Santec VTC-262HWD User manual

Category
Security cameras
Type
User manual
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 3 -
Dear customer,
Thank you for purchasing a high quality SANTEC device.
We recommend that you read this manual thoroughly before operating your new system for
the first time. Please follow all instructions and observe the warnings contained in this
manual.
Please contact your local dealer or us if you have any questions or if you wish to claim for a
service or warranty.
You will find further information on our website:
www.santec-video.com
All rights reserved. This publication may not be reproduced, stored in a retrieval system or transmitted,
in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without
the written prior permission of SANTEC BW AG.
No reproduction of any part or excerpts thereof are permitted.
Errors excepted. Specifications are subject to change without notice for quality improvement.
SANTEC is a registered trademark of SANTEC BW AG. All other companies or products mentioned in
this publication are trademarks, registered trademarks or brands of the respective company.
© Copyright by SANTEC BW AG, Ahrensburg (Germany)
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 5 -
7. VTC-279IRHWD, VTC-289IRHWD 34
7.1 Lieferumfang 34
7.2 Die Kamera im Überblick 34
7.3 Zugang zum Mini-Joystick und OSD-Einstellungen 35
7.4 Objektiv-Einstellungen 35
7.5 IR-LED Einstellungen 35
7.6 Technische Daten 36
7.7 Technische Zeichnung 37
8. Einstellungen der Kamera über das OSD (Bildschirm-Menü) 39
8.1 Übersicht über das Hauptmenü 39
8.2 Belichtung 41
8.3 Tag/Nacht 41
8.4 Weißabgleich 41
8.5 Monitor 42
8.6 Bild 42
8.7 DNR 42
8.8 Bewegung 42
8.9 System 43
8.10 Ende 43
ENGLISH
Table of contents
Safety precautions 45
Safety instructions 46
About this user manual 47
1. Special features 48
2. General installation 49
2.1 Power supply and monitor impedance 49
2.2 Connections 49
3. VTC-262HWD 50
3.1 Items included in the delivery 50
3.2 Camera overview 50
3.3 Access to mini-joystick and OSD setting 51
3.4 Lens setting 51
3.5 Technical specifications 52
3.6 Technical drawing 53
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 6 -
4. VTC-322HWD 55
4.1 Items included in the delivery 55
4.2 Camera overview 55
4.3 Access to mini-joystick and OSD setting 57
4.4 Lens setting 57
4.5 Technical specifications 58
4.6 Technical drawing 59
5. VTC-369IRHG, VTC-369IRHW 60
5.1 Items included in the delivery 60
5.2 Camera overview 60
5.3 Access to mini-joystick and OSD setting 61
5.4 Lens setting 62
5.5 IR LED setting 63
5.5 Technical specifications 64
5.6 Technical drawing 65
6. VTC-432IRHWD 66
6.1 Items included in the delivery 66
6.2 Camera overview 66
6.3 Access to mini-joystick and OSD setting 68
6.4 Lens setting 68
6.5 IR LED setting 68
6.5 Technical specifications 69
6.6 Technical drawing 70
7. VTC-279IRHWD, VTC-289IRHWD 72
7.1 Items included in the delivery 72
7.2 Camera overview 72
7.3 Access to mini-joystick and OSD setting 73
7.4 Lens setting 73
7.5 IR LED setting 73
7.5 Technical specifications 74
7.6 Technical drawing 75
8. Camera settings via OSD menu 77
8.1 Main menu: Overview 78
8.2 Exposure 79
8.3 Day/night 79
8.4 White balance 79
8.5 Monitor 80
8.6 Image 80
8.7 DNR 80
8.8 Motion 80
8.9 System 81
8.10 Exit 81
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 45 -
Safety precautions
Caution
Description of symbols
Danger: This symbol is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to a person.
Warning: This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
CE compliance
Attention: Any changes or modifications to this appliance which have not been explicitly
approved of by the respective regulatory authority, may lead to a prohibition of usage of this
appliance.
This appliance complies with the CE guidelines.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 46 -
Safety instructions
Before operating the appliance, please read this manual carefully and retain it for further
reference.
Before cleaning the appliance, it has to be switched off and unplugged from the power outlet.
Wipe the appliance with a soft damp cloth.
Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.
Do not use attachments unless recommended by the manufacturer as they may affect the
functionality of the appliance and result in the risk of fire, electric shock or injury.
Never install the appliance in areas exposed to water or other liquids.
The appliance has to be installed in a safe and stable location which is able to carry the weight of
the appliance. Quick stops, excessive force, and uneven surfaces may cause the appliance to fall
causing serious injury to persons and damage to objects.
Openings in the appliance, if any, are provided for ventilation to ensure reliable operation of the
appliance and to protect if from overheating. These openings must not be covered or blocked.
Please make sure that the appliance does not overheat.
The appliance should only be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied at the installation location, please contact
your local dealer.
An appliance which is powered through a polarized plug (a plug with one blade wider than the
other) will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized
plug.
If the appliance is powered through a grounding-type plug, the plug will only fit into a grounding-
type power outlet. This is a safety feature. If your outlet does not have the grounding plug
receptacle, contact your local electrician.
Route power cords and cables in a manner to protect them from damage by being walked on or
pinched by items places upon or against them.
For protection of the appliance during a lightning storm or when it is left unattended and unused
for a longer period, unplug the appliance from the wall outlet. Disconnect any antennas or cable
systems that may be connected to the appliance. This will prevent damage to the appliance due to
lightning or power-line surges.
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
Never insert items into the openings of the appliance. They may touch parts under electric current
which may cause an electric shock.
Never pour any liquids over the appliance.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 47 -
In case of any operating interruption or a complete operating failure please switch off the
appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance
yourself, as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
When replacement parts are required, be sure that the service technician uses replacements parts
specified by the manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
Upon completion of any service or repairs to the appliance, ask the service technician to perform
safety checks to verify that the appliance is in proper operating condition.
The appliance must only be installed by qualified service personnel and has to comply with local
specifications and regulations.
Never point the camera at an object with a high degree of luminance. Bright vertical or horizontal
lines can result in a distortion (outshine) of the entire image on the monitor. This artifact is not an
error but a particularity of semiconductor CCDs when they are directly exposed to a powerful light
source.
At the installation site, the camera has to be adjusted to the given light conditions (see OSD).
Please respect the local legal regulations on waste if you need to dispose of discarded appliances.
This symbol means that electrical appliances need to be disposed of properly and not
simply with unsorted household refuse. Please respect local regulations on waste
disposal.
For cameras equipped with IR LEDs::
Please make sure to always keep a distance of > 1m to avoid damages to your
health. Never look directly into the IR-LEDs this may cause eye damages!
About this user manual
This manual aims at assisting the user on how to the described cameras.
This manual is subject to rigid quality control. However, no guarantee can be given that mistakes are
not present. We reserve the right to make changes to the manual without prior notice.
Before operating the appliance, please read this manual carefully and retain it for further reference.
Verify that all appliance items are included in the delivery. Should items be missing, do not operate the
appliance and contact your local dealer.
Never attempt to repair the appliance yourself. This should only be done by qualified service
personnel.
Improper handling of the appliance will invalidate the warranty.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 48 -
1. Special features
Day/night camera with electronic switching
High resolution 700 TVL
Effective pixel: 976 (H) x 582 (V)
Integrated manual zoom lens
Digital Wide Dynamic Range (D-WDR) function
Privacy zones
Convenient camera adjustment by OSD menu using a mini-joystick
Integrated IRLEDs (not for cameras VTC-262HWD and VTC-322HWD)
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 49 -
2. General installation
This camera has been designed for video surveillance applications. The appliance must only
be installed by qualified service personnel and has to comply with local specifications and
regulations.
Make sure to fix the camera onto a solid basis (wall or ceiling) which is capable of carrying
the weight of the camera. Ensure that the camera is safely installed by using only suitable
screws.
2.1 Power supply and monitor impedance
Only use a stabilised 12 V DC or 24 V AC power supply unit with sufficient wattage (see
chapter “Technical specifications” for recommended power supply units).
Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be 75 Ohm. Verify the
connection in case the video picture is of poor quality.
On the camera, you will find an additional video connection.
A cable adapter BNC socket/plug is included in the delivery which can be put onto the
additional video connection, e.g. to connect a monitor during the camera installation phase in
case the regular cable has already been laid.
2.2 Connections
The following connections/adapters are included in the delivery:
Video connection
(BNC socket)
Power connection
(DC socket)
Cable adapter/
screw connector
Cable adapter BNC socket,
e.g. for monitor connection
during installation phase
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 50 -
3. VTC-262HWD
3.1 Items included in the delivery
1x Camera
1x Adapter: Plug/screw connector
1x Adapter: BNC socket
1x User manual
3.2 Camera overview
Picture 1:
Picture 2:
Picture 3: Picture 4:
Screw to fix the lens
Open here
Mini-joystick for
OSD setting
Lens adjustment
Additional video connection (via adapter), e.g. for
monitor connection during installation phase
The arrows mark the 3-axis position options
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 51 -
3.3 Access to mini-joystick and OSD setting
All camera adjustments are done via an OSD menu using a mini-joystick. Access the mini-
joystick as follows (also see pictures 1 and 2):
Open the housing by carefully turning it counter-clockwise.
On the camera, you will fin a mini-joystick for OSD settings and the additional video
connection. Press onto the joystick and a menu pops up in the video picture. You can now
move the joystick left/right/up/down in order to get to the desired menu item. For confirming
your choice, press onto the joystick.
See chapter 8 for „Camera settings via OSD menu“.
Once all settings are made, carefully close the housing again by turning it clockwise.
Finally, clean the camera dome to remove fingerprints and other stains.
3.4 Lens setting
To achieve the correct angle of view, turn the zoom ring until you get from a wide angle to a
near angle or vice versa. Use the second ring to adjust the sharpness. See picture 3.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 52 -
3.5 Technical specifications
Camera model
VTC-262HWD
Camera type
Day/night dome camera
Installation
For indoor installations
Video norm
PAL
Sensor
1/3“ Sony 960H Super HAD II CCD Chip
Horizontal resolution
700 TVL (colour) / 700 TVL (black/white)
Active pixel
976 (H) x 582 (V)
S/N ratio
> 52 dB
Lens
2.8 - 12 mm, 3x vario
Sensitivity
0.0002 lux at F1.2
Digital noise reduction
Yes, 3-DNR
Backlight compensation
DWDR, BLC, HLC
Day/night mode adjustment
Auto, colour, black/white, external
Mirroring
Left, right
Motion detection
4 zones
Privacy zones
8 zones
Camera title
15 characters
Video output
1.0 Vpp at 75 Ohm BNC-connector
Classification
IP-44
Heater
No
Camera mounting
Ceiling/wall mount
OSD menu
Via mini-joystick
IR LEDs
No
Voltage
12 V DC / 24 V AC
Power consumption
Approx. 3.5 watt
Dimensions (DxH)
140 x 96 mm
Weight
Approx. 350 g
Certification
CE
Housing
Plastic, white
Operating temperature
-10° to +50° C
Recommended accessories
Power supply unit
VCA-12V-1.5ASA
VCA-24V-1A/B
Wall bracket
WB-HDH
Subject to technical changes without notice. Errors excepted.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 54 -
Bottom view:
All dimensions in mm.
Drawings not true to scale.
Subject to technical changes without notice. Errors excepted.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 55 -
4. VTC-322HWD
4.1 Items included in the delivery
1x Camera
1x Adapter: Plug/ screw connector
1x Adapter: BNC socket
1x User manual
4.2 Camera overview
Picture 1:
Picture 2:
Safety screws to fix the
housing
Video connection
(BNC socket)
Power connection
(DC socket)
Screws for camera mounting
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 56 -
Picture 3:
Picture 4:
Picture 5:
Additional video connection (via adapter), e.g. for monitor
connection during installation phase
Mini-joystick for
OSD setting
Screws for lens setting
Optional:
White dome cover CABD322W to be put over the housing
The camera can be
positioned on 3 axis.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 57 -
4.3 Access to mini-joystick and OSD setting
All camera adjustments are done via an OSD menu using a mini-joystick. Access the mini-
joystick as follows (see pictures 1 and 3):
Loosen the security screw on the housing. Pull the housing off. On the camera board, you
will fin a mini-joystick for OSD settings and the additional video connection. Press onto the
joystick and a menu pops up in the video picture. You can now move the joystick
left/right/up/down in order to get to the desired menu item. For confirming your choice, press
onto the joystick.
See chapter 8 for „Camera settings via OSD menu“.
Once all settings are made, put the housing back onto the camera and tighten the security
screw again carefully.
Finally, clean the camera dome to remove fingerprints and other stains.
4.4 Lens setting
Lens control (focal length and focus) is done by the two setting rings.
Carefully loosen the two safety screws a bit so that you are able to turn the setting rings.
Adjust the lens according to your needs. Finally, seize the two safety screws again carefully.
See picture 4.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 58 -
4.5 Technical specifications
Camera model
VTC-322HWD
Camera type
Day/night camera in weather-proof housing
Installation
For indoor and outdoor installations
Video norm
PAL
Sensor
1/3“ Sony 960H Super HAD II CCD Chip
Horizontal resolution
700 TVL (colour) / 700 TVL (black/white)
Active pixel
976 (H) x 582 (V)
S/N ratio
> 52 dB
Lens
Integrated DC-controlled 2.812 mm lens
Sensitivity
0.0002 lux at F1.2
Digital noise reduction
Yes, 3-DNR
Backlight compensation
DWDR, BLC, HLC
Day/night mode adjustment
Auto, colour, black/white, external
Mirroring
Left, right
Motion detection
4 zones
Privacy zones
8 zones
Camera title
15 characters
Video output
1.0 Vpp at 75 Ohm BNC-connector
Classification
IP-66
Heater
No
Camera mounting
Ceiling/wall mount
OSD menu
Via mini-joystick
IR LEDs
No
Voltage
12 V DC
Power consumption
Approx. 3.5 watt
Dimensions (DxH)
110 x 80 mm
Weight
Approx. 550 g
Certification
CE
Housing
Metal, anthracite
Operating temperature
-10° to +50° C
Recommended accessories
Power supply unit
VCA-12V-1.5ASA
Wall bracket
WB-HDH
White housing cover
CABD322W
Subject to technical changes without notice. Errors excepted.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 59 -
4.6 Technical drawing VTC-322HWD
Side view: Top view:
Bottom view:
All dimensions in mm.
Drawings not true to scale.
Subject to technical changes without notice. Errors excepted.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 60 -
5. VTC-369IRHG, VTC-369IRHW
5.1 Items included in the delivery
1x Camera
1x Adapter: Plug/screw connector
1x Adapter: BNC socket
1x Focus adjuster
1x User manual
5.2 Camera overview
Mounting:
1. Loosen the safety screw at the housing ring.
2. Carefully twist the housing ring off the mounting ring.
3. Use suitable screws to fix the mounting ring in the desired position (wall or ceiling).
4. Put the camera ball into the ball cup and attach them to the mounting ring using the
housing ring. Don’t tighten it too much but ensure that the camera ball is still free to
move so that you can adjust the lens (see chapter 5.4).
5. Connect the video and power cables.
6. Only after the lens adjustment has been made, seize tight the housing ring to the
mounting ring (see chapter 1.2).
Additional video connection (via
adapter), e.g. for monitor
connection during installation
phase
Open housing ring
Close housing ring
Focus adjustment
Mounting ring
Removable cover
for service access
Mini-joystick for
OSD setting
IR-LED adjustment:
It is possible to switch off
the IR-LED completely so
that the camera can also be
operated without IR
illumination.
Ball cup
Camera ball
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 61 -
7. Tighten the safety screw at the housing ring.
8. Use the focus adjuster (included in the delivery) to set the lens‘ focal length and
zoom.
Instruction on lens settings can be found in chapter 5.4.
Attention:
The camera ball must not be opened which would invalidate the warranty.
5.3 Access to mini-joystick and OSD setting
All camera adjustments are done via an OSD menu using a mini-joystick. Access the mini-
joystick as follows (also see image in chapter 5.2):
Move the camera ball into a position so that the removable service cover becomes
accessible. Loosen the two security screws and remove the service cover.
Underneath the service cover, you will find a mini-joystick for the OSD control, a switch for
adjusting the brightness of the IR-LEDs and an additional video connection for service
purposes (connection is being done by the included adapter). Press onto the joystick and a
menu pops up in the video picture. You can now move the joystick left/right/up/down in order
to get to the desired menu item. For confirming your choice, press onto the joystick.
See chapter 8 for „Camera settings via OSD menu“.
Once all settings are made, please close the service cover again.
Finally, clean the front glass to remove fingerprints and other stains.
Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 62 -
5.4 Lens setting
1. Loosen the housing ring from the mounting ring only a bit so that the camera ball can
move freely.
Attention:
Don’t loosen the housing ring too much to avoid that the camera drops down to the
floor!
2. Turn the camera ball to adjust the lens to the desired position.
3. Adjust the focus and the zoom.
4. When adjusting the lens, please make sure that when in the final position neither
the lens nor the IR LEDs are covered by the housing ring but instead they are
positioned in the cut-out. Please ensure that the IR LEDs are not covered.
5. Once the lens has been set and positioned, tighten the housing ring again to the
mounting ring and secure it with the safety screw.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Santec VTC-262HWD User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages