2-Seater Bench
Assembly & Care Instructions
SKU: 9023340
Model #: FRN-802180
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
DO NOT RETURN TO STORE
For outdoor domestic use only. Not for commercial use.
Designed in USA
Made in Vietnam
For assistance with assembly, parts, or customer service, please contact:
2
Contents
Package Contents ............................ 2
Preparation ................................. 2
Hardware Contents ........................... 3
Assembly . . .............................. . .3-4
Warranty ................................... 5
Care and Maintenance ......................... 5
Warnings and Cautions ........................ 5
Package Contents
Part Description Quantity
A Armrest 2
BBack Panel 1
CSeat Panel 1
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions at [email protected] or chat with
Estimated Assembly Time: 30 minutes
Tools required for Assembly: No tools required
A B C
https://help.atleisure.com.
3
Hardware Contents
Part Description Quantity
1 7 x 60 mm Screw 8
2 8 x 70 mm Screw 8
3 Sleeve Nut 8
4 Washer 4
5 Wrench 2
1
5
2 3 4
Assembly
Attaching the Back Panel to the Seat Panel
Connect back panel (B) to the seat panel (C) with the screws M7 x 60 (1) and
tighten with the allen wrench (5).
1IMPORTANT: Do not fully tighten bolts/screws until
all pieces are loosely assembled.
C
B
1
1
4
Assembly (continued)
Attaching the Armrest to the Seat Panel and
Back Panel
2
Connect armrest (A) to the seat panel (C) with the screws M7 x 60 (1). Connect the
armrest (A) to the back panel (B) with bolt (2) and the washer (4) and the sleeve
nut (3). Tighten with the allen wrench (5).
Positioning the Bench
3
A
A
1
2
3
4
2
4
3
5
Warranty
ONE YEAR WARRANTY
This product is covered under a manufacturer’s one year warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at [email protected] or chat with us at
https://help.atleisure.com.
NOT COVERED UNDER WARRANTY
This Warranty excludes the following: general frame rusting; glass breakage; acts of
nature (i.e. wind, fire, or freeze); damage caused by improper assembly, accident,
disaster, misuse, abuse, negligence and commercial use; discoloration or fading of
the finish or fabric as a result of exposure to the elements.
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your in-
formation to send to ATLeisure at customerser[email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Care and Maintenance
• Use mild soap and warm water to clean the frames.
• Rinse with clean water and dry thoroughly.
• Be sure to drain any water accumulated inside the frames. To thoroughly
drain frames, remove foot caps and tilt frames, if necessary, to remove all
water. Water allowed to accumulate inside the frames and then exposed to
sub-freezing temperatures can cause damage to frame tubing. Such damage is
not covered under warranty.
• Any rust spots should be lightly sanded and treated with rust inhibitor and
followed with an application of touch-up paint (not included).
Warnings and Cautions
DANGER: Keep children out of the assembly area during
assembly.
WARNING: Do not stand on bench.
CAUTION: Use bench on at ground only.
6
ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service is available by email at
[email protected] or chat at http://help.atleisure.com
8 AM – 5 PM EST, Monday – Friday.
/
