ViSAGE RSM-651 User manual
- Category
- Hair trimmers & clippers
- Type
- User manual
INSTRUCTION MANUAL
Model Number RSM-651
Men's Multipurpose Shaver
After Sales Support
Telephone: 1300 886 649
1
After Sales Support
Telephone: 1300 886 649
Contents
02 Warranty
03 Welcome
04 General Safety Instructions
06 Parts List
07 Getting Started
08 Instructions
11 Other Useful Information
2
After Sales Support
Telephone: 1300 886 649
Men's Multipurpose Shaver
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts
for a period of 36 months from date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, refunded or
replaced at our discretion, solely at our option with no charge for parts and
labour. The benefits conferred by this warranty are in addition to all rights
and remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory laws.
3
After Sales Support
Telephone: 1300 886 649
Welcome
Congratulations on choosing to buy a Visage Technique
®
product.
All products brought to you by VisageTechnique
®
are manufactured to the
highest standards of performance and safety and, as part of our philosophy of
customer service and satisfaction, are backed by our comprehensive 3 Year
Warranty. We hope you will enjoy using your purchase for many years to come.
4
After Sales Support
Telephone: 1300 886 649
General Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to. Keep the manual in a safe
place for future reference, along with the completed warranty card, purchase
receipt and carton. If applicable, pass these instructions on to the next owner of
the appliance.
• Only use the included power adaptor to charge the shaver. It contains a
transformer to transform 220-240VAC to a safe low voltage (3.2V DC
150mA). Do not cut off the power adaptor and replace it with another.
• Do not use the shaver if the power adaptor or its cord or plug is damaged,
if it is not working properly, if it has been dropped or damaged, or if it has
been dropped into water. Contact our after sales support line for advice. A
damaged unit must be replaced with a new one with the original type voltage
to avoid damaging the shaver.
• Do not use an extension cord or a voltage converter with this appliance.
• Do not wrap the cord around the appliance.
• Do not store the charging base and power adaptor in temperatures below
5˚C or above 35˚C. Always store it in an area free of moisture.
• Make sure the charging base and power adaptor do not come into contact
with any liquid, especially when connected to the power outlet.
• Keep the power adaptor and cord away from heated surfaces.
• Make sure the shaver and its attachments cannot fall into water at any time.
• Never drop or insert any object into any opening in the appliance.
• Make sure the cord of the power adaptor is disconnected from the charging
base when storing the appliance.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the
appliance. Close supervision is necessary when any appliance is used by or
near children.
5
After Sales Support
Telephone: 1300 886 649
• Do not use the appliance outdoors.
• Do not use the appliance where aerosol (spray) products are being used, or
where oxygen is being administered.
• Do not use this appliance if the shaver body or any attachment is damaged
or broken as this could cause injury.
• Always make sure the blades are aligned properly.
• The shaver blade is made of a superthin alloy. To avoid breakage, do no
press it by hand.
• If your shaver is not working after you switch it on, make sure that it is fully
charged and clean inside the shaver head.
• To protect the shaver head, make sure to cover it with the protective cover
when travelling.
• Take care when cleaning the shaver with hot water to avoid scalding.
• The waterproof grade of the shaver is IPX4, which means it is protected
against splashing water.
General Safety Instructions (Cont.)
WARNING!
Make sure to unplug the power adaptor and detach the shaver from the
charging base and supply cord before cleaning the shaver under running water.
Only the shaver head can be washed under running water.
Do not soak the shaver body in water.
6
After Sales Support
Telephone: 1300 886 649
Parts List
5
6
2
1
7
8
9
10
11
12
4
1. Shaver body
2. Sideburn trimmer
(at the back of the shaver)
3. Shaver head
4. Nose hair/ear hair trimmer head
5. Hair clipper head
6. Hair clipper comb attachment
(reversible, 3mm and 6mm)
7. Comb
8. Accessories bag
9. Charging base (in two parts)
10. Power adaptor (AC/DC)
11. Lubricating oil
12. Cleaning brush
3
7
After Sales Support
Telephone: 1300 886 649
• Charge the unit for approximately 16 hours for optimal performance. You
can either charge it directly or while it is sitting on the charging base. To
assemble the charging base, push the holding frame into place on the base.
• Insert the power adaptor cord into the back of the charging base (it will
only fit one way), then plug the adaptor into a suitable electrical outlet
and switch on the power at the power point.
• Place the shaver onto the charging base, making sure the contacts are
properly aligned. The charge indicator will light up red while charging.
• After a full charge, take the shaver off the base and unplug the base.
• You can also charge the shaver directly, without the charging base.
Simply plug the adaptor cord straight into the bottom of the shaver and
plug the adaptor into a suitable power point. The charge indicator will
light up red while charging.
Notes
• Place the charging base on a flat, stable surface during charging where it
cannot tip over.
• Make sure the shaver is off before charging it.
• A full charge takes approximately 16 hours.
• Approximate usage time after a full battery charge is 30 minutes.
• We recommend you do not leave the shaver on the charging base
connected to power for more than 24 hours. It can be damaged if used
with an alternating current.
Charging your multifunction shaver
Getting Started
Before first use
• Remove all packaging materials from the appliance and dispose of them
responsibly. Plastic wrapping can be a suffocation hazard for babies and
young children, so ensure all packaging materials are out of their reach.
• Inspect the power adaptor and cord for damage. Do not use the appliance if
the adaptor or its cord have been damaged or are not working properly.
8
After Sales Support
Telephone: 1300 886 649
Instructions
Shaving
• Press the ON/OFF button to start the shaver.
• Move the shaver head quickly on your skin in straight
lines and circles (Fig. 1).
• Cover the shaver head with the protective cover after
each use to avoid damaging it (Fig. 2).
Trimming sideburns and moustache
• Use the sideburn trimmer at the back of the shaver for
trimming sideburns and moustache.
• To open the trimmer, push upwards at the back of the
shaver, as illustrated on the right. Then press the
ON/OFF button to start trimming (Fig. 3).
Removing the shaver head
• Make sure the shaver is disconnected from the power
adaptor before removing the shaver head. Simply pull
it off the shaver body, as illustrated (Fig. 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
9
After Sales Support
Telephone: 1300 886 649
Instructions (Cont.)
Clipping hair
• Before clipping hair, make sure the hair is clean, dry and
product-free. Do not use the hair clipper on wet hair.
• Comb your hair in growth direction before clipping it.
• Align the hair clipper nozzle on top of the shaver, then press
down the hair clipper head firmly until you hear it click into
place (Fig. 5).
• Put the hair clipper comb into the slots on both sides of
the clipper head. Make sure both sides of the comb are
firmly attached to the hair clipper head (Fig. 6).
• The reversible hair clipper comb can be used for clipping
hair down to two different lengths (3mm or 6mm). Attach it
onto the hair clipper head in the direction of your desired
hair length, as marked on the underside (Fig. 7).
• To remove the hair clipper comb, gently pull off one side,
then the other (Fig. 8).
• Press the ON/OFF button to start clipping your hair.
Starting at the back of your head, move upwards towards
the crown. Continue working around the sides of your head
and then finish off with the top of your head. Trim around
the neck and behind the ears.
• For a good clipping effect, move the clipper against your
hair growth direction.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
10
After Sales Support
Telephone: 1300 886 649
Trimming nose hair
• Clean your nose before use.
• Align the nose hair trimmer nozzle on top of the shaver, then
press down the nose hair/ear hair trimmer head firmly until
you hear it click into place (Fig. 9).
• Carefully insert the nose hair trimmer into each nostril,
no more than 5mm deep.
• Press the ON/OFF button to start trimming your nose
hair (Fig. 10). Rotate the trimmer in a circular motion while
gently moving in and out of the nose.
Trimming ear hair
• Clean your ears with cotton buds before use.
• Press the ON/OFF button and slowly move the trimmer
tip towards your ear to clip your ear hair (Fig. 11).
CAUTION: Do not insert the trimmer tip more than 5mm
into the ear canal.
• Rotate the trimmer in a circular motion while gently moving
in and out of the ear canal.
Instructions (Cont.)
Fig. 9
Fig. 10
Fig. 11
11
After Sales Support
Telephone: 1300 886 649
Other Useful Information
Cleaning and maintenance
Shaver: clean the shaver regularly to ensure a consistently
good shaving effect.
• Pull away (open) the four shaver heads one by one (Fig. 12),
then rotate the middle head in a counterclockwise direction
and pull it out (Fig. 13).
• Clean the five shaver heads for a few minutes under
warm running water (Fig. 14).
• Close the shaver head part and shake off any excess water.
• Open the shaver head part again and leave it open to air-
dry completely (Fig. 15).
NOTE: Do not wipe the shaver head part with a towel or paper
tissues as this may damage the shaver head.
NOTE: Use the supplied brush to remove hair from underneath
the shaver heads. Do not use water for this.
Trimmer: clean the sideburn trimmer after every use.
• Clean the trimmer with the supplied cleaning brush (Fig. 16).
• Lubricate the trimmer teeth with a drop of the supplied
lubricating oil once every six months (Fig. 17).
WARNING!
Before cleaning any parts of the multifunction shaver, make sure the shaver
is disconnected from the power adaptor/charging base.
Fig. 12
Fig. 13
Fig. 15
Fig. 16
Fig. 17
Fig. 14
12
After Sales Support
Telephone: 1300 886 649
Hair clipper: clean the clipper after every use.
• Pull the hair clipper head off the shaver body, then either clean the clipper
dry with the supplied cleaning brush, or wash it under running water.
• Do not use abrasive cleansers or cleansers containing alcohol, petrol or
acetone to clean the hair clipper head or comb.
• To maintain best clipping results, add a few drops of the
supplied lubricating oil (or another light grade lubricating oil
such as sewing machine oil) every three months. Holding the
hair clipper head, pull back and remove the cutting assembly
and add 1 - 2 drops of oil inside. Also wipe a drop over the
cutters with your fingertip. Wipe away any excess before
reassembling the hair clipper head (Fig. 18).
Other Useful Information (Cont.)
Changing the shaver head
To maintain the best shaving effect from your Multifunction
Shaver, we recommend changing the shaver head once a year.
The shaver has a long service life, if not damaged. A damaged
or abraded shaver head can only be replaced with the same
brand of shaver head. Contact our after sales support line for
spare parts.
• To replace the shaver head, pull the old shaver head
assembly out of the shaver (Fig. 19).
• Align the nozzle of the new shaver head assembly (1) on
top of the shaver (2), then press down the shaver head
assembly firmly until you hear it click into place (Fig. 20).
Fig. 18
Fig. 19
Fig. 20
13
After Sales Support
Telephone: 1300 886 649
Other Useful Information (Cont.)
At the end of its working life, do not throw this appliance out with your household
rubbish. Electrical, electronic and battery-operated products contain substances
that can have a detrimental effect on the environment and human health if
disposed of inappropriately. Observe any local regulations regarding the disposal
of electrical consumer goods and dispose of it appropriately for recycling.
Contact your local authorities for advice on recycling facilities in your area.
Responsible disposal
14
After Sales Support
Telephone: 1300 886 649
(This page has been left blank intentionally.)
After Sales Support
Telephone: 1300 886 649
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
ViSAGE RSM-651 User manual
- Category
- Hair trimmers & clippers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
PureSilk CPF1-6001-PRW Operating instructions
-
Kmart 43296590 User manual
-
Philips G290 User manual
-
Philips G370/60 User manual
-
Braun 5780 User manual
-
LIVING CO CL-RSCX671 User manual
-
Protocol 4082-5 7PC Grooming Set User manual
-
United HCM-7236 Operating instructions
-
Philips G390 User manual
-
