Hampton Bay FG-MDLGDR Operating instructions

Seat and Back Frame

Base Frame Seat Cushion

Back Cushion

M6x30 mm Bolt

M6 Flat Washer

M6 Plastic Washer

Socket Wrench

Amelia Springs Loveseat Glider

Attach the Seat and Back Frame (A) to the Base Frame (B) with the M6x30mm Bolts (AA), M6 Flat Washers (BB), M6

Plastic Washers (CC) using the Socket Wrench (CC). Completely tighten all the Bolts (AA).

Place the Seat Cushions (C) and the Back Cushions (D) on the glider. Your glider is ready for your enjoyment.

1 ASSEMBLING THE SEAT AND BACK FRAME TO THE BASE FRAME

2 FINISHING THE ASSEMBLY