Taco Comfort Solutions VR1816HY2FC2A00 is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is suitable for use with water or a maximum of 50% water/glycol solution and is not suitable for chilled water or open loop potable water systems. The VR1816HY2FC2A00 has a maximum shut-off head of 18 feet, a maximum flow of 16 gpm, and a maximum operating pressure of 125 psi. It is equipped with a cast iron casing and should be used for closed loop systems only.
Taco Comfort Solutions VR1816HY2FC2A00 is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is suitable for use with water or a maximum of 50% water/glycol solution and is not suitable for chilled water or open loop potable water systems. The VR1816HY2FC2A00 has a maximum shut-off head of 18 feet, a maximum flow of 16 gpm, and a maximum operating pressure of 125 psi. It is equipped with a cast iron casing and should be used for closed loop systems only.
Taco Comfort Solutions VR1816HY2FC2A00 is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It is suitable for use with water or a maximum of 50% water/glycol solution and is not suitable for chilled water or open loop potable water systems. The VR1816HY2FC2A00 has a maximum shut-off head of 18 feet, a maximum flow of 16 gpm, and a maximum operating pressure of 125 psi. It is equipped with a cast iron casing and should be used for closed loop systems only.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI