A time-trusted, reliable system.
For decades, Legrand infloor systems
have proven to be ideal solutions for
call centers — allowing open spaces
to perform flawlessly. Infloor systems
have a series of distribution and feeder
ducts encased in concrete under
the floor. Activations that lead from
openings in the ducts — called presets
— provide visible connection points.
Greater flexibility. Less disruption.
An infloor system runs throughout
a floor — so adding connectivity
is as simple as activating presets.
Infloor systems designed by Legrand
experts often have presets every 24
inches on center. So whether a row
of cubicles shifts or a new network
printer is needed at a specific location,
connectivity is nearby.
A typical installation only has 15
to 20 percent of presets activated
initially. The rest are set up with
future expansion in mind. And unlike
immovable poke-thru systems and
floor boxes, there’s no need to core
drill or jackhammer through the floor
to add connectivity.
Call centers have hundreds or even thousands of small workstations in close proximity — with each station requiring power and data. These spaces
are not only high-density, they’re constantly evolving. Workstations shift to new configurations. And rapidly changing technology requires the
installation of new equipment needing access to wiring and cabling.
Activating a preset is easy:
1. Chip out less than an inch of concrete.
2. Pull cables to preset location.
3. Install a service fitting.
A flexible, robust system is
key to preserving the design
vision and functionality
of your call center space.
Legrand has a solution that’s
designed to be better
™
.