ZEEHOO ZHWC01 User manual

Type
User manual
15 16
Clean the dashboard/ windshield and peel the
protecve film from the sucon cup boom.
Surface
P
U
S
H
No Air Gap
Suction Cup
STEP 1
Push the sucon cup harder against the dashboard/
windshield surface ( flat surface prefered) and then pull
the locker twice to the boom to ensure the stability
STEP 2
Boom tray
Locker
Clean the dashboard and mount the sucon cup on the
dashboard. Please push the sucon cup harder against the
dashboard and push the locker to the boom
Insert the adjustable claw into your car’s air vent, adjust the car
mount to the opmal viewing angle make sure the claw is
inserted securely in posion.
Adjust the Vent Clip Horizontally/Vercally at a proper angle to
match the air vents, having the holder touch the vent boom
surface (not inserng it into the vent) so it can form a triangle
posion, then press and hold the Clip to insert into your car's air
vents making the claw more stable to hold your phone.
Horizontally air vents type
Vent Clip
Holder
Having the holder touch the vent boom
surface (not inserng it into the vent)
Vercally air vents type
Boom tray
If your phone wears a case, please adjust the boom tray to the
appropriate area for wireless charging , otherwise it may cause the
charging to stop or repeat the power-off charging phenomenon.
During use, please make sure that the charger will not be powered off
(like the adapter loose) , otherwise the automac arm will open
automacally, causing the phone to fall.
  • Page 1 1

ZEEHOO ZHWC01 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI