The Murphy Door FMFDAA48CSIS Operating instructions

FMFDAA48CSIS
Brand
The Murphy Door
Model
FMFDAA48CSIS
Type
Operating instructions
FLUSH MOUNT UNASSEMBLED KIT
ASSEMBLY INSTRUCTIONS
MurphyDoor.com888-458-5911
Looking for an installation video?
Scan this code to go directly to our door assembly
support page and view the installation video.
https://www.themurphydoor.com/assembly-video/
Parts List
Countersunk Screw Holes
(8) 7x50mm Conrmat Screws
A
B
C
(6) #6 x 1.5in Square Head Pocket Screws
D
(12) Dowel Pins
E
F
B
(18) 8mm Wood Dowels
G
Jamb Side
Jamb Side
Jamb Top
Jamb Bottom
(Threshold)
JAMB
BOOKCASE
Back
Bookcase Side
Bookcase Side
Top
Bottom
Short Side
Middle
Top
Bottom
Short Side
Middle
Back Top
(Double Thick)
Back Middle
Adjustable Shelf Adjustable Shelf Adjustable Shelf
FACE FRAME
Top
Bottom
Long SideShort Side
Middle
Casing Side
Casing Side
Casing Top
Long Side
Long Side
Back Bottom
(Double Thick)
Bottom
Door Hinge
Bottom
Jamb Hinge
Top Door
Hinge
Top Jamb
Hinge
2 Notches
MurphyDoor.com888-458-5911
NOTE: French Doors will include a longer upper jamb and threshold as
well as a center trim/casing piece.
8
Out-Swing Hinges
Front
Top of Door
Front
Top of Door
Front
Jamb Bottom
(Threshold)
Front
Jamb Bottom
(Threshold)
B B
B
B
These extra pre-drilled holes are only used for in-swing hinge conguration.
These extra pre-drilled holes are only used for in-swing hinge conguration.
OUT-SWING OUT-SWING
LEFT HINGE RIGHT HINGE
MurphyDoor.com888-458-5911
1) Insert pin through rst hinge plate 2) Rotate 180° 3) Insert pin through second hinge plate 4) Rotate 90° 5) Pull pin down into notch to secure it in place.
Placing Pin in Upper Hinge
Make sure that notches are facing the top of door.
You may need to punch holes for hinge pin to pass through
8
In-Swing Hinges
Front
Top of Door
Front
Top of Door
Front
Jamb Bottom
(Threshold)
Front
Jamb Bottom
(Threshold)
Pre-drilled pattern with hinge pin pass-through hole are only used for out-swing hinge conguration.
BB
B B
IN-SWING IN-SWING
These extra pre-drilled holes are only used for out-swing hinge conguration.
LEFT HINGE RIGHT HINGE
MurphyDoor.com888-458-5911
OUT SWING
IN SWING
DOOR SIDE
DOOR BACK
DOOR FRONT / FACE FRAME
VIEW OF
DOOR
BOTTOM
DOOR BOTTOM
Hinges on Left
MurphyDoor.com888-458-5911
NOTICE: Due to variations in individual printer settings we cannot
guarantee that the printed template will be scaled properly. Please
use the included measurements to verify proper placement.
OUT SWING
IN SWING
DOOR SIDE
VIEW OF
DOOR
BOTTOM
DOOR BACK
DOOR FRONT / FACE FRAME
DOOR BOTTOM
Hinges on Right
MurphyDoor.com888-458-5911
NOTICE: Due to variations in individual printer settings we cannot
guarantee that the printed template will be scaled properly. Please
use the included measurements to verify proper placement.
MurphyDoor.com888-458-5911
NOTICE: Due to variations in individual printer settings we cannot
guarantee that the printed template will be scaled properly. Please
use the included measurements to verify proper placement.
THRESHOLD HINGE TEMPLATE
Hinges on Right
PLACE IN FRONT CORNER
4”
IN-SWING
OUT-SWING
THRESHOLD
HINGE TEMPLATE
PLACE IN FRONT CORNER
IN-SWING
OUT-SWING
THRESHOLD
HINGE TEMPLATE
MurphyDoor.com888-458-5911
NOTICE: Due to variations in individual printer settings we cannot
guarantee that the printed template will be scaled properly. Please
use the included measurements to verify proper placement.
THRESHOLD HINGE TEMPLATE
Hinges on Left
Ogden Headquarters
2541 Rulon White Blvd
Ogden, UT 84404
Kentucky Distribution
Center & Showroom
2320 Fortune Dr. #180
Lexington, KY 40509
MurphyDoor.com888-458-5911
FMAM-1.7.2-20170206
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

The Murphy Door FMFDAA48CSIS Operating instructions

FMFDAA48CSIS
Brand
The Murphy Door
Model
FMFDAA48CSIS
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents