2-3h
Please use the included cable to recharge your
keypad for 2-3 hours or until red light turns o.
Solid red light means charging.
When solid red light turns o keypad is fully
charged
6
50h
The keypad can be continuously used for up to 50
hours between full charges.
Low battery is indicated by slow blinking blue light
5
Zzz
1h
To preserve battery life, the keypad will enter
automatically sleep mode after ~1 hour of inactivity.
Press any key to wake up the keypad
4
Open Bluetooth settings on your device to
complete connection process.
Connection is indicated by solid blue light for
~5 seconds, then light turns o
3
5s
Press and hold the “Connect” button for ~5 seconds
then release.
Fast blinking blue light means pairing mode
2
Move the power switch to the “On” position to turn
on the keypad.
1
BLUETOOTH EXTENDED KEYPAD FOR MAC
INSTRUCTIONAL GUIDE
-
1
