plate marked “GND
must face out.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
AVERTISSEMENT!COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEU
READ AND SAVE THESE INSTRUCTIONS
For LED Pendant
INSTALLATION INSTRUCTIONS FOR P1153- 609-L
IMPORTANT: Fixture should be installed by a qualied
electrician to ensure proper wiring and installation.
Dimmable with ELV and/or LED compatible wall
dimmer switches.
  • Page 1 1

George Kovacs P1153-609-L User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI