Additional Features:
High quality durable construction
Designed in the UK
1 year gaurantee
Specifications:
Frequency Range:
Power Supply:
Power Consumption:
Fully Screened:
Outputs:
Gain (each output):
Noise:
Designed for continuous indoor use.
Application and user instructions inside
Safety Warnings:
> Always follow manufacturer’s
operating and safety instructions
when using tools and/or equipment
> To avoid injury always route cables
carefully
> Before making any connections
switch electricity off at the mains
> If in doubt consult a qualified
electrician or professional aerial
installer
Connect the coaxial lead from your
TV or Radio and aerial down lead
(single or diplexed) into the front
section of the booster.
To split the signal from the output a
TV/Radio Diplexer and Flylead will
be required (not supplied).
Plug the booster into a convenient
3 pin mains socket and switch on.
Installation Instructions:
TV and FM/DAB radio.
A diplexer can be used on input and outputs.
Typical Application Example:
1
2
3
Wideband for UHF TV and
VHF radio (40–790MHz)
Mains (230-240V)
Low (<5w)
Yes
4
12.5dB
3.5dB
This Booster will supply up to 4 TV’s.
To other outputs
PSB4INS Iss 1
FRONT PANEL - SHOWN IN PACKAGING
FOLD LINES
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Alcatel-Lucent 9500 User manual
-
MK K1534 Installation guide
-
-
TERK Technologies TV44 User manual
-
-
Airmar External Diplexer Convert from Dual to Single Transmission Line Owner's manual
-
DKTCOMEGA 52260 Datasheet
-
Audiovox TV55 User manual
-
Musical Fidelity A5 User manual
-
Fracarro 283938 Datasheet
