NO. 30127X
Assembly Instructions
Assemble the first set of tubes as parts 1 & 2 . This will
create the back base.
Insert tapered tubes part 4 into part 2 of the back
base and insert part 3 into part 1 of the back base.
After assembling the second set of tubes part 1 and 2 ,
place part 1 on the tapered section of part 3 and part 2
on the tapered section of part 4 to complete the
frame assembly
1
1
PART QTY DESCRIPTION
1 2 L Shape Tube press button on tapered end
2 2 L Shape Tube perforated end
3 1 Folding Corner Piece,left press button on tapered end
4 1 Folding Corner Piece,right press button on both
tapered ends
5 1 Mesh Net
6 4 U Shape Ground Stake
7 30 Self-Stick Closure Strips
8 2 Lock Pin
9 2 Screw (Pre-assembled in Part 3 & 4 )
10 2 Bolt (Pre-assembled in Part 3 & 4 )
8
9
10
8
/
