2. Highwood
  3. Lehigh Rocking Chair

Highwood Lehigh Rocking Chair Assembly Instructions

  • Hello! I've reviewed the assembly guide for the Lehigh Collection AD-RKCH1|AD-RKCH2 Rocking Chair. I understand it includes step-by-step instructions for attaching the seat and back to the leg/arm using specific bolts and a hex key. I'm ready to answer any questions you have about assembling your rocking chair.
  • What is the first step in assembling the rocking chair?
    Which bolts are used to attach the back of the chair?
    What tool is included for assembly?
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 2
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Lehigh Collection
Rocking Chair
Assembly Guide
HARDWARE INCLUDED
AD-RKCH1|AD-RKCH2
04.21.21
AQty: 2
1/4-20 x 1.5"
1) Attach Seat to Leg/Arm using
(2) B bolts and (2) C bolts.
(Align Back as shown for C bolts)
2) Attach Back to Leg/Arm
using (1) A bolt
3) Repeat on other Side.
B
1/4-20 x 2"
Qty: 4
C
1/4-20 x 3"
Qty: 4
BACK ALIGNMENT
BACK
A
C
B
SEAT
LEG / ARM
/