-
MPN(s): LBSQUAT
SKU(s): 400484
UPC(s): 719318384558
2
3
4
Below is a parts diagram pertaining to all the parts and hardware involved in the
installation of the oil bushings, followed by step-by-step instructions.
5
1. Insert an OIL BUSHING (F)
into each side of one of the
arms of the MAIN FRAME (A).
2. After completing Step 1, the
arm of your MAIN FRAME (A)
should look like the image to
the right.
6
3. As seen in the illustration above, insert the HANDLEBAR (B) into the OIL
BUSHING (F) that is facing the inside of the MAIN FRAME (A).
4. Once the end of the HANDLEBAR (B) is through both OIL BUSHINGS (F),
secure an M16 WASHER (6) and an M16 NUT (7) to the end of the
HANDLEBAR’S (B) rod, respectively. (DO NOT OVERTIGHTEN!)
5. Repeat Steps 1–4 for the other arm of the MAIN FRAME (A).
/
