
Calibrate your door
Step 1: Open the door, wait for 6s, and tap
on "Next".
Step 2: Close the door, wait for 6s, and tap
on "Next".
Step 3: Open the door, wait for 6s, and tap
on "Next".
Step 4: Extend the latch, close the door, wait
for 6s, and tap on "Next".
Note:
1. Door sensor should be mounted within
1''(25mm) from the edge of your door, within
1”(25mm) from the top of the interior
assembly.
2. Open your door more than 45° in step 1
and 3.
3. Stay for 6s before tapping on "Next" in
each step.
4. There should be no magnets near the
door sensor.
DOOR SENSOR
12