USTELLAR LED Flood Light 150W/200W Owner's manual
- Type
- Owner's manual
LED Flood Light User Guide
Thank you for ordering from Ustellar. Set-up is easy and takes only a few
minutes by following the instruc�ons.
5000K
No
120V AC
50/60Hz
IP66
120°
-20°C-40°C
Model
Max Luminous Flux
Color Temperature
Dimmable
Frequency
UT888615
150W
13500lm
UT888620
200W
18000lm
1
1. Parameters
(1) Please check if the light and the parts are intact before installa�on.
(2) Make sure to cut off power before installa�on.
(3) Please do not place this light in corrosive condi�ons.
(4) If there is any damage to the cord, please cut off the power and stop
using it immediately.
(5) Please do not retrofit the light within the warranty period.
(6) To ensure the light works properly, please use the voltage indicated on
the packing.
English
2
Heatsink
Lock screw
Bracket
2. Components
LL—Black
G—Green
N—White
Warning: if the ligh�ng for outdoor use, waterproof treatment should be done
at the joints.
N
English
LED light source
Reflector
Tempered glass lid
18AWG 3×0.824mm²
3
3. Dimension
English
Model: UT888620
Wa�age: 200W
Weight: 4.85lb/2.2kg
Max Projected Area: 130㎡
38.5cm/15in 3.5cm/1.4in
26.5cm/10.5in
Model: UT888615
Wa�age: 150W
Weight: 4lb/1.8kg
Max Projected Area: 100㎡
32.5cm/12.8in 3.5cm/1.4in
22cm/8.7in
Step A: According to the spacing of two screw bits on the bracket, drill two
holes on the moun�ng panel.
4
Step B: Aim the bracket at the holes and fix it with two bolts.
Step C: Adjust the ligh�ng direc�on up or down as per your need and plug
in to power the light on.
English
C
B
Note: Maximum moun�ng height is over 5m.
A
01 Make sure that the distance between the light and the object being lits is
more than 1 meter, so as to avoid high temperature caused by short distance.
(1) This light is waterproof and damp proof. It is protected against the rain,
but it cannot be immersed in water.
(2) The moun�ng posi�on of this light should be able to bear at least 10 �mes
as heavy as the light.
(3) This light should be used in condi�on that is good for heat dissipa�on. Its
working temperature should be less than 45°C Too high the working
temperature will cause serious lumen depression and affect lifespan of the
light.
Note:
01
5
English
6
www.ustellar.com support@ustellar.com
Contact Us
Have some issue? No worries! Please reach us via these channels.
Our customer services team is more than happy to help.
Manufacturer: Shenzhen Ustellar Technology Ltd.
(shen zhen shi you shi tuo ke ji you xian gong si )
Address: 308A, 3/F, Building A, Youth Entrepreneur Hub, Jianshe East
Road, Qinghua Community, Longhua Street, Longhua District,
Shenzhen, CHINA 518000
English
Step 1: Scan the QR code
Step 2: Click E-manual PDF file
Step 3: Read file online or download
Go paper-free, make life easier, and do something good for the environment.
E-manual
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
USTELLAR LED Flood Light 150W/200W Owner's manual
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
NOVOSTELLA NTS22A-RGB-US-NF User guide
-
resideo VX1 Installation guide
-
NOVOSTELLA NTA13 User guide
-
JADEMAR LIGHTING PFL-G2 User manual
-
NOVOSTELLA NTS102-RGB LED Light Strip User guide
-
Premier MAMBA Assembly Manual
-
JADEMAR JSLCT-SOL Series User manual
-
NOVOSTELLA NTS-RF01 User guide
-
Stonco / Keene Slim Flood LED dual select Install Instructions
-
Parrot Uncle F8265110V Installation guide
