KOOTION U06f-Silver-64G-3.0 User manual
- Category
- USB flash drives
- Type
- User manual
Simple Manual for Fingerprint Flash Drive
1. Software Installation
First, to apply this fingerprint USB flash drive, users need to install the
relevant identifying software on your device. The required software
(Fingerprint-v1-1.0.0.3-Setup) is right in the usb drive.
2. Initial Use
1. Plug in and open the usb, then open the fingerprint identifying
software installed on your device, for the first time you use it, it will
pop up a window“Place Your Finger”(like picture 1). Follow the
instructions; press the fingerprint area with your finger at the end of
your usb drive for 10 times repeatedly. You’ll be told when it’s done
successfully (like picture 2).
2. Close the fingerprint identifying management software, when you
touch the fingerprint area with the right finger, the real usb memory
storage drive which is encoded with your fingerprint will show up on
your device; long-press it for 2 seconds, it will be invisible after
recognition.
Note: The first one who sets the fingerprint will be the default
administrator automatically. In addition, only administrator has
the privilege to manage the fingerprints.
Pic.1 Pic.2
3. Verify to Login
Plug in the USB flash drive and open the fingerprint identifying
software(Fingerprint-v1-1.0.0.3-Setup), there will be a fingerprint
verifying screen (like picture 3). The fingerprint icon becomes green (like
picture 4) if the administrator fingerprint verifies successfully. The
fingerprints of administrator and other users can be deleted by clicking
the “all-delete” icon or single-delete” icon in the user list. Please NOTE:
The last fingerprint can not be removed by single-deleting but by
all-deleting; once confirming to remove all at one time, there will be no
fingerprints anymore. As a consequence, it will go back to original state.
When you open this fingerprint system again, the fingerprint input page
shows up instead of the verifying page.
Pic.3 Pic.4
4. Administrator’s Privileges
After successful verification, users are ready to enter the user’s
interface (like picture 5). All the saved fingerprints information is
showed here.
1. The administrator is in charge of all the fingerprints information. At the
administrator’s interface, it shows “ON” at “Admin.” column. The
administrator can edit other users’ names in the column of “Name” to
distinguish.
2. The administrator can remove other users’ fingerprints by clicking the
corresponding trash icon. If there’s one user left in the list, only by
clicking the “all-delete” icon (marked with red in picture 6) can remove it.
The system will pop up “Delete All Users?”, and then click “OK”, all users
in the list will be removed.
Pic.5 Pic.6
5. Add a Fingerprint
Click＂+＂(marked with red in picture 7), it will show a message＂
Place Your Finger”, please lift and rest your finger 10 times(in
order to capture the full fingerprint)on the sensor repeatedly (like
picture 8).Then, a new fingerprint will be added.
Notice: The maximum number for fingerprints is 10-including the
admin’s.
Pic.7 Pic.8
6. Choose a Language：
Click on the button at the right bottom of photo 9（marked with yellow）
and you are available to select the language you know.
Pic.9 Pic.10
7. Specifications
product dimensions： 72.1*19.0*6.9mm
Package dimensions: 120*85*20mm
product weight： 20g
Material: Aluminum alloy +ABS
Interface: USB3.0
Transfer Speed: ≤ 5Gbps
Number of fingerprints can be recorded: 10
8. Range of Application
Operating temperatures： -4°F to 140°F (-20°C to 60°C)
Storage temperatures： -4°F to 158°F (-20°C to 70°C)
Humidity：20%RH-85%RH
9. Warranty
One year limited warranty (artificial damage and improper use are
not included) / One year limited warranty against material or
manufacturing defects.
-
1
-
2
-
3
-
4
-
5
KOOTION U06f-Silver-64G-3.0 User manual
- Category
- USB flash drives
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI