ViSAGE RSM-651 User manual

Brand: ViSAGE

Model: RSM-651

Category: Hair trimmers & clippers

Type: User manual

INSTRUCTION MANUAL

Model Number RSM-651

Men's Multipurpose Shaver

After Sales Support

Telephone: 1300 886 649

After Sales Support

Telephone: 1300 886 649

Contents

02 Warranty

03 Welcome

04 General Safety Instructions

06 Parts List

07 Getting Started

08 Instructions

11 Other Useful Information

After Sales Support

Telephone: 1300 886 649

Men's Multipurpose Shaver

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts

for a period of 36 months from date of purchase. Defects that occur within

this warranty period, under normal use and care, will be repaired, refunded or

replaced at our discretion, solely at our option with no charge for parts and

labour. The benefits conferred by this warranty are in addition to all rights

and remedies in respect of the product that the consumer has under the

Competition and Consumer Act 2010 and similar state and territory laws.

After Sales Support

Telephone: 1300 886 649

Welcome

Congratulations on choosing to buy a Visage Technique

product.

All products brought to you by VisageTechnique

are manufactured to the

highest standards of performance and safety and, as part of our philosophy of

customer service and satisfaction, are backed by our comprehensive 3 Year

Warranty. We hope you will enjoy using your purchase for many years to come.

After Sales Support

Telephone: 1300 886 649

General Safety Instructions

Read this manual thoroughly before first use, even if you are familiar with this

type of product. The safety precautions enclosed herein reduce the risk of fire,

electric shock and injury when correctly adhered to. Keep the manual in a safe

place for future reference, along with the completed warranty card, purchase

receipt and carton. If applicable, pass these instructions on to the next owner of

the appliance.

• Only use the included power adaptor to charge the shaver. It contains a

transformer to transform 220-240VAC to a safe low voltage (3.2V DC

150mA). Do not cut off the power adaptor and replace it with another.

• Do not use the shaver if the power adaptor or its cord or plug is damaged,

if it is not working properly, if it has been dropped or damaged, or if it has

been dropped into water. Contact our after sales support line for advice. A

damaged unit must be replaced with a new one with the original type voltage

to avoid damaging the shaver.

• Do not use an extension cord or a voltage converter with this appliance.

• Do not wrap the cord around the appliance.

• Do not store the charging base and power adaptor in temperatures below

5˚C or above 35˚C. Always store it in an area free of moisture.

• Make sure the charging base and power adaptor do not come into contact

with any liquid, especially when connected to the power outlet.

• Keep the power adaptor and cord away from heated surfaces.

• Make sure the shaver and its attachments cannot fall into water at any time.

• Never drop or insert any object into any opening in the appliance.

• Make sure the cord of the power adaptor is disconnected from the charging

base when storing the appliance.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Young children should be supervised to ensure they do not play with the

appliance. Close supervision is necessary when any appliance is used by or

near children.

After Sales Support

Telephone: 1300 886 649

• Do not use the appliance outdoors.

• Do not use the appliance where aerosol (spray) products are being used, or

where oxygen is being administered.

• Do not use this appliance if the shaver body or any attachment is damaged

or broken as this could cause injury.

• Always make sure the blades are aligned properly.

• The shaver blade is made of a superthin alloy. To avoid breakage, do no

press it by hand.

• If your shaver is not working after you switch it on, make sure that it is fully

charged and clean inside the shaver head.

• To protect the shaver head, make sure to cover it with the protective cover

when travelling.

• Take care when cleaning the shaver with hot water to avoid scalding.

• The waterproof grade of the shaver is IPX4, which means it is protected

against splashing water.

General Safety Instructions (Cont.)

WARNING!

Make sure to unplug the power adaptor and detach the shaver from the

charging base and supply cord before cleaning the shaver under running water.

Only the shaver head can be washed under running water.

Do not soak the shaver body in water.

After Sales Support

Telephone: 1300 886 649

Parts List

1. Shaver body

2. Sideburn trimmer

(at the back of the shaver)

3. Shaver head

4. Nose hair/ear hair trimmer head

5. Hair clipper head

6. Hair clipper comb attachment

(reversible, 3mm and 6mm)

7. Comb

8. Accessories bag

9. Charging base (in two parts)

10. Power adaptor (AC/DC)

11. Lubricating oil

12. Cleaning brush

After Sales Support

Telephone: 1300 886 649

• Charge the unit for approximately 16 hours for optimal performance. You

can either charge it directly or while it is sitting on the charging base. To

assemble the charging base, push the holding frame into place on the base.

• Insert the power adaptor cord into the back of the charging base (it will

only fit one way), then plug the adaptor into a suitable electrical outlet

and switch on the power at the power point.

• Place the shaver onto the charging base, making sure the contacts are

properly aligned. The charge indicator will light up red while charging.

• After a full charge, take the shaver off the base and unplug the base.

• You can also charge the shaver directly, without the charging base.

Simply plug the adaptor cord straight into the bottom of the shaver and

plug the adaptor into a suitable power point. The charge indicator will

light up red while charging.

Notes

• Place the charging base on a flat, stable surface during charging where it

cannot tip over.

• Make sure the shaver is off before charging it.

• A full charge takes approximately 16 hours.

• Approximate usage time after a full battery charge is 30 minutes.

• We recommend you do not leave the shaver on the charging base

connected to power for more than 24 hours. It can be damaged if used

with an alternating current.

Charging your multifunction shaver

Getting Started

Before first use

• Remove all packaging materials from the appliance and dispose of them

responsibly. Plastic wrapping can be a suffocation hazard for babies and

young children, so ensure all packaging materials are out of their reach.

• Inspect the power adaptor and cord for damage. Do not use the appliance if

the adaptor or its cord have been damaged or are not working properly.

After Sales Support

Telephone: 1300 886 649

Instructions

Shaving

• Press the ON/OFF button to start the shaver.

• Move the shaver head quickly on your skin in straight

lines and circles (Fig. 1).

• Cover the shaver head with the protective cover after

each use to avoid damaging it (Fig. 2).

Trimming sideburns and moustache

• Use the sideburn trimmer at the back of the shaver for

trimming sideburns and moustache.

• To open the trimmer, push upwards at the back of the

shaver, as illustrated on the right. Then press the

ON/OFF button to start trimming (Fig. 3).

Removing the shaver head

• Make sure the shaver is disconnected from the power

adaptor before removing the shaver head. Simply pull

it off the shaver body, as illustrated (Fig. 4).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

After Sales Support

Telephone: 1300 886 649

Instructions (Cont.)

Clipping hair

• Before clipping hair, make sure the hair is clean, dry and

product-free. Do not use the hair clipper on wet hair.

• Comb your hair in growth direction before clipping it.

• Align the hair clipper nozzle on top of the shaver, then press

down the hair clipper head firmly until you hear it click into

place (Fig. 5).

• Put the hair clipper comb into the slots on both sides of

the clipper head. Make sure both sides of the comb are

firmly attached to the hair clipper head (Fig. 6).

• The reversible hair clipper comb can be used for clipping

hair down to two different lengths (3mm or 6mm). Attach it

onto the hair clipper head in the direction of your desired

hair length, as marked on the underside (Fig. 7).

• To remove the hair clipper comb, gently pull off one side,

then the other (Fig. 8).

• Press the ON/OFF button to start clipping your hair.

Starting at the back of your head, move upwards towards

the crown. Continue working around the sides of your head

and then finish off with the top of your head. Trim around

the neck and behind the ears.

• For a good clipping effect, move the clipper against your

hair growth direction.

Fig. 5

Fig. 6

Fig. 7

Fig. 8

After Sales Support

Telephone: 1300 886 649

Trimming nose hair

• Clean your nose before use.

• Align the nose hair trimmer nozzle on top of the shaver, then

press down the nose hair/ear hair trimmer head firmly until

you hear it click into place (Fig. 9).

• Carefully insert the nose hair trimmer into each nostril,

no more than 5mm deep.

• Press the ON/OFF button to start trimming your nose

hair (Fig. 10). Rotate the trimmer in a circular motion while

gently moving in and out of the nose.

Trimming ear hair

• Clean your ears with cotton buds before use.

• Press the ON/OFF button and slowly move the trimmer

tip towards your ear to clip your ear hair (Fig. 11).

CAUTION: Do not insert the trimmer tip more than 5mm

into the ear canal.

• Rotate the trimmer in a circular motion while gently moving

in and out of the ear canal.

Instructions (Cont.)

Fig. 9

Fig. 10

Fig. 11

After Sales Support

Telephone: 1300 886 649

Other Useful Information

Cleaning and maintenance

Shaver: clean the shaver regularly to ensure a consistently

good shaving effect.

• Pull away (open) the four shaver heads one by one (Fig. 12),

then rotate the middle head in a counterclockwise direction

and pull it out (Fig. 13).

• Clean the five shaver heads for a few minutes under

warm running water (Fig. 14).

• Close the shaver head part and shake off any excess water.

• Open the shaver head part again and leave it open to air-

dry completely (Fig. 15).

NOTE: Do not wipe the shaver head part with a towel or paper

tissues as this may damage the shaver head.

NOTE: Use the supplied brush to remove hair from underneath

the shaver heads. Do not use water for this.

Trimmer: clean the sideburn trimmer after every use.

• Clean the trimmer with the supplied cleaning brush (Fig. 16).

• Lubricate the trimmer teeth with a drop of the supplied

lubricating oil once every six months (Fig. 17).

WARNING!

Before cleaning any parts of the multifunction shaver, make sure the shaver

is disconnected from the power adaptor/charging base.

Fig. 12

Fig. 13

Fig. 15

Fig. 16

Fig. 17

Fig. 14

After Sales Support

Telephone: 1300 886 649

Hair clipper: clean the clipper after every use.

• Pull the hair clipper head off the shaver body, then either clean the clipper

dry with the supplied cleaning brush, or wash it under running water.

• Do not use abrasive cleansers or cleansers containing alcohol, petrol or

acetone to clean the hair clipper head or comb.

• To maintain best clipping results, add a few drops of the

supplied lubricating oil (or another light grade lubricating oil

such as sewing machine oil) every three months. Holding the

hair clipper head, pull back and remove the cutting assembly

and add 1 - 2 drops of oil inside. Also wipe a drop over the

cutters with your fingertip. Wipe away any excess before

reassembling the hair clipper head (Fig. 18).

Other Useful Information (Cont.)

Changing the shaver head

To maintain the best shaving effect from your Multifunction

Shaver, we recommend changing the shaver head once a year.

The shaver has a long service life, if not damaged. A damaged

or abraded shaver head can only be replaced with the same

brand of shaver head. Contact our after sales support line for

spare parts.

• To replace the shaver head, pull the old shaver head

assembly out of the shaver (Fig. 19).

• Align the nozzle of the new shaver head assembly (1) on

top of the shaver (2), then press down the shaver head

assembly firmly until you hear it click into place (Fig. 20).

Fig. 18

Fig. 19

Fig. 20

After Sales Support

Telephone: 1300 886 649

Other Useful Information (Cont.)

At the end of its working life, do not throw this appliance out with your household

rubbish. Electrical, electronic and battery-operated products contain substances

that can have a detrimental effect on the environment and human health if

disposed of inappropriately. Observe any local regulations regarding the disposal

of electrical consumer goods and dispose of it appropriately for recycling.

Contact your local authorities for advice on recycling facilities in your area.

Responsible disposal

After Sales Support

Telephone: 1300 886 649

(This page has been left blank intentionally.)

After Sales Support

Telephone: 1300 886 649

ViSAGE RSM-651 User manual

Brand: ViSAGE

Model: RSM-651

Category: Hair trimmers & clippers

Type: User manual

Download PDF

report

ViSAGE RSM-651 User manual

ViSAGE RSM-651 User manual

Related papers

Other documents