ESP 71101 User manual

ESP
Brand
ESP
Model
71101
Type
User manual

ESP 71101 is an electronic device that features include Time switch with Astro function and is designed to control lighting and other electrical devices based on a programmable schedule and astronomical events. These key capabilities of ESP 71101 enable users to achieve the following benefits:

  • Automated Lighting Control: With programmable switching times, ESP 71101 can automate the turning ON and OFF of lights, creating a convenient and energy-efficient lighting system.

  • Astro Function: The built-in Astro function allows ESP 71101 to adjust its switching times based on the sunset and sunrise times for a specific location. This ensures that outdoor lighting, such as garden lights or streetlights, turns ON at dusk and OFF at dawn, providing optimal illumination while saving energy.

ESP 71101 is an electronic device that features include Time switch with Astro function and is designed to control lighting and other electrical devices based on a programmable schedule and astronomical events. These key capabilities of ESP 71101 enable users to achieve the following benefits:

  • Automated Lighting Control: With programmable switching times, ESP 71101 can automate the turning ON and OFF of lights, creating a convenient and energy-efficient lighting system.

  • Astro Function: The built-in Astro function allows ESP 71101 to adjust its switching times based on the sunset and sunrise times for a specific location. This ensures that outdoor lighting, such as garden lights or streetlights, turns ON at dusk and OFF at dawn, providing optimal illumination while saving energy.

71101 - Time switch with Astro function - 17.5mm
User Instructions
Fit & forget...
Safety Instructions
! The installation and assembly of electrical equipment must be only carried
out only by a skilled Person! Otherwise re danger or danger of an electric
shock exists!
! Connect the supply voltage/frequency as stated on the product label!
! Warranty void if housing opened by unauthorised person!
! The electronic circuit is protected against a wide range of external
inuences. Incorrect operating may occur if external inuences exceed
certain limits!
Connection Diagram
Initial Operation & Setting
The time switch is delivered in sleep-mode, the display is switched o.
Press ‘OK’ button for 1 second to activate display.
• Note: By pressing ‘M’ you move one step backwards in display menu.
• Note: By pressing ‘-’ or ‘+’ you adjust a value or make a selection
• Note: By pressing ‘OK’ you accept a setting
Select desired language (English is default)
Accept date, adjust to GB time & accept Europe S/W time (European Daylight
Saving). Automatic Summer/Winter time change active.
For Astro function to work you need to enter the geographical position for
the installation. You can choose between “location” (to select pre-dened
countries & cities) and “co-ordinates” (to enter longitude and latitude data).
The easiest way is to select “location”.
Select Great Britain and the nearest city to you from the preset locations:
Aberdeen/Belfast/Birmingham/Bristol/Caernarfon/Carlisle/Glasgow/
Inverness/Lincoln/London/Manchester/Newcastle/Dublin/Tullamore.
Selecting “Astro Preprogrammed” function will pre-set the Astro On &
O settings for the whole week (with no oset). Using “Program Modify”
function you can adjust later if required.
Selecting “Astro Not Preprogrammed” function will allow the user to set the
Astro On & O settings as desired using the New Program menu.
Data is saved and unit returns to main screen.
Adjustmen
E
Date-Time
E
Summertim
E
Astro
E
Language
E
Defaults
Factory
end
Program
p
Program
p
new
query
p
Program
modify
p
Program
delete
p
Program
end
Options
O
Menu
Enter-Mode
Automatic-Mode
end
switching
Extra
O
Counter
O
PIN-Code
O
end
a
f
f
24.08.09
Monday
Main Overview
Symbol Legend
Menu Program
New Program See “New Program” section (over)
Program Query To query the programming steps and remaining
memory locations
Program Modify Within Program modify each single switching
time can be modied
Program Delete Deletion of switching time(s). The program
for all channels, single channels and single
programming steps within on channel can be
deleted
Menu Adjustment
Date/Time Adjustment of date and time
Summer Time Adjustment of the daylight saving time mode
Astro Adjust your geographical position with pre-
dened choice of regions/countries and cities or
with longitude, latitude and time zone
Language Choice of languages
Factory Defaults Reset to the state of delivery. Date, time and
switching program will be lost!
Menu Options
Extra Switching Time See ‘Extra Switching Time’ section
Counter Displays the hour counter and pulse counter for
each channel and the time switch itself
Program Modify The time switch can be locked with a 4-digit
PIN-Code. The code can be adjusted, activated
and deactivated. If you have forgotten the Code
please call customer service
Key Function
Automatic Mode
M
To access the Enter-mode (program, adjustments, options)
from the automatic-mode
A
To switch the channel ON or OFF until the next programming
step occurs
OK
To activate the time switch when operated without power
supply
Menu / Enter-Mode
)
To revert to the beginning of the current (sub-) menu
-/+
To adjust the ashing digit. To scroll through a choice
*
To conrm the selection or the entered data
SERVICE AND WARRANTY
Your product is not user serviceable. PLEASE DO NOT TRY TO DISMANTLE THE UNIT.
This product is guaranteed by your supplier for 5 years from the date of manufacture. If it should become defective
please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns
This product must meet Waste Electronic and Electrical Equipment Regulations (WEEE) for suitable environmental
recycling, recovery and/or disposal. End of life products should be handled in line with local regulations. Alternatively
return end of life product to Sangamo for correct disposal.
CUSTOMER CARE POLICY
As part of Sangamo’s continuous improvement program, the company operates a Customer Care policy. This means we
welcome your comments and complaints, as it can help us to improve our services to you, our customer.
Due to our policy of continuous product improvement and development, the specications in this guide may be subject
to change without prior notice.
Sangamo Limited
Industrial Estate, Port Glasgow,
Renfrewshire, PA14 5XG
Tel 01475 745131
Fax: 01475 744567
Email: [email protected]
Web: www.sangamo.co.uk
WEE/JH0069TY
143690 Issue B
If you have a problem or require
any further information please
contact us on: 01475 745131
Channel ON/OFF/Permanent P
Channel ON/OFF
By pushing ‘A’ button a manual switch of the channel takes place. The
resulting switching status is marked with the hand-symbol and remains until
the next programming step occurs. (temporary over-ride)
Permanent switching status P
By pressing the channel button ‘A’ for more than 3 sec. the channel is
permanently switched ON or OFF. The status remains until the action is
repeated. (permanent over-ride)
Program Holiday
One permanent by date programming step (holiday function) is possible.
During the desired period (The function is valid for the whole days) the
channel can be switched o (permanent o) or on (permanent on). The
choice of permanent will not be oered anymore within the menu program
when already in use. The switching time can be modied and deleted within
Program modify and Program delete respectively. (See ‘New Program’
section)
Extra Switching Time
You can program further extra switching times, e.g. if you like to use a channel
of the time switch for a non-Astro lighting-application. You have to activate
the ‘Extra Switching Times’ within the Menu Options. The extra switching
times works like a standard weekly program (ON/OFF). Aer activating the
‘Extra Switching Time’ it will be oered within the programming menu ‘New
Program’. (See ‘New Program’ section)
Reset Function
Press all front keys for 2 seconds. The time switch is reset. The values for date
and time will be deleted and have to be re-entered. The switching program
has not been deleted!
New Program
p
a
offset
x
12§45&/
10
:
00
p
a
hour
x
12§45&/
10
:
00
time
p
a
minute
x
12§45&/
111
:
30
time
p
a
hour
y
12§45&/
10
:
00
A
time
p
a
minute
y
12§45&/
123
:
15
time
p
a
offset
y
12§45&/
10
:
00
Program
astro ON
at sunset
astro OFF
at sunrise
Night
ON
Night
OFF
Extra
ON
new
program
channel A
Extra
OFF
permanent
See point 7
p
a
hour
x
12§45&/
10
:
00
A
time
p
a
minute
x
12§45&/
15
:
30
time
p
a
hour
y
12§45&/
10
:
00
time
p
a
minute
y
12§45&/
113
:
45
time
p
CONTROL
CHECK BACK
12345
ASTROPROGRAM:
BLOCK PROGRAMMING:
OFFSET:
The astro function allows you to switch the whole year
through in relation to sunset and sunrise, e.g. for
illumination purposes (astro-ON with sunset and astro-
OFF with sunrise)
Activation or deactivation of the weekday (1…7) on
which the switching time should happen. With the +/-
keys you can change from activate “yes” to deactivate
“no”. Confirm each day with OK
While programming an astro program step there will be
no daytime (hh:ss) suggested. Instead of this you have
the possibility to enter an offset. E.g. if you like to
switch on the light 20 minutes before sunset you have
to enter an offset of minus 20 minutes while
programming astro ON.
67
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
x
12§45&/
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
y
12§45&/
A
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
x
12§45&/
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
y
12§45&/
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
x
12§45&/
yes
p
a
Monday
x
A
1234567
yes
p
a
Tuesday
x
A
1234567
no
p
a
Wednesday
x
A
1234567
A
yes
p
a
Thursday
x
A
1234567
yes
p
a
Friday
x
A
1234567
no
p
a
Saturday
x
A
1234567
no
p
a
Sunday
y
12§45&/
edit
p
a
switching
x
A
12345&/
18
:
56
delete
p
switching
next
switching
p
end
end
ASTROPROGRAM EXTRAPROGRAM
[Extra switching time]
PERMANENT
Optionally selectable
(See Point 7)
a
f
f
24.08.09
Monday
Battery
CR 1/3 N (LiMnO
2
) 3 V.
Complies with Article 11, EU directive 2006/66/CE
Screen skipped
in Astro Pre-
Programmed mode
1 - You can use the - or + to skip a program
choice and go to next program choice (e.g. if
night off, night on not required)
2 - Use Program Modify to adjust Pre-
Programmed Astro ON/OFFs later if required.
Screen skipped
in Astro Pre-
Programmed mode
  • Page 1 1
  • Page 2 2

ESP 71101 User manual

ESP
Brand
ESP
Model
71101
Type
User manual

ESP 71101 is an electronic device that features include Time switch with Astro function and is designed to control lighting and other electrical devices based on a programmable schedule and astronomical events. These key capabilities of ESP 71101 enable users to achieve the following benefits:

  • Automated Lighting Control: With programmable switching times, ESP 71101 can automate the turning ON and OFF of lights, creating a convenient and energy-efficient lighting system.

  • Astro Function: The built-in Astro function allows ESP 71101 to adjust its switching times based on the sunset and sunrise times for a specific location. This ensures that outdoor lighting, such as garden lights or streetlights, turns ON at dusk and OFF at dawn, providing optimal illumination while saving energy.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents