2. Computers & electronics
  3. Software
  4. Juniper
  5. Connectivity Services Director

Juniper Connectivity Services Director User guide

  • Hello! I'm your chat assistant, and I've reviewed the Junos Space Connectivity Services Director User Guide for version 5.3R1. This document thoroughly covers how to use the director for managing routing and tunnel services, network topology, prestaging devices, and provisioning services. I understand the system administration, service design, monitoring, and detailed configuration processes. Feel free to ask me any questions about specific features, functionalities, or best practices described in the guide.
  • What is the purpose of Connectivity Services Director?
    What are the main modes of operation in Connectivity Services Director?
    What is the functionality of Build mode?
    What information does the Monitor mode provide?
    What does the Fault mode allow me to do?
Junos® Space
Connecvity Services Director User
Guide
Published
2023-11-02
RELEASE
5.3R1
Juniper Networks, Inc.
1133 Innovaon Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.
in the United States and other countries. All other trademarks, service marks, registered marks, or registered service
marks are the property of their respecve owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publicaon without noce.
Junos® Space Connecvity Services Director User Guide
5.3R1
Copyright © 2023 Juniper Networks, Inc. All rights reserved.
The informaon in this document is current as of the date on the tle page.
YEAR 2000 NOTICE
Juniper Networks hardware and soware products are Year 2000 compliant. Junos OS has no known me-related
limitaons through the year 2038. However, the NTP applicaon is known to have some diculty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentaon consists of (or is intended for use
with) Juniper Networks soware. Use of such soware is subject to the terms and condions of the End User License
Agreement ("EULA") posted at hps://support.juniper.net/support/eula/. By downloading, installing or using such
soware, you agree to the terms and condions of that EULA.
ii
Table of Contents
About This Guide | xxxviii
1
Overview
Working with Connecvity Services Director | 2
Connecvity Services Overview | 2
Geng Started with Connecvity Services Director | 3
Connecvity Services Director REST API Overview | 6
Understanding the Need for Connecvity Services Director for Managing Services | 12
Benets of a Unied User Interface for Roung and Tunnel Services with Connecvity Services
Director | 13
Connecvity Services Director Overview | 14
Understanding the Connecvity Services Director User Interface | 16
Understanding the Usage and Layout of Connecvity Services Director Views and Tasks | 25
Understanding Task Categories in Connecvity Services Director | 26
Understanding Connecvity Services Director User Administraon | 28
Logging In to Connecvity Services Director | 29
Accessing the Services Acvaon Director GUI | 31
Changing Your Password for Connecvity Services Director | 32
Logging Out of Connecvity Services Director | 34
Geng Started Assistant Overview in Services Acvaon Director | 35
Service View Tasks and Lifecycle Modes | 37
Understanding the Service View Tasks Pane in Build Mode | 37
Understanding the Service View Tasks Pane in Deploy Mode | 40
Understanding the Service View Tasks Pane in Monitor Mode | 42
Understanding the Service View Tasks Pane in Fault Mode | 45
iii
About Build Mode in Service View of Connecvity Services Director | 46
About Deploy Mode in Service View of Connecvity Services Director | 48
About Fault Mode in All Views of Connecvity Services Director | 50
About Monitor Mode in Service View of Connecvity Services Director | 51
Network Services Overview | 54
Geng Started with Connecvity Services Director | 55
Prestaging Devices Overview | 58
Junos Space Layer 2 Services Overview | 59
Junos Space Layer 3 Services Overview | 71
Provisioning Process Overview | 74
Seamless MPLS Support in Junos Space Overview | 77
Service Aributes Overview | 79
Service Order States and Service States Overview | 96
Understanding VLAN Manipulaon (Normalizaon and VLAN Mapping) on Ethernet Services | 99
VLAN Pool Proles Overview | 104
Redundant Pseudowires for Layer 2 Circuits and VPLS | 105
VPLS over GRE Overview | 106
Junos Space Network Topology Overview | 108
Service Recovery Overview | 109
Mulcast L3VPN Overview | 110
Mul-Chassis Automac Protecon Switching Overview | 111
Inverse Mulplexing for ATM Overview | 111
Rendezvous Point | 113
Understanding Mulcast Rendezvous Points, Shared Trees, and Rendezvous-Point Trees | 113
Understanding PIM Sparse Mode | 115
Conguring Shared-Tree Data Distribuon Across Provider Cores for Providers of MBGP MVPNs | 119
iv
Conguring SPT-Only Mode for Mulprotocol BGP-Based Mulcast VPNs | 121
Conguring VRF Route Targets for Roung Instances for an MBGP MVPN | 123
Stac Pseudowire Provisioning for VPLS Services | 124
2
Geng Started With Connecvity Services Director
Understanding Connecvity Services Director System Administraon and Preferences | 126
Understanding Connecvity Services Director User Administraon | 126
Understanding the System Tasks Pane | 127
Audit Logs Overview | 128
Viewing Audit Logs From Connecvity Services Director | 129
Managing Jobs | 130
Collecng Logs for Troubleshoong | 132
Seng Up User and System Preferences | 134
Accessing the Preferences page | 135
Choosing Server Time or Local Time | 135
Specifying Search Preferences | 135
Retaining Connecvity Services Director Reports | 136
Modifying Services Acvaon Parameter Sengs | 136
Specifying Topology Preferences | 144
Changing Monitor Mode Sengs | 144
Disabling Data Collecon for Monitors | 145
Changing the Polling Interval | 146
Specifying Database History Retenon | 147
Changing Alarm Sengs | 148
Conguring Global Alarm Nocaons | 148
Retaining Alarm History | 148
Specifying Event History | 149
Enabling Alarms | 149
Changing the Severity of Individual Alarms | 181
Conguring Threshold Alarms | 181
Conguring Individual Alarm Nocaons | 182
Disabling Opcal Performance Monitoring | 182
Specifying NorthStar Controller Preferences | 182
v
3
Working with the Dashboard
About the Dashboard | 185
Understanding the Dashboard | 185
Using the Dashboard | 186
Using Dashboard Widgets | 186
Dashboard Widget Reference | 187
Device Alarms Widget | 187
Service Alarms by Severity Widget | 188
Cong Deployment Jobs Status Widget | 189
Device & Port Ulizaon Heatmap Widget | 190
Port Status - Physical Widget | 194
4
Working in Build Mode
About Build Mode | 197
Understanding Build Mode in Views Other than Service View of Connecvity Services Director | 197
Understanding the Build Mode Tasks Pane in Views Other than Service View | 201
Discovering Devices | 205
Discovering Devices | 205
Troubleshoong Device Discovery Error Messages | 206
Viewing the Browneld Job | 208
Creang Custom Device Groups | 211
Understanding Custom Device Groups | 211
Creang Custom Device Groups | 213
Creang Custom Groups | 214
Creang a Custom Group | 214
Conguring Quick Templates | 218
Understanding Quick Templates | 218
Conguring and Managing Quick Templates | 220
vi
Creang a Quick Template | 221
Applying Templates to Devices | 222
Eding a Quick Template | 223
Deleng a Quick Template | 223
Cloning a Quick Template | 223
Using the Quick Template Details Window | 224
Viewing Deployed Quick Templates | 224
Conguring Device Sengs | 226
Understanding Device Common Sengs Proles | 226
Creang and Managing Device Common Sengs | 227
Managing Device Common Sengs | 227
Creang a Device Common Sengs Prole | 229
Specifying Basic Sengs for Device Common Sengs | 231
Specifying Management Sengs for Roung Device Common Sengs | 233
Specifying Protocol Sengs for Roung Device Common Sengs | 236
Reviewing and Saving a Device Common Sengs Conguraon | 239
What to Do Next | 240
Assigning Device Common Sengs to Devices | 240
Assigning Device Common Sengs | 241
Eding the Assignments of the Device Common Seng | 242
Conguring Class of Service (CoS) | 244
Understanding Class of Service (CoS) Proles | 244
Creang and Managing Wired CoS Proles | 250
Managing Wired CoS Proles | 250
Using the Default CoS Proles for Routers | 251
Using the Default CoS Proles for Campus Switching ELS with Hierarchical Port Scheduling | 252
Using the Default CoS Proles for Data Center Switching | 252
Creang a Wired CoS Prole | 252
Specifying Sengs for a Roung, Switching, and Campus Switching ELS CoS Prole | 253
Specifying Sengs for a Campus Switching ELS CoS Prole with Hierarchical Port Scheduling
(ETS) | 258
Specifying Sengs for a Data Center Switching CoS Prole | 263
What to Do Next | 273
vii
Conguring Link Aggregaon Groups (LAGs) | 274
Understanding Link Aggregaon | 274
Managing and Creang a Link Aggregaon Group | 274
Link Aggregaon Group Opons | 276
Creang a Link Aggregaon Group | 277
What To Do Next | 278
Managing Network Devices | 279
Viewing the Device Inventory Page in Device View of Connecvity Services Director | 279
Viewing the Physical Inventory of Devices | 282
Viewing Licenses With Connecvity Services Director | 283
Viewing a Device's Current Conguraon from Connecvity Services Director | 285
Accessing a Device’s CLI from Connecvity Services Director | 285
Accessing a Device’s Web-Based Interface from Connecvity Services Director | 286
Deleng Devices | 287
Reboong Devices | 288
5
Building a Topology View of the Network
Downloading and Installing CSD-Topology | 291
CSD-Topology Installaon and Conguraon Overview | 291
Installaon Prerequisites | 292
Installing the CSD-Topology Soware Using the RPM Bundle | 292
Minimum Hardware and Soware Requirements for Junos VM on VMWare | 294
Installing the JunosVM for CSD-Topology | 295
Seng Up the Datastore | 296
Creang VRR VMs | 298
Conguring the JunosVM | 306
Conguring the CSD-Topology Server with the JunosVM IP Address | 307
Verifying the Connecvity Between the CSD-Topology Server and JunosVM | 307
Verifying That the CSD-Topology Services Are Running | 308
Stopping Firewall on theCSD-Topology Server | 308
viii
Conguring Peer Routers and Topology Acquision on the JunosVM | 308
Specifying the Topology Details in the Connecvity Services Director GUI | 310
Connecng an x86 Server to the Network | 311
Interacve Method of Installing the RPM Image and CSD-Topology Soware from a USB or DVD
Drive | 316
Conguring Topology Acquision and Connecvity Between the CSD-Topology and Path
Computaon Clients | 320
Conguring PCEP on a PE Router (from CLI) | 320
Conguring Connecvity for BGP-LS Topology Acquision | 323
Conguring BGP-LS Topology Acquision on the CSD-Topology | 324
Conguring Topology Acquision on the PCC Routers | 325
Conguring Connecvity for OSPF Topology Acquision | 326
Conguring OSPF on the CSD-Topology | 326
Conguring OSPF Over GRE on the CSD-Topology | 327
Conguring Connecvity for IS-IS Topology Acquision | 328
Conguring IS-IS on the CSD-Topology | 328
Conguring IS-IS Over GRE on the CSD-Topology | 329
Accessing the Topology View of CSD-Topology | 331
Understanding the Network Topology in Connecvity Services Director | 332
Monitoring the Topology of Network Elements Managed by CSD-Topology Overview | 333
Specifying Topology Preferences | 334
CSD-Topology Topology Map Window Overview | 336
Working with the Graphical Image in the Topology View Window | 338
Expanding and Collapsing Groups by Using the Topology Map Grouping Shortcut Menu | 341
Filtering Links, LSPs, and Services by Using the Topology Map Node Shortcut Menu | 341
Removing the Highlighted LSPs by Using the Topology Map LSPs Shortcut Menu | 343
Viewing the Service Path by Using the Topology Map Service Shortcut Menu | 344
Filtering Devices, LSPs, and Services for Sorng and Segregang the Topology View | 345
Segregang the Displayed Devices by Searching the Enre Topology View | 347
ix
Resynchronizing the Topology View | 347
Viewing Device Details of a CSD-Topology for Examining Trac Transmission | 348
Viewing LSP Details of a CSD-Topology for Analyzing Network Changes | 350
Viewing Link Details of a CSD-Topology for Determining the Operaonal Status | 353
Viewing Service Details of a CSD-Topology for Monitoring and Troubleshoong Service Parameters
| 354
Viewing Topology Map Group Details in a Pop-Up Dialog Box | 357
Viewing Topology Map Device Details in a Pop-Up Dialog Box | 358
Viewing Topology Map Link Details in a Pop-Up Dialog Box | 360
Viewing Topology Map LSP Details in a Pop-Up Dialog Box | 362
Viewing Topology Map Service Details in a Pop-Up Dialog Box | 364
Enabling the Collecon of LSP and Service Associaon Details | 365
Using Custom Grouping for Devices in a CSD Topology | 366
Viewing Generated Alarms for Services in the Topology View | 367
Viewing the Opcal Link Details for Examining the Performance of Opcal Links | 368
6
Prestaging
Prestaging Devices Overview | 371
Prestaging Devices Process Overview | 371
Prestaging Workow in Connecvity Services Director | 375
Prerequisites for Prestaging Devices in Connecvity Services Director | 378
Discovering and Assigning All N-PE Devices | 380
Discovering Device Roles | 380
Assigning Device Roles | 381
Discovering and Assigning N-PE Devices with Excepons | 382
Including Interfaces in UNI Role Assignments | 383
Comming Your Prestaging Choices | 383
Prestaging ATM and TDM Pseudowire Devices | 385
x
Discovering and Assigning Provider Role or LSP Role for Devices with Excepons | 390
Including Interfaces in UNI Role Assignments | 390
Comming Your Prestaging Choices | 391
Discovering and Assigning All Provider or LSP Devices | 392
Discovering LSP Device Roles | 393
Assigning Provider Device Roles | 393
Prestaging Rules | 395
Prestaging: Managing Devices and Device Roles | 399
Discovering Tunnel Devices | 399
Adding a UNI | 401
Unassigning Device Roles | 402
Deleng UNIs | 403
Discovering Device Roles | 404
Excluding Devices from N-PE Role Assignment | 405
Excluding Interfaces from UNI Role Assignments | 405
Unassigning N-PE Devices | 406
Viewing N-PE Devices | 407
Viewing N-PE Devices in a Table | 407
Viewing Prestaging Stascs | 409
Viewing the Prestaged Device Details | 409
Viewing Services for Devices and Device Roles in a Graphical Form | 410
Viewing Prestaging Rules | 411
Viewing Prestaging Rules in a Table | 411
Managing Prestage Device Jobs | 412
Specifying the Wait and Idle Times for Prestaging Devices | 415
Prestaging: Managing IP Addresses | 416
Creang an IP Address Pool | 416
Managing Resources | 418
xi
Specifying IPv4 Addressing Assignment in IP Service Denions | 420
Device Conguraon Prerequisites to Prestaging Examples | 423
Example: Base Conguraon for N-PE Device in a Mulpoint Service | 423
Example: Base Conguraon for N-PE Device in an E-Line (LDP) Service | 425
Example: Base Conguraon for a P Router | 427
Prestaging Services | 430
Creang and Handling a Service Recovery Request | 431
Selecng a Service Denion in the Wizard for Creang a Service Recovery Request | 432
Specifying Devices and Filters in the Wizard for Creang a Service Recovery Request | 434
Reviewing the Congured Sengs in the Wizard for Creang a Service Recovery Request | 438
Viewing Service Recovery Report | 440
Performing a Service Recovery on a Dened Service | 441
Processing of Device Change Nocaons Overview | 443
Handling of Out-of-Band Nocaons for Service Recovery | 446
Viewing Service Recovery Instance Details | 447
Managing Out-of-Band Nocaons for Recovered Services | 452
Viewing Details of an Out-of-Band Nocaon for Recovered Services | 454
Viewing Services Rejected During a Service Recovery | 456
Viewing Service Recovery Jobs | 457
Performing a Conguraon Audit for Recovered Services | 460
Viewing Conguraon Audit Results of Recovered Services | 462
Recovering Modicaons and Deleons Performed for Exisng Endpoints | 464
REST API Changes in Connecvity Services Director for Service Recovery | 472
Sample XPath Nocaons Received on Devices for Deleted Endpoints | 473
Sample XPath Nocaons Received on Devices for a Modied E-LAN Service | 476
Sample XPath Nocaons Received on Devices for a Created E-LAN Service | 482
xii
Sample XPath Nocaons Received on Devices for a Created IP Service | 487
Sample XPath Nocaons Received on Devices for a Created E-Line Service | 488
Sample XPath Nocaons Received on Devices for CFM Proles Associated with an E-Line
Service | 490
Sample XPath Nocaons Received on Devices for CoS Proles Associated with an E-Line
Service | 492
7
Service Design: Working with Service Denions
Service Design: Predened Service Denions | 495
Predened Service Denions | 495
Predened E-Line Service Denions | 566
Predened Mulpoint-to-Mulpoint Ethernet Service Denions | 612
Predened Point-to-Mulpoint Ethernet Service Denions | 647
Predened Full Mesh IP Service Denions | 664
Predened Hub-and Spoke IP Service Denions | 666
Service Design: Managing E-Line Service Denions | 668
Choosing a Predened Service Denion or Creang a New Service Denion | 668
Choosing a Predened Service Denion | 669
Creang an E-Line Service Denion | 678
Specifying General Informaon | 678
Specifying UNI Sengs | 683
Specifying Connecvity Informaon When Signaling Is LDP | 699
Specifying Connecvity Informaon When Signaling Is BGP | 701
Reviewing the Congured Sengs | 703
Creang an E-Line ATM or TDM Pseudowire Service Denion | 704
Specifying General Informaon for the ATM or TDM Service | 704
Specifying UNI Sengs for ATM and TDM Service Denions | 706
Specifying UNI Sengs for ATM Interfaces | 706
Specifying UNI Sengs for TDM Interfaces | 707
Specifying Connecvity Informaon for an ATM or a TDM Service | 708
Reviewing the Congured Sengs | 710
Creang a Mulsegment Pseudowire Service Denion | 711
xiii
Specifying General Informaon for the Mulsegment Pseudowire Service | 711
Specifying UNI Sengs for Mulsegment Pseudowire | 713
Specifying Connecvity Informaon for an Mulsegment Pseudowire Service | 720
Reviewing the Congured Sengs | 721
Modifying a Custom Service Denion | 722
Publishing a Custom Service Denion | 723
Unpublishing a Custom Service Denion | 724
Deleng a Customized Service Denion | 725
Viewing Service Denions | 726
Tabular View | 726
Searching for Service Denions | 727
Viewing Service Denion Details | 728
Performing Acons on Service Denions | 728
Service Design: Managing E-LAN Service Denions | 729
Creang a Mulpoint-to-Mulpoint E-LAN Service Denion | 729
Specifying General Informaon for Mulpoint-to-Mulpoint E-LAN Service Denions | 730
Specifying Advanced Sengs | 735
Specifying Site Sengs for Mulpoint-to-Mulpoint E-LAN Service Denions | 738
UNI or Site Sengs for Port-to-Port Interfaces in E-LAN Services | 738
UNI or Site Sengs for 802.1Q Interfaces in E-LAN Services | 742
UNI or Site Sengs for Q-in-Q Interfaces in E-LAN Services | 748
UNI Sengs for Services with Flexible VLAN Tagging (Asymmetric Interface Types) | 754
Reviewing the Congured Sengs | 760
Creang a Point-to-Mulpoint E-LAN Service Denion | 761
Specifying General Informaon for Point-to-Mulpoint E-LAN Service Denions | 762
Specifying Advanced Sengs | 770
Specifying UNI or Site Sengs for Point-to-Mulpoint E-LAN Service Denions | 772
UNI or Site Sengs for Port-to-Port Interfaces in E-LAN Services | 772
UNI or Site Sengs for 802.1Q Interfaces in E-LAN Services | 777
UNI or Site Sengs for Q-in-Q Interfaces in E-LAN Services | 784
UNI or Site Sengs for Services with Flexible VLAN Tagging (Asymmetric Interface Types) | 791
Reviewing the Congured Sengs | 798
xiv
Creang a Service Denion for VPLS Access into Layer 3 Networks | 799
Service Design: Managing IP Service Denions | 803
Creang a Full-Mesh IP Service Denion | 803
Specifying General Sengs Informaon | 804
Specifying Site or UNI Sengs | 808
Reviewing the Congured Sengs | 815
Creang a Hub-and-Spoke (One Interface) IP Service Denion | 816
Specifying General Informaon | 817
Specifying UNI or Site Sengs | 821
Reviewing the Congured Sengs | 828
Creang a Service Denion for E-Line Pseudowire Access into a Layer 3 VPN | 829
Creang a Mulcast VPN Service Denion | 831
8
Service Provisioning: Working with Customers
Service Provisioning: Managing Customers | 836
Adding a New Customer | 836
Deleng Customers | 837
Modifying an Exisng Customer | 837
Viewing Customer Details | 838
9
Working in Deploy Mode
About Deploy Mode | 842
Understanding Deploy Mode in Views Other than Service View of Connecvity Services Director | 842
Understanding the Deploy Mode Tasks Pane in Views Other than Service View | 845
Deploying and Managing Device Conguraons | 848
Deploying Conguraon to Devices | 848
Selecng Conguraon Deployment Opons | 849
Using the Change Request Details Page | 854
Creang a Change Request | 854
Validang Conguraon | 855
Discarding the Pending Conguraons | 855
Viewing Pending Conguraon Changes | 856
xv
Using the Pending Changes Window | 856
Using the Conguraon or Pending Conguraon Window | 856
Using the Deploy Conguraon Errors/Warnings Window | 857
Using the Conguraon Validaon Window | 857
Deploying Conguraon Changes to Devices Immediately | 857
Scheduling Conguraon Deployment | 858
Specifying Conguraon Deployment Scheduling Opons | 858
Eding Change Requests | 858
Deleng Change Request | 859
Resubming a Change Request | 860
Performing a Rollback | 860
Managing Conguraon Deployment Jobs | 861
Selecng Conguraon Deployment Job Opons | 861
Viewing Conguraon Deployment Job Details | 863
Canceling Conguraon Deployment Jobs | 863
Deploy Conguraon Window | 863
Approving Change Requests | 865
Enabling SNMP Categories and Seng Trap Desnaons | 867
Viewing Eligible Devices for Trap Forwarding | 867
Enabling Trap Forwarding | 868
Deploying SNMP Trap Conguraons | 869
Understanding Resynchronizaon of Device Conguraon | 870
Resynchronizing Device Conguraon | 876
The Resynchronize Device Conguraon List of Devices | 877
Resynchronizing Devices When Junos Space Is in NSOR Mode | 879
Resynchronizing Devices When Junos Space Is in SSOR Mode | 879
Resynchronizing Devices in Manual Approval Mode | 880
Viewing the Network Changes | 880
Viewing Resynchronizaon Job Status | 881
Managing Device Conguraon Files | 882
Selecng Device Conguraon File Management Opons | 882
Backing Up Device Conguraon Files | 883
xvi
Restoring Device Conguraon Files | 884
Viewing Device Conguraon Files | 884
Comparing Device Conguraon Files | 884
Deleng Device Conguraon Files | 885
Managing Device Conguraon File Management Jobs | 885
Enabling or Disabling Network Ports on Routers | 886
Deploying and Managing Soware Images | 887
Managing Soware Images | 887
Selecng Soware Image Management Opons | 888
Adding Soware Images to the Repository | 888
Using the Device Image Upload Window | 889
Viewing Soware Image Details | 889
Using the Device Image Summary Window | 889
Deleng Soware Images | 890
Deploying Soware Images | 890
Specifying Soware Deployment Job Opons | 891
Selecng Soware Images To Deploy | 891
Selecng Opons for Soware Deployment | 893
Summary of Soware Deployment | 895
Managing Soware Image Deployment Jobs | 895
Selecng Soware Image Management Opons | 895
Viewing Soware Image Job Details | 897
Using the Device Image Staging Window | 897
Canceling Soware Image Jobs | 898
10
Service Provisioning: Working with Service Orders
Service Provisioning: Viewing the Congured Services and Service Orders | 901
Viewing Service Orders | 901
Viewing Service Orders in a Table | 901
Viewing Service Order and Service Details | 903
Viewing Services | 907
Viewing Services in a Table | 907
xvii
Viewing the Congured E-Line, IP, and E-LAN Services | 910
Viewing the Conguraon Details of VPN Services | 913
Service Provisioning: Managing E-Line Service Orders | 915
Creang a Service Order | 915
Creang an E-Line ATM or TDM Pseudowire Service Order | 916
Selecng the Service Denion | 916
Entering General/Connecvity Sengs Informaon | 918
Specifying Endpoint Informaon | 919
Specifying Template Sengs | 922
Reviewing the Congured Sengs | 924
Deploying the New Service | 924
Creang an E-Line Mulsegment Pseudowire Service Order | 925
Selecng the Service Denion | 925
Entering General/Connecvity Sengs Informaon | 927
Specifying Endpoint A Informaon | 928
Specifying Endpoint Z Informaon | 929
Specifying Stching Endpoint(s) Sengs | 931
Reviewing the Congured Sengs | 932
Creang an E-Line Service Order | 933
Selecng the Service Type | 933
Entering General Sengs Informaon | 934
Specifying the Connecvity | 936
Specifying QoS Sengs | 938
Specifying OAM Sengs | 938
Specifying Endpoint Informaon | 939
Specifying Template Sengs | 943
Reviewing the Congured Sengs | 944
Specifying Connecvity and Endpoint Informaon for Managing VLANs | 945
Deploying and Monitoring the Progress of the New Service | 945
Creang a Bulk-Provisioning Service Order for Pseudowire Services | 946
Creang an Inverse Mulplexing for ATM Service Order | 949
Provisioning a Single-Ended E-Line Service | 951
xviii
Selecng Specic LSPs for Connecvity Services | 953
Associang an LSP with an E-Line Service | 954
Viewing LSP Details in a Service Order | 954
Viewing LSP Details in a Service | 955
Viewing LSP Conguraon Details | 955
Stching Two E-Line Pseudowires | 956
Creang and Deploying a Mulsegment Pseudowire | 958
Deacvang a Service | 961
Reacvang a Service | 963
Force-Deploying a Service | 964
Recovering a Service Denion through Force Upload | 967
Decommissioning a Service | 968
Viewing Alarms for a Service | 971
Inline Eding of E-LAN and IP Service Orders | 972
Interconnecng an IP Service with an E-LAN Service | 975
Changing the Logical Loopback Interface for Provisioning | 977
Service Provisioning: Managing E-LAN Service Orders | 979
Creang a Mulpoint-to-Mulpoint E-LAN Service Order | 979
Selecng the Service Denion | 980
Entering Service Parameters Informaon | 981
Specifying OAM Sengs | 987
Selecng N-PE Devices | 987
Specifying Node Sengs | 988
Seng Aributes for Nodes or Devices on a Service | 988
Seng Aributes for Nodes or Devices on a Service with Flexible VLAN Tagging | 992
Modifying Site Sengs | 992
Specifying QoS Sengs | 995
Specifying Template Sengs | 996
Reviewing the Congured Sengs | 997
Deploying the New Service | 997
xix
Creang a Point-to-Mulpoint E-LAN Service Order | 998
Selecng the Service Denion | 999
Entering Service Parameters Informaon | 1000
Specifying OAM Sengs | 1006
Selecng N-PE Devices | 1006
Specifying Node Sengs | 1007
Seng Aributes for Nodes or Devices on a Service | 1008
Seng Aributes for Nodes or Devices on a Service with Flexible VLAN Tagging | 1012
Modifying Site Sengs | 1013
Specifying QoS Sengs | 1016
Specifying Template Sengs | 1016
Reviewing the Congured Sengs | 1018
Deploying the New Service | 1018
Creang a Service Order for VPLS Access into Layer 3 Networks | 1019
Creang an E-LAN Service Order with CFM | 1022
Interconnecng an E-LAN Service with an IP Service | 1024
Service Provisioning: Managing IP Service Orders | 1027
Stching a Pseudowire to an IP Service | 1027
Creang a Full Mesh IP Service Order | 1029
Selecng the Service Denion | 1030
Conguring Service Parameters Informaon | 1031
Specifying General Sengs | 1031
Specifying PE-CE Sengs Informaon | 1036
Selecng N-PE Devices or Nodes | 1037
Seng Aributes for Endpoints or Nodes | 1038
Adding and Deleng UNI Interfaces | 1045
Seng Aributes for UNIs or Sites | 1045
Specifying QoS Sengs | 1054
Specifying Template Sengs | 1055
Reviewing the Congured Sengs | 1056
Deploying the New Service | 1056
Creang a Hub-and-Spoke IP Service Order | 1057
Selecng the Service Denion | 1058
xx
/