Brandt DVH1538J Owner's manual

Brand: Brandt

Model: DVH1538J

Category: Dishwashers

Type: Owner's manual

This manual is also suitable for

DVH15423J

EN INSTRUCTION MANUAL

Reviewing the section on troubleshooting Tips will help

you solve some common problems by yourself.

Dea r Cu stomer,

Please carefully read th is manu al before using the

dishwasher, it will help you use and mainta in the

dishwasher pro perly.

Pass i t on to any subseq uen t owner of the appliance.

This manual contains se ctions on safety Instructi ons,

Operating Instructio ns, Inst allat ion I nstructions and

Troubleshooting Tip s, etc.

The man ufacture r, following a pol icy of constant

dev elopment and updating of the product, may

make modificatio ns witho ut giving prior notice.

If lost or out-of-date, you can receive a new user

manual from the manufacturer or responsible

vendor.

Keep this manual for future reference.

If you cannot solve the problems by yourself,

please ask for help from a pr ofessional technician.

Dishwasher Features.................................... ........6

A Water Softener............ ......... ......... ................. .7、

................................... ... ........... . 12

Recommendations for loading and unl oading

the dishwasher

Filter System................ ......... ........................ ......16

Caring for the Dishwasher........... .......... ............. .17.

B Loading the S alt into the Soft ener......................8、

C Filling the Rinse Aid Dispenser........ ................. 8、

D Function of Detergent ........... ........................ ...9、

Loading the upper ....................................13Basket

Loading the Lower ....................................13Basket

Wash Cycle Table................................................14

Turning on the Appliance.....................................14

... ......... ..............15

Changing the Program mid-cyc le

At the end o f th e Wash Cycle................................15

Before calling for serv ice.. ......................... ..........25.

Error codes.................................... ...................26.

Technical information.............................. ..... .....27..

Control Panel........................................................6

Inst allation preparation. ......... ........................ .....18

........19Aesthetic panel's dimensions and installation

Tension adjustment of the door spring ......... ..........21

Connection of drain hoses..................... ......... .....21

Dishwasher installat ion steps......................... .....22

About Electricity Con nec ting............. ...................23

Cold Water Conne ction. ................... .............. .....24

This appliance is intended to be used in household

and similar applications such as:

-staff kitchen areas in shops, offices and other

working environments;

-farm houses;

-by clients in hotels, motels and other residential type

environments;

-bed and breakfast type environments.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision

or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be done by children

without supervision.(For EN60335-1)

Packaging material could be dangerous for children!

This appliance is for indoor household use only.

To protect against the risk of electrical shock,

do not immerse the unit, cord or plug in water or

other liquid.

Please unplug before cleaning and performing

maintenance on the appliance.

Use a soft cloth moistened with mild soap, and then

use a dry cloth to wipe it again.

When using your dishwasher,

follow the precautions listed below:

This appliance must be earthed. In the event of a

malfunction or breakdown, earthing will reduce the

risk of an electric shock by providing a path of least

resistance of electric current. This appliance is

equipped with an earthing conductor plug.

The plug must be plugged into an appropriate outlet

that is installed and earthed in accordance with all

local codes and ordinances.

Improper connection of the equipment-earthing

conductor can result in the risk of an electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

Do not modify the plug provided with the appliance;

If it does not fit the outlet.

Have a proper outlet installed by a qualified electrician.

Do not abuse, sit on, or stand on the door or dish

rack of the dishwasher.

Do not operate your dishwasher unless all enclosure

panels are properly in place.

Open the door very carefully if the dishwasher is

operating, there is a risk of water squirting out.

Do not place any heavy objects on or stand on the door

when it is open. The appliance could tip forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to

damage the door seal;

2) Warning: Knives and other utensils with sharp points

must be loaded in the basket with their points

down or placed in a horizontal position.

Check that the detergent powder is empty after

completion of the wash cycle.

Do not wash plastic items unless they are marked

dishwasher safe or the equivalent.

For check the

manufacturer's recommendations.

Use only detergent and rinse agents recommended for

use in an automatic dishwasher.

The door should not be left open, since this could increase

the risk of tripping.

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard.

During installation, the power supply must not be

excessively or dangerously bent or flattened.

Do not tamper with controls.

The maximum number of place settings to be washed

is 15.

The maximum permissible inlet water pressure is 1MPa.

The minimum permissible inlet water pressure is 0.04MPa.

facing

“ ”

unmarked plastic items not so marked,

Never use soap, laundry detergent, or hand washing

detergent in your dishwasher.

The appliance needs to be connected to the main water

valve using new hose sets. Old sets should not be reused.

This appliance's packaging materials are recyclable.

Dispose of the packaging into a suitable waste

collection container to recycle it.

It is prohibited to dispose of this appliance as

household waste.

Correct Disposal of this product: this symbol on the

product or in its packing indicates that this product

may not be treated as household waste. Instead,

it should be taken to the appropriate waste collection

point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human health,

which could otherwise be caused by the inappropriate

waste handling of this product.

For more detailed information about the recycling of

this product, please contact your local council your

household waste disposal service, or the shop where

you purchased the product.

For disposing of package and the appliance please

go to a recycling centre. Therefore cut off the power

supply cable and make the door closing device

unusable.

Cardboard packaging is manufactured from recycled

paper and should be disposed in the waste paper

collection for recycling.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which could

otherwise be caused by inappropriate waste handling

of this product.

For more detailed information about recycling of this

product, please contact your local city office and your

household waste disposal service.

DISPOSAL: Do not dispose this product as unsorted

municipal waste. Collection of such waste separately

for special treatment is necessary.

For detailed operating method read the co rresponding content on the instruction manual.

For each wash cycle.

For programs with pre-wash,please put the detergent anywhere inside the

inner tank except in compartment A

(Follow the user instructions!)

Electric indicator on control panel (if provided).

Check the rinse aid level

(On models with water softener system only.)

Electric indicator on control panel (if provided).

If there is no salt warning light in the control panel

(for some models), you can estimate when to fill the salt into

the softener by the number of cycles the dishwasher has run.

Check the regeneration

salt level

Load the baskets

Select a programme

Turn on the water tap ,close the door . The machine will start working at once.

Running the dishwasher

Switch off the appliance

Turn off the water tap,

unload the baskets

Fill the detergent dispenser

Warning: wait a few minutes (about 15 minutes ) befo re unlo ading the dishwas her to avoid

han dling the dis hes an d uten sils while they are still h ot and more s uscep tible t o brea k.

The dishe s will also dry bett er. Firs t start unloading the lower basket.

Changing the programme

Adding forgotte n dishes

in the dishwash er.

To load the baskets, ref er to th e sect ion entitled .“ ”Preparing and Lo ading Dishes

Touch any progra mme b utton until th e selected p rogram me li ghts up.

( See the section entitled Operation instr uction )“ ”

If the appliance is switched

off during a wash cycle.

Open the do or carefully.

Look o ut for hot ste am

when openin g the door!

If the appliance is switched off during a wash cycle, when switched

on again, please re-select the washing cycle and operate the dishwasher

according to the original Power-on state ).

Switch on the appliance Open the door, the On/Off button to switch on the appliance .

touch

1.Open the door a little to stop the dishwasher.

2.After the spray arms stop working, you can open the door completely.

3.Add the forgotten dishes.

4.Close the door, the dishwasher will start running again .

1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent

may have already been released and the water already drained. If this is the case, the detergent

dispenser must be refilled.

2.Open the door.

3. for more than 3 seconds to cancel the running programme.

4. Select a new programme.

5. Restart the dishwasher.

Touch any programme button

When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.

Turn off the appliance using the On/Off Button.

Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.

before using it for the first tim e.

To get the best perform ance from your dishwasher, read all operating ins tructions

7.Program functions, on ly one function can b e se lected in

a cycle:

3.Screen- Show the program time and d elay time;

Eg: program time

Delay time

2. Program Buttons-touch to select the Prog ram,

corresp onding indicator will be lightened;

Auto

Intensive

Normal

ECO

Glass

90M in

Rapid

4.Status Indic ators :

Faucet is not open

Rinse detergent need to be refilled

Salt need to be refilled

1. Power B utton- to uch on and off. 5.Delay Buttons:

6.Alt Function Buttons and indicators:

Increase

Upper basket

Reduce

Lower basket

Front view

Ba ck View

Extra Dryi ng: Final rinse temperature increases and

an extend ed drying phase is added to impro ve d rying

efficiency. It involves a slight energy consumption in

cr ease.

Strong wash: An increa sed temperature during the main

wash and a ad ditional risin g are added to impro ve cleaning

efficiency. This function will involve an energy and water

consumpt ion increase.

Lower basket

Salt container

Dispenser

Cup shelf

Spray arms

Filter assembly

Inlet pipe connector

Drain pipe

Upper basket

Cutlery ra ck

Top spray arm

Inner pipe

Adjuster

Express, to reduce .program duration

The water softener must be set manually, using the water hard ness dial.

The water softener is des igned to remove minerals and salts from the water, which would have

a detrimental or adverse effect on the operation of the app liance.

The more minerals there are, the harder your wate r is

The softener sho uld be adjusted according to the hard ness of the water in your area. Your local Water Authority

can advise you on the hardness o f the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of sa lt consumed bas ed on the ha rdness of

the water used. This is intended to op timise and customise the level o f salt consumption.

1. Open the door ,Switch on the appliance;

2. Touch the program button for more than 5 seconds to star t the water softener

setting mode within 60seconds after the appliance was switched on(Salt and

Rinse aid war ning lights will be on periodically );

3. the program button to select the proper set according to ,

4. To end the setting mode, either touch the On/Off button or wait 5 sec onds

Touch

th e setting will change in the following sequence: H1->H2->H3->H4->H5->H6->H1;

Rapid

seeting mode is on

the hardness of you r local waterRapid

WATER SOFTENER

The hardness of the wa ter varie s from place to plac e. If har d water is used in the dishwasher, deposits will

form on the dish es and utensils.

The applian ce i s equipped with a sp ecial softener that uses a salt container specifically des igned to eliminate

lime and minerals from the water.

Contact your local water board for information on the hardness of your water supply.

Please follo w the steps below for adjustment in salt consumption.

If your model does not have any water softener, you may skip this section.

The manufactory setting: H3 (EN 50242)

Before using you r dishwasher for the first time :

A. Set the water softener

B. Add 1.5Kg dishwasher salt and then full fill the salt container with w ater

C. Fill the rinse aid dispenser

D. Fill in detergent

Clark: British degree

fH: French degree

dH: German degree

dH=1.25 Clarke=1.78 fH=0.178mmol/l

mmol/l

0~90~5 0~0.94 0

10-20

6-11

1.0-2.0 9

21-3012-17 2.1 -3.0 12

0~6

7-14

15-21

Clarke

WATER HARDNESS

Sel ector Position

Salt con sumption

(gram/cycle)

18-22 31-40 22-28 3.1-4.0

41-6023-34 4.1 -6.0 30

29-42

35-55 61-98 43-69 6.1-9.8

1. The salt container must only be refilled when the salt warning light in the control panel comes on.

Depending on how well the salt dissolve s, the salt warning light may still be on even though the

salt container is filled.

If there is no salt w arning light in the control panel (for some Mode ls),you can estim ate when to fill

the salt into the softener by the cycles that the dishwasher has run.

I f sal t has spilled , run a s oak or quick program to remove it.

Always use the salt intended for dishwasher use.

The salt contain er is located beneath the lower basket and should be filled as explained

in the foll owing:

Warning!

Only use salt spe cif ically desi gne d for dishwashers use! Every other type of

salt not speci fically desig ned for dishwasher use, e specially table salt, wil l

damage the w ater softener. In case of damages caused by the use of unsuitable

salt the ma nufacturer does not give any wa rranty nor is liable for any damages caused.

Only fil l with salt before running a cycl e.

This will prevent any grains of salt or salty wate r, which ma y have been spilled,

remaining on the bottom of the machi ne for any p eriod of time, which may cause

corrosion.

Rinse Aid Dispenser

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a s pot and streak fre e drying.

Warning!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances

(e.g. Dishwasher cleaning agent, liquid detergent). Th is would damage the app lian ce.

with water,It is normal f or a small amount of wa te r to

come out of the salt container.

Fill the salt cont aine r to its maximu m li mit

A After the lower basket has been removed, unscrew and remove the cap from the salt container.

B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of di shwasher salt.

D After fil ling the container ,

screw back the cap tightly.

E The sal t warning ligh t will stop being after the sa lt contain er has be en fi ll ed with sa lt .

F Imm ediately after f illing the salt into the salt container, a washing program should be started

program Other wise the filt er system, pump or ot her important parts of t he machine may be damaged

by salty water. This is out of warranty.

(We suggest to use a short

The rinse aid is released during the final rinse to prevent wa ter from formi ng droplets on your di shes, which can

leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is

designed to use liquid ri nse aids. Th e rinse aid d ispenser is located inside, on the door and next to the detergent

dispenser.

To fill the dispe nser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely

black. The volume of the rinse aid container is about 110ml.

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

Carefully po ur in the r inse-aid in to its di spen ser, whil st avoiding it to overflow.

Replace the cap by inserting it aligned with "open" arrow and turning it to the cl osed (right) arrow.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has six or four settings. Always st art with the dispenser

set on "4". If spot s and poor drying are a problem, increase the amount of rinse

aid dispensed by removing the dispenser lid and rotating the d ial to "5". If the

dishes still are no t drying properly o r show spots, adjust the dial to the next

high er lever until your dishes are sp ot-free. The recom men ded setting is "4".

(Factory value is "4".)

Inc rea se th e dose if there are drops of water o r lime spots on the di shes after washing.

Reduce i t if there are sticky whitis h stains on your dish es o r a bluish film on glassware or

knife blades.

As the rinse aid d iminishes, the size of the black dot

on the rinse aid level indicator changes, as illustra ted b elow.

Full

3 / 4 full

1 / 2 full

1 / 4 full - Should refill to eliminate spotting

Empty

When to Refill the Rinse Aid Dispenser

Unless the rinse-ai d warning light on the control panel is on, you can always esti mate the amount from the co lor

of the optical level indicator "C "located next to the cap. When th e rinse-aid container is f ull, the indicator

will be fully dark. The size o f the dar k dot decreases as t he ri nse -aid diminishes. You sho uld neve r let

the rinse aid level be less than 1/4 f ull.

during the next wash. Don't forget to replace the cap be fore you close dis hwa sher door.

Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming

The chem ical ingredients that compose the detergent are necessary to remove, crush and dispense all dirt out of the

di sh was he r. Most of the commercial quality detergents are suitab le for this purpose.

" "

Proper Use of Detergent

Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.

Don't put powdered detergent into the dispenser u ntil you're re ady to wash dish es.

Warning!

Amount of Detergent to Use

Dishwasher detergent is corrosive!

Take care to keep it out of reach of children.

Based on their chemical composition, detergents can be split in two basic types:

Dete rgent tablets of different brands disso lve at different speeds. For this reason some

detergent tablets cannot dissolve and develop the ir full cleaning power during short

prog rams. There fore please use l ong programs wh en u sin g deterg ent tablets, to

ensure the complete removal of detergent residua ls.

The dispenser m us t be refilled before the start of each wash cycle following the inst ructi ons

provided in the wash cycle table . Your dis hwa sher uses less de tergent and rinse aid than

Conventiona l dis hwa sher. Gener ally, only one tablespoon of detergent is needed for

a normal wash load. More heavily soiled items need more detergent. Alway s ad d the

detergent just be fore starting the dishwasher, otherwise it could get damp and will not

dissolve properly.

Concentrated Detergent

Detergent Tablets

Detergent Dispenser

co nventional, alkaline dete rgents with caus tic components

low al kaline co ncentrated detergents with n atural enzymes

Normally new pulver ised detergent is with out phosphate. T hus the water softener fu nction of

phosphate is not given. In this case we recommend to fill salt in the salt con taine r even when

the hardness of water is only 6 dH. If dete rgents witho ut phosphate are used in the case of hard water

often white spots appear on d ishes and glasses. In this case please add more detergent to reach

better results. Detergents without chlorine do only bleach a little. Stron g and coloured spots wil l not

be removed completely. In this case please choose a program with a higher temperature.

Detergents

There are 3 sorts of d etergents

1.With phosphate and with chlorine

2.With phosphate and without chlorine

3.Withou t phosphate and without chlorine

Always add the detergent just before starting each wash cycle.

Only use branded detergent aid for dishwasher.

If the lid is closed: press release button. The lid will spring open.

Detergent powder

Fill the detergent dispenser with detergent.

The marking indicate s the dosing levels , as

Illustrated :on the right

Plea se observe the m anufact urers do sing and stor age

Recommendations as stated on the detergent packaging.

Close the lid and p ress on it until it locks into place.

If the dishes are heavily soiled , add an additional prewash detergent dose.

This detergent will take effect during the pre-wash phase.

Filling the detergent dispenser

You information about the a mount of detergent for th e single programme on page 14.

will find

Be aware that depend ing on th e so iling of wate r, setting may be diffe rent.

Please observe the manufacturer's recommendations on the detergent packaging.

1. Place the main washing cycle deter gent in the st orage

compartment indicated with an A on the picture.

Th e marking on the compartment indica tes the dosing

level.

2. Place pre-wash detergent cycle detergent anywhere

inside the inner tank

“ ”

Cutlery with wooden, horn china or

mother-of-pearl handles

Plast ic ite ms that are not heat resistant

Older cut lery with glued parts that are not

temperature resistant

Bonded cutler y items or dishes

Pewter or cooper items

Crystal glass

Steel items subject to rusting

Wooden platters

Items made from synthetic fibres

Some types of glasses can become

dull after a large number of washes

Silver and aluminum parts have a

tendency to discolour during washing

Glazed patterns may fade if machine

washed frequently

Are not suitable

Are of limited suitability

Dishes and items of cutlery must not lie inside one another, or cover each oth er.

The upper basket is designed to ho ld more delicate and lighter dishware such as glasses , coffee

and tea cups

Long bladed knives stored in an upright position are a potential haza rd!

Long and/or sharp items o f cut lery such as carving knives must be positioned

horizonta lly in the upper basket.

Please do not ove rload your dishwasher. This is important for good results and for

reasonab le consumption of energy.

To avoid damage , glasses should not touc h on e an other.

Load lar ge and difficult to clean it ems in the lo wer basket.

Load hollow items suc h as cups, gl asses, pans etc. With the opening facing downwards so that

water can not collect in the container or a deep b ase.

Consider buying utensils which are identified as dishwasher-proof.

Use a mild detergent that i s described as 'kind to dishes'. If necessary, seek further

information from the detergent manufacturers.

For particular items, select a program w ith

To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately

after the programme has ended.

t he lo west possible temperature.

(For best performance of the dishwasher, follow the se loading guidelines.

Features and appearance of baskets and cutler y ba skets may vary from your model.)

Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.

It is not necess ary to rinse the dishes under running water.

Place objects in the dishwasher in following way:

1.Items such as cups, glasses, pots /pans, etc. are faced downwards.

2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.

3.All utensils are stacked securely and can not tip over.

4.All utensils are placed in the way that the spray arms can rotate freely during washing.

Very sm all items should not be washed in the dishwasher as they could easily fall out of the basket.

To prevent water dripping fr om the uppe r basket into the lower basket, we recommend that you

empty the lower basket first

, followed by the

upper basket.

For better stacking of pots and pans, the spikes can be folded

down as show on the picture below.

The upper basket is designed to hold m ore delicate

and lighter dishware such as glasses, coffee and

tea cups and saucers, as well as plates, sm all bowls

and shallow pans (as long as they are not too dirty).

Position the dishes and co okw are so that they will

not get moved by the spray of w ater.

Pots, serving bowls, etc, must alw ays be placed to p down.

Deep pots should be slan ted to allow water to flow out.

Please be reminded that:

The B otto m Basket featur es fo lding spikes so that larger or more pots and pans can be loade d.

They do not nest together.

Silverware is placed with the male face up.

Long utensils in the middle.

Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the

spoons should be loaded separately into the appropriate slots, utensils should be placed in the

horizontal position at the front of the upper basket .

Especially long

Do not let any item extend through the bottom.

Always load sharp utensils with the sharp point down!

The height of th e up per rack can be easi ly ad just ed to

accommodate taller dishes in ei ther the uppe r and lo wer

rac k. To rai se the ra ck t o the upper p osition, lift rack until

both sides are a t the same h eigh t. The rack will secure

into pla ce. To lower the rack , pu sh d own on the h andle

and release.

For better stacking of cups, th e shelve s can be fold ed

down as show on the picture belo w.

We suggest that you place large items and the most

difficult to clean items such as

pots, pans, lids, serving dishes and bowls, as shown

in the figure below. It is preferable to place serving

dishes and lids on the side of the racks in order to

avoid blocking the rotation of the top spray arm.

into the lower bask et:

For a top quality cleaning, place the silverware in the basket m aking sure th at:

Means: Rinse -aid dispenser needs to be filled.

( )

*EN 50242 : This programme is the test cycle. The information for comparability test

in accordance with EN 50242, as follows:

Capacity: 15 settings

Position Upper ba sket:

Rinse aid setting: 6

PI:0.49w;Po:0.45w

Lower position

Starting a cycle wash

Normal

Rapid

Glass

5/30g

1or2 p ieces

5/ 30g

1or2 pieces

5/30g

1or2 pi eces

For normally soiled loads,

su ch as pots plates

glasses and lightly

so iled pans.

、、

For heaviest soil ed crockery,

and norm ally soiled pots

pans dishes etc with d ried

on soiling.

、

A shorter wash for lightly

soiled loads and quick

wash.

Pre-wash (50 )

Wash (6 0 )

Rinse

Rinse(70 )

Drying

℃

Pre-wash(45 )

Wash (55 )

Rinse

Rinse (65 )

Drying

℃

Pre-wash

Wash (45 )

Rinse(55 )

Drying

℃

Wash ( 45 )

Rinse

Rinse ( 55 )

℃

(50 )℃

185

220

175

1.3

0.86

1.6

0.75

17.5

13.5

(65 )

Rinse

Rinse (65 )

Drying

wash

℃

12.5

1.35

35g

1 piece

25g

5/30g

1 piece

For lightly soiled crockery

and glass.

130

0.9

Pre-wash

Wash (40 )

Rinse

Rinse(60 )

Drying

℃

11~1 50.9~1.3

150

5/ 30g

1or2 pieces

Pre-wash (45 )

Auto was h(45-55 )

Rinse

Rinse(6 5 )

Dryi ng

℃

Auto sensing wash, lightly,

normally or heavily soiled

crockery, with or with out

dried-on food

Intensive

(*EN 50242)

This is standard programme, it is

suitable to clean normally soiled

tableware and it is the most efficient

programme in terms of its combined

energy and water consumption for

that type of tableware.

For norma lly soiled loads

th at need quick wa sh.

90 Min

Draw out the lower and up per basket, load the d ishes and pu sh t hem back.

It is lo ad the lower basket first, then the upper one (s ee t he section e ntitled

Loading the Dishwasher ).

Pour in the detergent (see the sect ion e ntitled .

Insert the plug into the socket. The power supply is 2 20-240 VAC /50 HZ, the specification

of the socket is 10A 250VAC. Make sure that the wa ter supp ly is turn ed on to full pressure.

Open the door, touch the power button, and the On/Off light will turn on.

f a program is selected, the resp onse light will . Then close the door,

re com men ded to

turn on the d ishw ash er

wi ll start its cyc le.

“ ”

" Prior to first time use"

Touch any program button, i

If you open the door , the ma chine will pause. The program light will

stop blinking and the buzzer w ill mooing every minute unless you close the door . After

you close the door ,the machine will keep on working again .

during a wash cycle

A forgotten dish can be added any time before the detergent cup opens.

Add forgotten dishes.

Close the door

After the spray arms stop working, you can open the door

completely.

Open the door a little .

The dishwasher will start running again.

It is dangerous to open the door mid-cycle,

as hot steam may scald you.

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off

the appliance using the ON/OFF button, shut off the wa ter supp ly and open the door of the dishwashe r.

Wait for a few minutes before unlo ading th e dishwasher to avoid handlin g the dishes and utensils while th ey

are still hot and more susceptible to break . They wi ll also dry be tter.

Switching Off the Dishwasher

The program light is on but is not blinking,

only in this case has the program ended.

1.Open the door.Switch off the dishwasher by pressing the ON/OFF button.

2.Turn off the water tap!

Open the door carefully.

Hot dishes are sensitive to minutes before removing from

the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they

will be cooler and the drying will be improved.

shocks. The dishes should cool down for around 15

Unloading the dishwasher

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto

the dishes in the lower one.

It is normal for the dishwasher to be wet inside.

Premis e:

A can only be modified if it has only be en running for a short time. Otherwise, the

detergent may have already been re leased, and the appliance may have already drained the wash water.

If this is the case, the detergent disp enser must be refilled (see the section entitled

Open the doo r , , the machine will be in standby state,

then you can change the program to the desired cyc le setting (see the section entitled " Starting a

wash cycle. . ." ).

touch more than 3 seconds

runn ing cycle

"Filling the detergent

dispenser"

the running program

button

The filter prevents larger remnant s of food or other objects from getting inside the pump.

The residues may block the filter, in this case they must be removed .

The filter system consists of a coar se filter,a flat (Main filter)

And a microfilter(Fine filter).

Fo od and soil particles trap ped in this filter are pulverize d by a

specia l jet on the lower spray arm and w ashed down drain.

La rger items, such as p ieces of bon es o r glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently sque eze the tap on th e top of this

filter and lift out.

This filter holds soil and food residues in the sump a rea a nd

preve nts

the m fr om being red epo site d on the dishes d uring wash cycle.

Main filter

Coarse filter

Fin e filter

Filter assembly

The filter efficiently

For best performance and results, the filter must be cleaned re gularly. this reason, it is a goo d idea to

remove the larger food particles trapp ed in the filter aft er e ach was h cycle by rinsing the sem icircular filte r and

cup under runnin g water. To remove th e filter device, pull the cup handle in the upward d irection.

remo ves food particle s from the wa sh w ater, allowing it to be rec ycle d during the cycl e.

For

The d ishw ash er must never b e used without the filters.

Impro per replacement of the f ilter may reduce the perform ance level of the appliance

and dama ge dishes and utensils.

Step 1 Turn the：

filter counterclockwis e,

Step 2 lift the filter assy up：

When following this procedure from step1 to step 2, the filter system will be removed;

when following it from Step 2 to Step 1, the filter system will be installed.

The control pane l can be clea ned by using a lightly dampened cloth.

After cleaning, m ake sure to dry it thoroug hly.

For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on a ny part of the dishwasher.

Winterzing

1 .Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filt er at the bottom of the tub and use a sponge to soak up water in the sump.

please take frost protection measures on the dishwasher in winter. Every fter washing cycles,

please operate as follows

time a

：

Cleaning the Filter

Cleaning The Door

To clea n the coarse filte r an d the fine filt er, u se a cleaning brush. Reassemble the filter parts (see page 16) and

rei nsert the m in the dishwasher, position ing them in their sea t and pressing downw ards.

When cleaning the filters, Otherwise, the filters could be

contorted and the performance of the dishwasher could be decreased.

do not knock the m.

To clean the edge around the door, you

To avoid pene tration of water into the door lock and electrical components, do not

use a spray cleaner of any kind.

sh ould only use a s oft, ward and damp

cloth.

Never use a spray cleaner to clean the door panel as it may dam age the door loc k

and electrical components.

Abrasive ag ent s or some paper towels should not be used because of the risk of

scratching or leaving spots on the stainl ess steel surface.

Cleaning the Spray Arms

If your dishwasher cannot work because of the ice,

please contact professional service persons.

It is necessary to clean the spra y arms regularly for hard

wate r che micals will clog the sp ray arm jets a nd bearings.

- After each cyc le, c heck for any debris in the filte r to avoid future b lock age.

- By unscrewing the coarse filter, you can remove the filter system. Remove any food remna nts and

clean the filters under running water.

Remarks:

The entire filter assembly should be cleaned once a week.

To remove th e lower spray arm, pull out the spray arm u pwa rd.

To remove the up per spray arm, hold the nut, rotate the arm

clockwise to remove it.

Wash the arms in soapy and warm water and use a soft brush to

clean the jets. Replace them after rinsing them thoroughly.

It is recommend that you r un a wash cy cle with the

dishwasher empty an d the n remove the plug from the

sock et, turn off the wa ter supply and leave the door of

the appliance slightly open. This will help the d oor

seals to l ast longer and prevent odours from forming

withi n the appliance.

If the appliance must be moved, tr y to keep it in the

vertical position. If absolutely necessary, it can be

positioned on its back.

One of the factors that cau se odours to form in the

dishwasher n the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

is rema inin g food strapped i

Before cleaning or performing maintenance, always

remove the plug from the socket.

To clean the e xterior and rubber p arts of the dishw asher,

do not use solvents or abrasive cle ani ng products.

Only use a cloth with warm so apy water.

To remove spots or stains from the surface of the

interior, use a cloth dampened with water an a little

vinegar, or a cleaning pro duct mad e specifically for

dishw ashers.

Remove the Plug

No Solvents or Abrasive Cleaning

Moving the Appliance

Seals

After every wash, turn off the water supply to the

appliance and leave the door slightly op en so that

moisture and odours are not trapped inside.

After Every Wash

When not in use for a Timelong

Th e installation of t he pipes

and electrical equipments

should be done by professionals.

Electrical Shock electrical power

dishwasher.

Failure to do so can result in death or electrical shock.

Hazard. Disconnect

before installing

The i nstallation positi on of dishwasher sho uld be near the existi ng in let and drain hoses and power co rd.

One side of the ca binet sink should be chosen t o facilitate the connection of drain hoses of the dis hwasher.

Installation preparation

Note: please check the accompanying installation accessories(hook for aes thetic panel, screw)

●

Page is loading ...

Brandt DVH1538J Owner's manual

Brand: Brandt

Model: DVH1538J

Category: Dishwashers

Type: Owner's manual

This manual is also suitable for

DVH15423J

Download PDF

report

Brandt DVH1538J Owner's manual

This manual is also suitable for

Brandt DVH1538J Owner's manual

Related papers

Other documents