2. ITW Redhead
  3. 3143407

ITW Redhead 3143407, 3139407, 3141407, 3161407 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the ITW Redhead 3143407 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
92
Call our toll free number 800-899-7890 or visit our web site for the most
current product and technical information at www.ramset-redhead.com
1. With sleeve off and drill bit exposed, drill pilot
hole 1/4" deeper than recommended anchor
embedment. Snap proper anchor socket onto
end of sleeve. Slide drive sleeve over drill bit.
2. Insert head of Tapcon anchor into hex or
phillips socket.
INSTALLATION STEPS
3. Put point of anchor into pre-drilled hole and
drive until anchor is fully seated.
/