Rubbermaid 1801776 User manual

Type
User manual
Decorative Bracket Installation
Select your bracket quantity, size, and style.
1
Partially install Screw A into marked holes at stud
locations leaving a small gap for bracket adjustment.
4
Rest shelf on brackets. Use screws B provided
to secure the board to the brackets.
6
3
Locate wall studs and mark mounting locations of the
top hole of the brackets, ensuring the holes are level.
You should install brackets into all possible studs along
the length of your shelf for stated load capacities.
2
Select your shelf size and color.
For 10" deep board installations: Mount the 8" side of the 6" x 8"
bracket to the board. Mount the 6" side directly to the wall.
For 8" deep board installations: Mount the 6" side of the 6" x 8"
bracket to the board. Mount the 8" side directly to the wall.
5
Place the top hole of the bracket onto screw and push down
to secure. Use screws A to secure the bottom of the bracket
into the stud. Tighten down the top screw.
16" center
to center
Tools needed:
Each bracket comes with the following installation hardware:
Description Letter Quantity
1.25" Screw A 2
.5" Screw B 2
B
A
BB
A
A
8"
6"
8"
10"
8"
6"
  • Page 1 1

Rubbermaid 1801776 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI