Bort BSM-750U User manual

1

User’s Manual . . . . . . . . . . . . . . . . . 6

Bedienungsanleitung . . . . . . . . . . . . 7

Mode d’emploi . . . . . . . . . . . . . . . . . 8

Instrucciones de servicio . . . . . . . . . 9

Manual de instruções . . . . . . . . . . . 10

Istruzione per l’uso

. . . . . . . . . . . . .11

Gebruiksaanwijzing . . . . . . . . . . . . 12

Bruksanvisning

. . . . . . . . . . . . . . . 13

Käyttöohje. . . . . . . . . . . . . . . . . . . . 14

Bruksanvisning . . . . . . . . . . . . . . . . 15

Brugervejledning. . . . . . . . . . . . . . . 16

Használati utasítás . . . . . . . . . . . . 17

Manual de utilizare

. . . . . . . . . . . . 18

Οδηγίες χρήσεως . . . . . . . . . . . . . . 19

Instruksja obsługi . . . . . . . . . . . . . . 20

Návod k použití. . . . . . . . . . . . . . . . 21

Navodilo za uporabo. . . . . . . . . . . . 22

Uputstvo za korisnike

. . . . . . . . . . 23

Upute za uporabu

. . . . . . . . 24

Kullanım kılavuzu . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . 26

Инструкция по эксплуатации . . . . 27

Інструкція з експлуатації. . . . . . . . 28

Қолданысы бойынша нұсқама

. . 29

Instrukcija

. . . . . . . . . . . . . . . . . . . 30

Instrukcija

. . . . . . . . . . . . . . . . . . . 31

Kasutusjuhend

. . . . . . . . . . . . . . . 32

RO

PL

SI

CS

CZ

HR

TR

AE

RU

UA

KZ

LT

LV

EE

GR

HU

DK

NO

FI

SE

NL

PT

ES

FR

DE

GB

IT

BSM-650U-Q

93726898

BOS

Page is loading ...

6

Hammer drill

INTENDED USE

This tool is intended for hammer drilling in brick, concrete

and stone as well as for drilling in wood, metal, ceramic

and plastic. Tools with electronic speed control and left/

right rotation are also suitable for screwdriving and thread

cutting

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch with speed control

2 Switch locking button

3 Wheel for maximum speed control

4 Switch for changing direction of rotation

5 Switch for selecting drilling function

6 Auxiliary handle

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

● Wear ear protectors with hammer drills (exposure to

noise can cause hearing loss)

● Use auxiliary handles supplied with the tool (loss of con-

trol can cause personal injury)

● Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

● Always keep the cord away from moving parts of the

tool

● When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

● Use completely unrolled and safe extension cords with

a capacity of 16 Amps (UK 13 Amps)

● In case of electrical or mechanical malfunction, immedi-

ately switch off the tool and disconnect the plug

● SBM Group can assure ﬂ awless functioning of the tool

only when original accessories are used

● Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

● This tool should not be used by people under the age

of 16 years

● Be careful not to drill or drive into areas where electrical

wires may be contacted

● If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

● Never use tool when cord is damaged; have it replaced

by a qualiﬁ ed person

● Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to a

220V supply)

● If the drill bit becomes unexpectedly jammed (causing

a sudden, dangerous reaction), immediately switch off the

tool

● Be aware of the forces that occur as a result of jamming

(especially when drilling metals); always hold the tool

ﬁ rmly with both hands and take a secure stance

● Always disconnect plug from power source before mak-

ing any adjustment or changing any accessory

● Holding the tool

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let

the tool do the work for you

Your machine is double insulated in accordance

with EN60745; therefore no earthwire is required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please con-

tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of the

packaging materials can be recycled. Take these materi-

als to the appropriate recycling locations. Take your un-

wanted machines to your local SBM Group dealer. Here

they will be disposed of in an environmentally safe way.

English

Page is loading ...

35

Parts List

No. Part name

1 Screw for chuck

2 Drill Chuck

3 Output shaft

4 Stell ballØ4

5 Wool loop

6 Bearing 6001-2Z

7 Retaining ring

8 Gear

9 Washer

10 Circlip

11 Spring

12 Impact block

13 Bearing 608-2Z

14 Segregation

15 Change plate

16 Impact button

17 Sealing washer

18 Rotor

19 Brush holder cover

20 Carbon Brush

21 Brush holder

22 Bearing 607-2Z

23 Bearing sheath

24 Stator

25 Staff guage

26 Bolt M8x90

27 Handle support

28 Handle

29 Left housing

30 L/R button

31 Switch

32 Capacitor

33 Inductance

34 Screw ST4.2x14

35 Cable restraint

36 Cable sleeve

37 Cable

38 Right housing

39 Name plate

41 Screw ST4.2x16

36

GB DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in conformity with the following standards or stand-

ardized documents: GS: EN60745-1:2009, EN60745-2-

1:2003/A12:2009; EMC: EN55014-1:2006, EN55014-2/

A1:2001, EN61000-3-2:2006, EN61000-3-3/A2:2005, in

accordance with the regulations 2006/95/CE,2004/108/

CE,2006/42/CE.

NOISE/VIBRATION Measured in accordance with EN60745

the sound pressure level of this tool is 93,6 dB(A) and the

sound power level is 104,6 dB(A) (standard deviation:

3 dB), and the vibration is 7,568 m/s

2

(hand-arm method).

DE KONFORMITÄTSERKLÄRUNG

Wir erklären in alleiniger Verantwortung, daß dieses

Produkt mit den folgenden Normen oder normativen

Dokumenten übereinstimmt: GS: EN60745-1:2009,

EN60745-2-1:2003/A12:2009; EMC: EN55014-1:2006,

EN55014-2/A1:2001, EN61000-3-2:2006, EN61000-3-

3/A2:2005, gemäß den Bestimmungen der Richtlinien

2006/95/CE,2004/108/CE,2006/42/CE.

GERÄUSCH/VIBRATION Gemessen gemäß EN60745

beträgt der Schalldruckpegel dieses Gerätes 93,6 dB(A)

und der Schalleistungspegel 104,6 dB(A) (Standard- ab-

weichung: 3 dB), und die Vibration 7,568 m/s

2

(Hand-

Arm Methode).

FR DÉCLARATION DE CONFORMITÉ

Nous déclarons sous notre propre responsabilité que ce

produit est en conformité avec les normes ou documents

normalisés suivants: GS: EN60745-1:2009, EN60745-2-

1:2003/A12:2009; EMC: EN55014-1:2006, EN55014-2/

A1:2001, EN61000-3-2:2006, EN61000-3-3/A2:2005,

conforme aux réglementations 2006/95/CE,2004/108/

CE,2006/42/CE.

BRUIT/VIBRATION Mesuré selon EN60745 le niveau de

la pression sonore de cet outil est 93,6 dB(A) et le niveau

de la puissance sonore 104,6 dB(A) (déviation standard:

3 dB), et la vibration 7,568 m/s

2

(méthode main-bras).

ES DECLARACIÓN DE CONFORMIDAD

Declaramos bajo nuestra sola responsabilidad que este

producto está en conformidad con las normas o docu-

mentos normalizados siguientes: GS: EN60745-1:2009,

EN60745-2-1:2003/A12:2009; EMC: EN55014-1:2006,

EN55014-2/A1:2001, EN61000-3-2:2006, EN61000-3-

3/A2:2005, de acuerdo con las regulaciones 2006/95/

CE,2004/108/CE,2006/42/CE.

RUIDOS/VIBRACIONES Medido según EN60745 el ni-

vel de la presión acústica de esta herramienta se eleva a

93,6 dB(A) y el nivel de la potencia acústica 104,6 dB(A)

(desviación estándar: 3 dB), y la vibración a 7,568 m/s

2

(método brazo-mano).

PT DECLARAÇÃO DE CONFIRMIDADE

Declaramos sob nossa exclusiva responsabilidade que

este producto cumpre as seguintes normas ou docu-

mentos normativos: GS: EN60745-1:2009, EN60745-2-

1:2003/A12:2009; EMC: EN55014-1:2006, EN55014-2/

A1:2001, EN61000-3-2:2006, EN61000-3-3/A2:2005,

conforme as disposições das directivas 2006/95/

CE,2004/108/CE,2006/42/CE.

RUlDO/VIBR AÇÕES Medido segundo EN60745 o nível

de pressão acústica desta ferramenta é 93,6 dB(A) e o

nível de potência acústica 104,6 dB(A) (espaço de erro:

3 dB), e a vibração 7,568 m/s

2

(método braço-mão).

IT DICHIARAZIONE DI CONFORMITÀ

Dichiaramo, assumendo la piena responsabilità di tale

dichiarazione, che il prodotto è conforme alle seguenti

normative e ai relativi documenti: GS: EN60745-1:2009,

EN60745-2-1:2003/A12:2009; EMC: EN55014-1:2006,

EN55014-2/A1:2001, EN61000-3-2:2006, EN61000-3-3/

A2:2005, in base alle prescrizioni delle direttive 2006/95/

CE,2004/108/CE,2006/42/CE.

RUMOROSITÀ/VIBRAZIONE Misurato in conformità al

EN60745 il livello di pressione acustica di questo utensile

è 93,6 dB(A) ed il livello di potenza acustica è 104,6 dB(A)

(deviazione standard: 3 dB), e la vibrazione è 7,568 m/s

2

(metodo mano-braccio).

NL CONFORMITEITSVERKLARING

Wij verklaren, dat dit product voldoet aan de volgende nor-

men of normatieve documenten: GS: EN60745-1:2009,

EN60745-2-1:2003/A12:2009; EMC: EN55014-1:2006,

EN55014-2/A1:2001, EN61000-3-2:2006, EN61000-3-3/

A2:2005, overeenkomstig de bepalingen van de richtlij-

nen 2006/95/CE,2004/108/CE,2006/42/CE.

GELUID/VIBRATIE Gemeten volgens EN60745 bedraagt

het geluidsdrukniveau van deze machine 93,6 dB(A) en

het geluidsvermogen-niveau 104,6 dB(A) (standaard de-

viatie: 3 dB), en de vibratie 7,568 m/s

2

(hand-arm me-

thode).

SE KONFORMITETSFÖRKLARING

Vi intygar och ansvarar för, att denna produkt över-

ensstämmer med följande norm och dokument: GS:

EN60745-1:2009, EN60745-2-1:2003/A12:2009; EMC:

EN55014-1:2006, EN55014-2/A1:2001, EN61000-3-

2:2006, EN61000-3-3/A2:2005, enl. bestämmelser och

riktlinjerna 2006/95/CE,2004/108/CE,2006/42/CE.

LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt

EN60745 är på denna maskin 93,6 dB(A) och ljudef-

fektnivån är 104,6 dB(A) (standard deviation: 3 dB), och

vibration är 7,568 m/s

2

(hand-arm metod).

Product managament

V. Nosik

SBM group GmbH

Kurfürstendamm 21

10719 Berlin, Germany

Page is loading ...

40

HINWEISE ZUM UMWELTSCHUTZ

DE

Alt-Elektrogeräte sind Wertstoffe, sie gehören daher nicht in den

Hausmüll!

Wir möchten Sie daher bitten, uns mit Ihrem aktiven Beitrag bei

der Ressourcenschonung und beim Umweltschutz zu unterstüt-

zen und dieses Gerät bei den-falls vorhandeneingerichteten

Rücknahmestellen abzugeben.

ENVIRONMENTAL PROTECTION

GB

Discarded electric appliances are recyclable and should not be

discarded in the domestic waste! Please actively support us in

conserving resources and protecting the environment by

returning this appliance to the collection centres (if available).

INFORMATIONS SUR LA

PROTECTION DE L’ENVIRONNEMENT

FR

Tout appareil électrique usé est une matière recyclable et ne fait

pas pas partie des ordures ménagères! Nous vous demandons

de bien vouloir nous soutenir en contribuant activement au mé-

nagement des ressources et à la protection de l’environnement

en déposant cet appareil dans sites de collecte(si existants).

RICHTLIJNEN VOOR

MILIEUBESCHERMING

NL

Gebruikte elektronische apparaten horen niet thuis in het hui-

safval!

Wij vragen u daarom een bijdrage aan de bescherming van ons

milieu te leveren en dit apparaat op de voorziene verzamelpla-

atsen af te geven.

ANVISNINGER OM

MILJØBESKYTTELSE

DK

Kasserede elektriske apparater indeholder materiale, der kan

genbruges, og bør derfor aldrig smides væk som almindeligt af-

fald. Når dette apparat skal kasseres, vil vi derfor opfordre Dem

til at aﬂ evere det på et egnet opsamlingssted, hvis et sådant ﬁ n-

des, og således være med til at bevare ressourcer og beskytte

miljøet.

AVVERTENZE PER LA TUTELA

DELL’AMBIENTE

IT

Gli apparecchi elettrici vecchi sono materiali pregiati, non rientra-

no nei normali riﬁ uti domestici! Preghiamo quindi i gentili clienti

di contribuire alla salvaguardia dell’ambiente e delle risorse e di

consegnare il presente apparecchio ai centri di raccolta compe-

tenti, qualora siano presenti sul territorio

ADVERTENCIA PARA LA

PROTECCIÓN DEL MEDIO AMBIENTE

ES

¡Los aparatos eléctricos desechables son materiales que no son

parte de la basura doméstica! Por ello pedimos para que nos

ayude a contribuir activamente en el ahorro de recursos y en la

protección del medio ambiente entregando este aparato en los

puntos de recogida existentes.

INDICAÇÕES PARA A PROTECÇÃO

DO MEIO AMBIENTE

PT

Aparelhos eléctricos antigos são materiais que não pertencem

ao lixo doméstico! Por isso pedimos para que nos apoie, con-

tribuindo activamente na poupança de recursos e na protecção

do ambiente ao entregar este aparelho nos pontos de recolha,

caso existam.

INDICAŢII PENTRU PROTECŢIA

MEDIULUI ÎNCONJURĂTOR

RO

Aparatele electrice uzate sunt materiale valoroase, motiv pentru

care locul lor nu este la gunoiul menajer! Din această cauză,

vă rugăm să ne sprijiniţi şi să participaţi la protejarea resurselor

naturale şi a mediului înconjurător, prin predarea acestui aparat

la centrele de preluare a acestora, în cazul în care ele există.

A KÖRNYEZETVÉDELEMMEL

KAPCSOLATOS TUDNIVALÓK

HU

A kiselejtezett elektromos készülékek értékes nyersanyagokat

tartalmaznak, és erre ﬁ gyelemmel nem tartoznak a háztartási

hulladék körébe! A gyártómű minden felhasználót arra kér, hogy

a maga részéről is tegyen meg mindent a költségkímélés és kör-

nyezetvédelem érdekében, és a kiselejtezett készüléket adja át

az erre a célra kialakított visszavételi helyen, amennyiben van

ilyen a környéken.

ÅTERVINNING

SE

Elektriska verktyg, tillbehör och förpackning får inte kastas i hus-

hållssoporna (gäller endast EU-länder). Enligt direktivet 2002/96/

EG som avser äldre elektrisk och elektronisk utrustning och dess

tillämpning enligt nationell lagstiftning ska uttjänta elektriska

verktyg sorteras separat och lämnas till miljövänlig återvinning

YMPÄRISTÖNSUOJELU

FI

Älä hävitä sähkötyökalua, tarvikkeita tai pakkausta tavalli-

sen kotitalousjätteen mukana (koskee vain EU-maita). Van-

hoja sähkö- ja elektroniikkalaitteita koskevan EU-direktiivin

2002/96/ETY ja sen maakohtaisten sovellusten mukaisesti käy-

tetyt sähkötyökalut on toimitettava ongelmajätteen keräyspistee-

seen ja ohjattava ympäristöystävälliseen kierrätykseen

MILJØVERN

NO

Kast aldri elektroverktøy, tilbehør og emballasje i husholdnings-

avfallet (kun for EU-land). I henhold til EU-direktiv 2002/96/EF

om kasserte elektriske og elektroniske produkter og direktivets

iverksetting i nasjonal rett, må elektroverktøy som ikke lenger

skal brukes, samles separat og returneres til et miljøvennlig gjen-

vinningsanlegg

ΥΠΟΔΕΙΞΕΙΣ ΓΙΑ ΤΗΝ ΠΡΟΣΤΑΣΙΑ

ΤΟΥ ΠΕΡΙΒΑΛΛΟΝΤΟΣ

GR

Οι παλιές ηλεκτρικές συσκευές είναι πολύτιμα υλικά και συνεπώς

δεν έχουν θέση στα οικιακά απορρίμματα! Θα θέλαμε λοιπόν να

σας παρακαλέσουμε να μας υποστηρίξετε συμβάλλοντας ενερ-

γά στην προστασία των πρώτων υλών και του περιβάλλοντος

παραδίδοντας τη συσκευή αυτή στις υπηρεσίες ανακύκλωσης

- εφόσον υπάρχουν.

Page is loading ...

Bort BSM-750U User manual

This manual is also suitable for

Bort BSM-750U User manual

in other languages

Related papers

Other documents