2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Peerless
  6. DS334

Peerless DS334 Installation guide

  • Hello! I've reviewed the provided installation guide for the Peerless PC Mount Bracket DS334. This document contains detailed instructions for assembling the bracket, including the use of different types of screws, a security allen wrench, and a penta-pin tool. I am ready to answer your questions about the device, its installation and assembly.
  • What is included in the parts list?
    What size is the security allen wrench?
    How many rubber pads are included?
ISSUED: 03-05-09 SHEET #: 125-9049-1
1 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
Model: DS334
Installation and Assembly - Plasma PC Mount Bracket
Qty. Part #
Description
Amount adapter 1 201-1196
Bmount attachment bracket 1 201-1198
Cclamp bracket 2 201-1199
DM5 x 10 mm socket pin serrated washer head screw 8 510-1126
EM6 x 10 mm socket pin serrated washer head screw 4 510-1066
FM10 x 15 mm penta-pin screw 8 520-9263
G4 mm security allen wrench 1 560-9646
Hpenta-pin tool 1 520-9260
Irubber pad (not shown) 12 590-1159
Parts List
Before you start check the parts list to insure all of the parts shown are included.
Note: Read instruction sheet before you start installation and assembly.
D E F
G
H
AB
C
ISSUED: 03-05-09 SHEET #: 125-9049-12 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
See accompanying adapter plate instruction sheet to attach adapter plate to screen. Attach mount adapter (A) to
adapter plate with four M10 x 15 mm penta-pin screws (F).
1
Attach two clamp brackets (C) to mount attachment bracket (B) using four M5 x 10 mm socket pin serrated washer
head screws (D). Leave M5 x 10 mm socket pin serrated washer head screws (D) loose. Place four rubber pads (I)
on clamp brackets (C) as shown.
2
B
C
D
F
A
GENERIC
ADAPTER
PLATE
I
ISSUED: 03-05-09 SHEET #: 125-9049-1
3 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
Attach eight rubber pads (I) to computer. Each pad should be approximately 5.13 in (130 mm) away from center of
computer as shown below.
I
Place computer between clamping brackets (C). Attach mount adapter (A) to mount attachment bracket (B) using
four M6 x 10 mm socket pin serrated washer head screws (E). Tighten all fasteners.
3
4
COMPUTER
COMPUTER
A
E
B
5.13 in
(130 mm)
C
ISSUED: 03-05-09 SHEET #: 125-9049-14 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
Attach mount to mount attachment bracket (B) using four M10 x 15 mm penta-pin screws (F) or four M5 x 10 mm
socket pin serrated washer head screws (D) as shown below.
5
© 2009 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
B
F or D
GENERIC
MOUNT
/