2. Hilti
  3. DX 462 CM-HM

Hilti DX 462 CM-HM Operating instructions

  • Hello! I've reviewed the operating instructions for the Hilti DX 462 CM/HM fastening tool. This document includes important details regarding the tool's operation, noise levels, and testing environment. It also outlines compliance with E DIN EN 15895. I'm ready to answer your questions about this tool based on the provided document.
  • What are the noise levels of the DX 462 HM?
    What are the noise levels of the DX 462 CM?
    What standard does the operation and setup of the device conform to?
DX 462 CM/HM
284172
Operating instructions en
Mode d’emploi fr
zh
ja
ko
cn
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
1
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
7.1
64708
7.2
D
X
4
5
5
D
X
4
5
5
X
-
H
M
X
H
R
-
9
7
8
7.3
X-HM
X-CM
X-HM
8.3
X-HM
8.4
7.4
햵
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
X-HM
3
2
8.5 8.10 8.11
8.12
8.13
8.7
8.8
8.6
8.9
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
8.14 8.15
1
X-HM
2
3
4
9
8
10
max.
0,8 mm
6
7
11
12
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
29
zh
29
30
31
32
32
33
34
35
37
39
39
40
40
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
30
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
31
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
32
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
33
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
34
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
35
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
36
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
37
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
38
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
39
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
40
zh
hse
12.
DX 462 HM/CM
DX 462 HM/M
4
(400x400x50 mm)
聲明的噪音特性測量值根據2006/42/EC機械指令與
E DIN EN 15895範規 DX 462 HM DX462 CM
噪音（動力）等級: L
WA, 1s
1
110 dB(A) 108 dB(A)
在工作場所所釋放的噪音等級: L
pA, 1s
2
108 dB(A) 107 dB(A)
尖峰聲壓釋放等級: L
pC, peak
3
135 dB(C) 134 dB(C)
操作與設置環境：
擊釘槍的操作與設置符合E DIN EN 15895-1規範，
在位於Müller-BBM GmbH的半消音測試空間進行。測試空間的周圍環境符
合DIN EN ISO 3745規範。
測試程序：
在消音室的反射表面區域中以包絡曲面法測試，符合E DIN EN 15895、
DIN EN ISO 3745及DIN EN ISO 11201的規範。
注意：量測的噪音外洩值及其對應的不確定性，為測量時可能產生之噪音值的較高
臨界值。
改變操作條件可能造成噪音值偏差。
1
± 2 dB (A)
2
± 2 dB (A)
3
± 2 dB (C)
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
41
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
42
zh
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
*284172*
284172
Hilti Corporation
LI-9494 Schaan
Tel.: +423 / 234 21 11
Fax:+423 / 234 29 65
www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan
W 2815 | 0812 | 10-Pos. 4 | 1
Printed in Liechtenstein © 2012
Right of technical and programme changes reserved S. E. & O
.
284172 / A5
Printed: 07.07.2013 | Doc-Nr: PUB / 5126493 / 000 / 00
/