Bort BBS-801N User manual

BBS-801N

93728007

Bedienungsanleitung ..........................6

User’s Manual ....................................7

Mode d’emploi ................................... 8

Instrucciones de servicio ....................9

Manual de instruções .......................10

Istruzione per l’uso ...........................11

Gebruiksaanwijzing ..........................12

Brugervejledning ..............................13

Bruksanvisning .................................14

Bruksanvisning .................................15

Käyttöohje ........................................16

Kasutusjuhend .................................17

Instrukcija .........................................18

Instrukcija .........................................19

   .........20

   .......21

   ................22

Instruksja obsugi .............................23

Návod k použití ................................24

Uputstvo za korisnike .......................25

Használati utasítás ..........................26

Manual de utilizare ...........................27

Navodilo za uporabo ........................28

BOS

Upute za uporabu ...................29

  ............................30

Kullanım kılavuzu .............................31

...........32

Page is loading ...

7

GB

Belt sander

INTENDED USE

This tool is intended for dry sanding with high removal

performance of wood, plastic, metal, etc.

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/off switch

2 Knob for locking on/off switch

3 Lever for changing sanding belt

4 Arrow

5 Knob for adjusting belt centering

6 Dustbag

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

ﬁ re and/or serious injury.

 Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

 Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

 When you put away the tool, switch off the motor and

ensure that all moving parts have come to a com-

plete standstill

 Use completely unrolled and safe extension cords

with a capacity of 16Amps (U.K. 13 Amps)

 In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the

plug

 SBM GROUP can assure ﬂ awless functioning of the

tool only when original accessories are used

 This tool should not be used by people under the age

of 16 years

 The noise level when working can exceed 85 dB(A);

wear ear protection

 If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect

the plug

 Never use tool when cord is damaged; have it re-

placed by a qualiﬁ ed person

 Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be con-

nected to a 220V supply)

 This tool is not suitable for wet sanding

 Do not work materials containing asbestos (asbestos

is considered carcinogenic)

 Take protective measures when during work dust can

develop that is harmful to one’s health, combustible

or explosive (some dusts are considered carcino-

genic); wear a dust mask and work with dust/chip

extraction when connectable

 When sanding metal, sparks are generated; do not

use dustbox/dustbag/vacuum cleaner and keep other

persons and combustible material from work area

 Do not touch the running sanding belt

 Do not continue to use worn, torn or heavily clogged

sanding belts

 Wear protective gloves, safety glasses, close-ﬁ tting

clothes and hair protection (for long hair)

 Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ON-

LY):

 Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of

the plug

 If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left

unattended

 before the sanding surface reaches the workpiece,

you should switch on the tool

 before switching off the tool, you should lift it from

the workpiece

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

English

Page is loading ...

34

Exploded view BBS-801N

2

3

6

7

15

14

16

26

22

24

25

29

30

32

34

38

48

49

50

51

57

58

61

63

64

66

67

68

69

35

Spare parts list BBS-801N

No. Part Name

2 Big gear

3 Ball bearing

6 Ball bearing 608RS

7 Aluminum base

14 Needle bearing

15 Front wheel

16 Front-wheel frame

22 Copper sets

24 Real wheel shaft

26 Bearing 606

25 Real wheel

30 Introduction sets of wind

32 Stator

34 Left housing

38 Speed regular

48 Brush holder

49 Brush

50 Brush cover grip

51 Switch

57 Timing Belt

58 Small pulley

61 Middle cover

63 Bearing 608 RS

64 Rotor

66 Bearing 626 RS

67 Large Pulley

68 Bearing 608 RS

69 Gear shaft

36

GB

DECLARATION OF CONFORMITY

We declare under our sole responsibility that this

product is in conformity with the following standards

or standardized documents: EN 55014-1:2006; EN

55014-2/A1:2001; EN 61000-3-2:2006; EN 61000-3-3/

A2:2005 in accordance with the regulations 2006/42/

E, 2006/95/E, 2004/108/E.

NOISE/VIBRATION Measured in accordance with EN

60745 the sound pressure level of this tool is <87,4 dB(A)

and the sound power level is <98,4 dB(A) (standard de-

viation: 3 dB), and the vibration is <3,7 m/s

2

(hand-arm

method).

DE

KONFORMITÄTSERKLÄRUNG

Wir erklären in alleiniger Verantwortung, daß dieses

Produkt mit den folgenden Normen oder normativen

Dokumenten übereinstimmt: EN 55014-1:2006; EN

55014-2/A1:2001; EN 61000-3-2:2006; EN 61000-3-

3/A2:2005 gemäß den Bestimmungen der Richtlinien

2006/42/G, 2006/95/G, 2004/108/G.

GERÄUSCH/VIBRATION Gemessen gemäß EN 60

745 beträgt der Schalldruckpegel dieses Gerätes

<87,4 dB(A) und der Schalleistungspegel <98,4 dB(A)

(Standard- abweichung: 3 dB), und die Vibration

<3,7 m/s

2

(Hand-Arm Methode).

FR

DÉCLARATION DE CONFORMITÉ

Nous déclarons sous notre propre responsabilité que

ce produit est en conformité avec les normes ou docu-

ments normalisés suivants: EN 55014-1:2006; EN

55014-2/A1:2001; EN 61000-3-2:2006; EN 61000-3-3/

A2:2005 conforme aux réglementations 2006/42/EE,

2006/95/EE, 2004/108/EE.

BRUIT/VIBRATION Mesuré selon EN 60 745 le niveau de

la pression sonore de cet outil est <87,4 dB(A) et le niveau

de la puissance sonore <98,4 dB(A) (déviation standard: 3

dB), et la vibration <3,7 m/s

2

(méthode main-bras).

ES

DECLARACIÓN DE CONFORMIDAD

Declaramos bajo nuestra sola responsabilidad que

este producto está en conformidad con las normas

o documentos normalizados siguientes: EN 55014-

1:2006; EN 55014-2/A1:2001; EN 61000-3-2:2006; EN

61000-3-3/A2:2005 de acuerdo con las regulaciones

2006/42/EE, 2006/95/EE, 2004/108/EE.

RUIDOS/VIBRACIONES Medido según EN 60 745

el nivel de la presión acústica de esta herramienta se

eleva a <87,4 dB(A) y el nivel de la potencia acústica

<98,4 dB(A) (desviación estándar: 3 dB), y la vibración

a <3,7 m/s

2

(método brazo-mano).

PT

DECLARAÇÃO DE CONFIRMIDADE

Declaramos sob nossa exclusiva responsabilidade que

este producto cumpre as seguintes normas ou docu-

mentos normativos: EN 55014-1:2006; EN 55014-2/

A1:2001; EN 61000-3-2:2006; EN 61000-3-3/A2:2005

conforme as disposições das directivas 2006/42/EE,

2006/95/EE, 2004/108/EE.

RUlDO/VIBR AÇÕES Medido segundo EN 60 745 o nív-

el de pressão acústica desta ferramenta é <87,4 dB(A) e

o nível de potência acústica <98,4 dB(A) (espaço de erro:

3 dB), e a vibração <3,7 m/s

2

(método braço-mão).

IT

DICHIARAZIONE DI CONFORMITÀ

Dichiaramo, assumendo la piena responsabilità di tale

dichiarazione, che il prodotto è conforme alle seguenti

normative e ai relativi documenti: EN 55014-1:2006; EN

55014-2/A1:2001; EN 61000-3-2:2006; EN 61000-3-3/

A2:2005 in base alle prescrizioni delle direttive 2006/42/

EE, 2006/95/EE, 2004/108/EE.

RUMOROSITÀ/VIBRAZIONE Misurato in conformità

al EN 60 745 il livello di pressione acustica di questo

utensile è <87,4 dB(A) ed il livello di potenza acustica

è <98,4 dB(A) (deviazione standard: 3 dB), e la vi-

brazione è <3,7 m/s

2

(metodo mano-braccio).

NL

CONFORMITEITSVERKLARING

Wij verklaren, dat dit product voldoet aan de vol-

gende normen of normatieve documenten: EN

55014-1:2006; EN 55014-1:2006; EN 55014-2/

A1:2001; EN 61000-3-2:2006; EN 61000-3-3/

A2:2005 overeenkomstig de bepalingen van de rich-

tlijnen 2006/42/EG, 2006/95/EG, 2004/108/EG.

GELUID/VIBRATIE Gemeten volgens EN 60 745

bedraagt het geluidsdrukniveau van deze ma-

chine <87,4 dB(A) en het geluidsvermogen-niveau

<98,4 dB(A) (standaard deviatie: 3 dB), en de vibratie

<3,7 m/s

2

(hand-arm methode).

Product managament

V. Nosik

SBM group GmbH

Kurfürstendamm 21

10719 Berlin, Germany

Page is loading ...

40

HINWEISE ZUM UMWELTSCHUTZ

DE

Alt-Elektrogeräte sind Wertstoffe, sie gehören daher nicht in den

Hausmüll!

Wir möchten Sie daher bitten, uns mit Ihrem aktiven Beitrag bei

der Ressourcenschonung und beim Umweltschutz zu unterstüt-

zen und dieses Gerät bei den-falls vorhandeneingerichteten

Rücknahmestellen abzugeben.

ENVIRONMENTAL PROTECTION

GB

Discarded electric appliances are recyclable and should not be

discarded in the domestic waste! Please actively support us in

conserving resources and protecting the environment by

returning this appliance to the collection centres (if available).

INFORMATIONS SUR LA

PROTECTION DE L’ENVIRONNEMENT

FR

Tout appareil électrique usé est une matière recyclable et ne fait

pas pas partie des ordures ménagères! Nous vous demandons

de bien vouloir nous soutenir en contribuant activement au mé-

nagement des ressources et à la protection de l’environnement

en déposant cet appareil dans sites de collecte(si existants).

RICHTLIJNEN VOOR

MILIEUBESCHERMING

NL

Gebruikte elektronische apparaten horen niet thuis in het hui-

safval!

Wij vragen u daarom een bijdrage aan de bescherming van ons

milieu te leveren en dit apparaat op de voorziene verzamelpla-

atsen af te geven.

ANVISNINGER OM

MILJØBESKYTTELSE

DK

Kasserede elektriske apparater indeholder materiale, der kan

genbruges, og bør derfor aldrig smides væk som almindeligt af-

fald. Når dette apparat skal kasseres, vil vi derfor opfordre Dem

til at aﬂevere det på et egnet opsamlingssted, hvis et sådant ﬁn-

des, og således være med til at bevare ressourcer og beskytte

miljøet.

AVVERTENZE PER LA TUTELA

DELL’AMBIENTE

IT

Gli apparecchi elettrici vecchi sono materiali pregiati, non rientra-

no nei normali riﬁuti domestici! Preghiamo quindi i gentili clienti

di contribuire alla salvaguardia dell’ambiente e delle risorse e di

consegnare il presente apparecchio ai centri di raccolta compe-

tenti, qualora siano presenti sul territorio

ADVERTENCIA PARA LA

PROTECCIÓN DEL MEDIO AMBIENTE

ES

¡Los aparatos eléctricos desechables son materiales que no son

parte de la basura doméstica! Por ello pedimos para que nos

ayude a contribuir activamente en el ahorro de recursos y en la

protección del medio ambiente entregando este aparato en los

puntos de recogida existentes.

INDICAÇÕES PARA A PROTECÇÃO

DO MEIO AMBIENTE

PT

Aparelhos eléctricos antigos são materiais que não pertencem

ao lixo doméstico! Por isso pedimos para que nos apoie, con-

tribuindo activamente na poupança de recursos e na protecção

do ambiente ao entregar este aparelho nos pontos de recolha,

caso existam.

ÅTERVINNING

SE

Elektriska verktyg, tillbehör och förpackning får inte kastas i hus-

hållssoporna (gäller endast EU-länder). Enligt direktivet 2002/96/

EG som avser äldre elektrisk och elektronisk utrustning och dess

tillämpning enligt nationell lagstiftning ska uttjänta elektriska

verktyg sorteras separat och lämnas till miljövänlig återvinning

YMPÄRISTÖNSUOJELU

FI

Älä hävitä sähkötyökalua, tarvikkeita tai pakkausta tavalli-

sen kotitalousjätteen mukana (koskee vain EU-maita). Van-

hoja sähkö- ja elektroniikkalaitteita koskevan EU-direktiivin

2002/96/ETY ja sen maakohtaisten sovellusten mukaisesti käy-

tetyt sähkötyökalut on toimitettava ongelmajätteen keräyspistee-

seen ja ohjattava ympäristöystävälliseen kierrätykseen

MILJØVERN

NO

Kast aldri elektroverktøy, tilbehør og emballasje i husholdnings-

avfallet (kun for EU-land). I henhold til EU-direktiv 2002/96/EF

om kasserte elektriske og elektroniske produkter og direktivets

iverksetting i nasjonal rett, må elektroverktøy som ikke lenger

skal brukes, samles separat og returneres til et miljøvennlig gjen-

vinningsanlegg

KESKONNAKAITSE

EE

Ärge visake kasutuskõlbmatuks muutunud elektrilisi tööriistu, lisatarvi-

kuid ja pakendeid ära koos olmejäätmetega (üksnes EL liikmesriikide-

le). Vastavalt Euroopa Parlamendi ja nõukogu direktiivile 2002/96/EÜ

elektri- ja elektroonikaseadmete jäätmete kohta ning direktiivi nõuete

kohaldamisele liikmesriikides tuleb kasutuskõlbmatuks muutunud elekt-

rilised tööriistad koguda eraldi ja keskkonnasäästlikult korduvkasutada

või ringlusse võtta

APLINKOS APSAUGA

LT

Nemeskite elektrini ranki, papildomos rangos ir pakuots  buitini

atliek konteinerius (galioja tik ES valstybms). Pagal ES Direktyv

2002/96/EG dl naudot elektrini ir elektronini prietais atliek utili-

zavimo ir pagal vietinius valstybs statymus atitarnav elektriniai ran-

kiai turi bti surenkami atskirai ir gabenami  antrini žaliav tvarkymo

vietas, kur jie turi bti sunaikinami ar perdirbami aplinkai nekenksmingu

bdu

APKĀRTĒJĀS VIDES AIZSARDZĪBA

LV

Neizmetiet elektroiekrtas, piederumus un iesaiojuma materilus

sadzves atkritumos (tikai ES valstm). Saska ar Eiropas Direktvu

2002/96/EG par lietotajm elektroiekrtm, elektronikas iekrtm un ts

iekaušanu valsts likumdošan lietots elektroiekrtas ir jsavc atse-

viši un jnogd otrreizjai prstrdei videi draudzg veid

Page is loading ...

Bort BBS-801N User manual

Bort BBS-801N User manual

in other languages

Related papers

Other documents