Taco 0011-CF User guide

Plant I.D. 001-4215 EFFECTIVE: October 23, 2013

102-496

TACO, INC., 1160 Cranston Street, Cranston, RI 02920 Telephone: (401) 942-8000 FAX: (401) 942-2360

TACO (Canada), Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8

Telephone: 905/564-9422 FAX: 905/564-9436

Visit our web site at: http://www.taco-hvac.com

Printed in USA

TACO, Inc.

Follow these instructions when installing Taco’s optional 554-1 Wireless

Remote Kit.

WIRELESS REMOTE KIT OPTION – MODEL #554-1

Wiring the Receiver:

The optional remote receiver kit is the white rectangular box with the three protruding

wires (black, red, and green). Batteries are not required. Wire the black and green receiv-

er wires directly to the corresponding wires on the controller by twisting each same col-

ored wire together with the gray wire nuts provided. Wire the red wire on the receiver to

the white wire from the controller by twisting them together with the gray wire nut pro-

vided. The receiver should be mounted toward the front of the cabinet (range of the

transmitter is about 70’). If the transmitter will activate the pump from a short distance,

but not from further away, the receiver may need to be relocated for better reception.

Strapping the receiver to the front of the drain trap facing outward will optimize reception.

Addendum to Instruction Sheets

102-153 and 102-140

This manual is also suitable for

Download PDF