Falcon EVO 4G: Enjoy seamless internet connectivity in your motorhome or caravan with 4G technology. This compact and powerful router boasts wideband antenna coverage for 3G and 4G frequencies, ensuring a stable connection. With data rates up to 150Mbps, you can effortlessly stream, browse, and stay connected on the go.
Falcon EVO 4G: Enjoy seamless internet connectivity in your motorhome or caravan with 4G technology. This compact and powerful router boasts wideband antenna coverage for 3G and 4G frequencies, ensuring a stable connection. With data rates up to 150Mbps, you can effortlessly stream, browse, and stay connected on the go.
User Manual
FALCON EVO 4FALCON EVO 4G G
Internet Technology for Motorhomes and CaravansInternet Technology for Motorhomes and Caravans
Online Manual
ANTENNA SPECIFICATIONS
Wideband antenna: 3G & 4G
Frequencies: 698-960 / 1710-2700
Radiation: Omni-directional
Ground plane: Independent
Height: 42mm (2.8”)
Diameter: 190mm (7.5”)
Peak Gain: (Isotropic) 698-960MHz: 2.3dBi, 1710-2700MHz: 5dBi
Integrated cable: 60cm 4G
IP66: Water and dust proof
Antenna Gain: 2.4GHz - Internal, 2 x 2, build-in 5dBi
LTE Antenna: 2 x External 5 dBi omnidirectional Antenna, SMA type
Data Rate: 2.4GHz - 3GPP R9 Cat. 4, Downlink/Uplink up to
150Mbps/50Mbps
LAN: 2x 10/100
WAN: 10/100
Max. Power Consumption: 8.5W
Operating System Compatibility: Windows/iOS/Android
Operating Temperature: -10°C to 55°C
Storage Temperature: -14°C to 80°C
Power Input: DC 12v 1A & DC 24v 5A
SIM Slot: 4G
Support PoE: 24V/0.5A
Dimensions: 78 x 42 x 313 (including antenna’s)
Dimensions: 78 x 42 x 154 (excluding antenna’s)
Weight: 180g
Weight: 400g (Boxed)
Hardware Reset Button: Reboot device
ROUTER SPECIFICATIONS
Connection Descriptions:
Connector Description
DC IN DC 12V 1.0 A Power adaptor
LAN 2x 10/100M
WAN 1x 10/100M
Sim Card 4G
Reset Hard reset of router.
Congratulations on the purchase of your new
Falcon EVO 4G & 150 4G router solution
Please note it is important for you to retain your receipt for
proof of purchase for help and assistance.
This guide will take you through the process of installation and
set up.
Please read the manual carefully.
If further support is required please contact us
United Kingdom enquiries
Website: www.falcontechnology.co.uk
Support Email: support@falcontechnology.co.uk
Sales Number: +44 1928 759 239
Connection Descriptions:
1. Gift Box 2. Antenna Base
Section
3. 4G Router
4. 12v Router power
connector
5. Router xing plate
sticker
6. Router xing screws
x 2
7. In-line Fuse holder +
5 amp fuse
8. Adhesive 9. User Manual
PACKAGE CONTENTS
1. Gift box
2. Antenna (including thread, washer, nut, 3m base pad and
SMA cables)
3. 4G 150Mbps Router
4. Bare wire to 12V power connector cable for router
5. Fixing plate template sticker
6. Router xing screws
7. inline fuse holder including 5 amp fuse
8. Adhesive
9. User manual
POSITIONING AND MOUNTING THE ANTENNA
Find a suitable position on the roof of your vehicle. Please ensure
that you have selected the correct position suitable for hole into
the interior of the vehicle and that it is suitable for a cable entry and
is clear of any obstructions. Cabinets and cupboards are usually a
preference to ensure a tidy installation. Also ensure that if it will be
mounted near any other antennas on the roof to give a reasonable
distance between them to avoid any interference.
Requirements:
1. Drill
2. Pilot Drill-bit 2 - 3mm (for the antenna base screws)
3. Hole Cutter / Arbor - 20mm ( For the central cable entry hole)
4. Sealant
5. Pencil
6. Masking Tape
7. Ladder
Prepare and drill hole:
Once the position has been decided within the vehicle for the router
to be placed, check the roof area above to ensure it is clear of any
obstructions or cabling. Drill a pilot hole from the inside of your
vehicle up through the roof, check that the hole created is correct on
the roof of the vehicle. Then use a 20mm hole cutter to and cut from
the inside of the vehicle to just about break the surface of the roof
panel. Then move to the roof of the vehicle and drill downwards to
complete a clean cut.
Remove any swarf and clean around the hole thoroughly so the
antenna and the adhesive can bond correctly with the surface. If the
surface area is metal apply some petroleum jelly or paint around the
hole to prevent corrosion.
SET UP AND FIXING THE ANTENNA
Clean the roof area around the install thoroughly ready for the
antenna to ensure a secure bond. Remove the nut, washer and the
3M backing from the antenna and feed the two SMA cables down the
prepared hole.
Apply a generous amount of adhesive around the neck of the thread
and feed the two cables followed by the thread down the prepared
hole. Press down evenly and apply pressure to ensure a good grip
with the 3M pad.
Enter the vehicle and feed the washer and nut over the cables and up
onto the 20mm thread and tighten (hand tight should be sucient).
Once the antenna is installed in place, apply a bead of sealant around
the base of the exterior of the antenna to further waterproof the
installation.
ROUTER INSTALLATION PROCESS
Step 1:
Measure the space to see if your router
will t vertically or horizontally. Attach
the provided “xing sticker” to the
surface you want to mount the router
to.
Step 2:
Screw the self-tapping screws into
the sticker with the circle marked “X”.
Remove the sticker once you have
tested the router ts perfectly.
Step 3:
A) Insert the sim-card.
B) Connect the 12v power supply to the
router.
*Sim-card not included
A
B
Step 4:
A) Connect the optional fuse holder
cable to the power cable by means of
crimping. *Crimping tools not included.
B) Connect the black cable to a negative
and red to a positive 12v power source
/ battery.
C) Insert the provided fuse.
Step 5:
Mount the router to the self tapping
screws.
A) Finally connect the two SMA cables
from the antenna and to the SMA
connectors on the router.
A
ROUTER QUICK SETUP GUIDE
Step 1: Insert your sim-card (Requires preloaded data from your
provider).
Step 2: Plug the router into a power source.
Step 3: Use your mobile phone, tablet, or computer to search and
connect to the network “Falcon4G”:
Step 4: Enter Password: F@1con_99
Step 5: Conrm signal by checking the 2 green lights the side of the
router. 1 red light indicates power.
Step 6: If you are connected without internet see the next page on
how to manually set up your Access Point Network (APN).
Step 7: Enjoy your internet experience.
Popular Internet Service Provider (ISP) Details:
At the time of printing all details are correct but for any discrepancies
please check with your provider.
Access Point Name (APN)
D1
Username
D2
Password
D3
everywhere eesecure secure
giga.com gg p
mobile.o2.co.uk o2web password
mobile.sky
three.co.uk
pp.vodafone.co.uk wap wap
wap.vodafone.co.uk wap wap
talkmobile.co.uk wap wap
goto.virginmobile.uk
prepay.tesco-mobile.com tescowap password
mob.asm.net
uk.lebara.mobi wap wap
Provider
EE
giga
O2
Sky Mobile
Three
Vodafone PAYG
Vodafone
Talkmobile
Virgin Mobile
Tesco Mobile
Smarty
Lebara Internet
Popular Internet Service Provider (ISP) Details:
Step 1: Type the following into your web browser: 192.168.1.254
Step 2: Type the password: F@1con_admin_99
Step 3: Manually setup your “APN” details:
A - Click on “General Settings” located on the blue menu bar
B - Ensure that “4G” is enabled and highlighted “blue”
C - Change the “APN Prole” from “auto” to “manual”
D - Type the Access Point Network (APN) details. Example “EE”
D1 - APN: everywhere
D2 - Username: eesecure
D3 - Password: secure
D4 - Authentication type: “PAP”
D5 - PDP Type: “IPv4/IPv6”
Click save to apply changes. Example used is “EE” with reference steps
below:
FAQ’S
Q: Connected, without internet access
A: Ensure you have loaded data onto your sim-card. Contact your
provider to ensure you have data available. If you continue to
experience this issue you will need to manually change your Access
Point Network (APN) details. Please refer to the Quick Router Setup
Guide section
Q: The router does not power on.
A: Ensure the power is turned on at the source. Check the power
connector is secured at the base of the router. Check the in line fuse
has not blown.
Q: Cannot nd “Falcon4G” wi network.
A: Ensure the router is turned on and in range. Turn the router o for
+-60 seconds and then turn it back on. You can do this by unpluging
the power. Do not “reset” at this point. Ensure the device wi is
switched on. Remove the fuse and then resetting the fuse back in.
LAN Reset Power
SIM
SIM slot requires a standard sim
card or adaptor for micro or nano
sim cards.
ROUTER INPUTS
Q: I have changed the password and forgotten it.
A: The router needs to be reset.
- Press the reset button (using a pen or pin for 5 seconds) located
next to the power input.
- The router will display a red light for 60 seconds before a solid green
light appears.
- Search for a Falcon4G and type in password “F@1con_99”
Q: Can the wireless name of the router be customized?
A: The wireless name can be customized under “General Settings” ibn
the admin portal.
Q: How do you install the simcard?
A: Ensure you have a sim adaptor if you are using a micro or nano sim
card. Follow the image under the sim slot of the router. Once the sim
is secure you will hear a click.
Q: Which SIM provider can be used for the 4G Combo?
A: The router is unlocked to all networks and so can be used with any
sim provider you choose. For some networks the APN may not be
automatically recognised and you may need to manually input the
APN for the service provider. There is a list of some of the popular
networks on page - however you can easily obtain any providers APN
settings by simply searching on the internet for the provider name
and APN settings.
You will require these details:
APN NAME: ( Such as EE )
APN: for example for EE is ( everywhere )
USERNAME: for example for EE is ( eesecure )
PASSWORD: for example for EE is ( eesecure )
AUTHENTICATION TYPE: for example for EE is ( PAP )
PDP TYPE: for example for EE is ( IPv4/IPv6)
For further technical assistance you can contact us via email at:
support@falcontechnology.co.uk
Falcon Portable Folding solar panels for
Motorhomes, Caravans & Campervans
Falcon range of Multi-Voltage LED Camping TV’s
for Motorhomes and Caravans.
12W Solar battery maintainer / trickle charger
for Motorhomes, Caravans, Campervans, cars
& boats
For the full product range please visit
the Falcon Technology website.
OTHER FALCON PRODUCTS
Website: www.falcontechnology.co.uk
Support Email: support@falcontechnology.co.uk
Sales Number: +44 1928 759 239
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Falcon EVO 4G: Enjoy seamless internet connectivity in your motorhome or caravan with 4G technology. This compact and powerful router boasts wideband antenna coverage for 3G and 4G frequencies, ensuring a stable connection. With data rates up to 150Mbps, you can effortlessly stream, browse, and stay connected on the go.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SIRETTA QUARTZ-ONYX 5G NR User manual
-
Bosch HTS 62 User manual
-
Hughes RF-7800B-DUO24 User guide
-
Sierra Wireless MP 880W User manual
-
Sierra Wireless MP 875 User manual
-
Winegard Converge Owner's manual
-
Maestro 3G Industrial Router User manual
-
Cradlepoint AER 2100 Quick start guide
-
Winegard Gateway GW-1000 User manual
-