Page is loading ...
www.izehoo.com
Thank you
for purchasing a ZeeHoo product.
Our goal is to make sure that you are completely
satisfied with your purchase.
Please contact us at any time 24 / 7 / 365
if you have any questions,
concerns or need to submit
warranty request
WEB
[email protected] izeehoo.com/pages/contact
Cautions
Do not expose it to moisture or submerge it in liquid.
Do not disassemble it or attempt to re-purpose or modify it in any manner.
If you found this product is excessively hot, emitting odor,deformed or have
any other abnomalities,please Stop using it and contact manufacturer
immediately.
Do not clean it with harmful chemicals or detergents
Be cautious of drops, bumps, abrasions or other impacts.
Avoid strenuous vibration,impact and extrusion on transportation, while
keeping the product away from intense sunlight and rain.
Keep it away from children under 3 years old for safety.
Please dispose of discarded products properly according to local regulations.
Specifications
Product Dimension
Product Material
Input
Model ZCM01
DC5V/0.5-2A or DC3V==(Triple A battery X 2)
ф72.5*118**71mm
ABS + PC
Mounting The Vent Clip
1
Unscrew the nut, let ball go through the nut.
2
Fasten the nut into the spherical top and push the nut forcibly
into the round hole, then tighten the nut to secure.
3
Insert the adjustable claw into your car’s air vent, adjust the
car mount to the optimal viewing angle to make sure the
claw is inserted securely in position.
Adjust the Vent Clip Horizontally/Vertically at a proper angle
to match the air vents, having the holder touch the vent
bottom surface (not inserting it into the vent) so it can form a
triangle position, then press and hold the Clip to insert into your
car’s air vents making the claw more stable to hold your phone.
Vertically air vents type
Vent Clip
Holder
Having the holder touch the vent bottom surface
(not inserting it into the vent)
Horizontally air vents type
The Automatic Smart Car Mount is powered via a USB-C cable or
Triple A battery. There is no off/on switch on the device. Once it is
plugged in, the device will remain on until the vehicle is shut off
or the battery is taken out from the car mount.
Connecting Power
Powering with Car Charger
Option A
Powering with Triple A battery
Option B
Triple A battery x 2
Placing the car mount horizontally or vertically
Releasing your phone
Clamping your phone
View Horizontally
View Vertically
Slide your phone to the bottom,
the telescopic arms will close
automatically
Note: if the telescopic arms do
not close automatically you
also could touch the release
button to clamp your Phone.
Put your phone into the
cradle, then simply touch
the release button to clamp
your phone
Simply touch the release
button, the telescopic arms
will open and then you can
take out your Phone
Product Overview
Telescopic Arm
Swivel Knob
Adjustable Handle
LED Indicator
Battery box
Air Vent Clip
Release Button
USB C P ort
Bottom Foot
Silicone Mat
2
7 8
3 4
5 6
/
